- Discrete Zone Audio Control and Routing
- Three Outputs with Euroblock Connectors
- Three Input Channels
- Bluetooth® Antenna for Stable Wireless Connectivity
- Dual Mic Inputs with Euroblock Connectors
- 3 Band EQ, Gain Control and High Pass Filter Switch
- Talkover Function for Voiceover Clarity During Announcements
- Simple Layout for Ease of Operation
- Compact 1U Rack Mount Size

- Recording media: microSD card (64 MB-2 GB)
microSDHC card (4-32 GB)
microSDXC card (48-128 GB)
- Recording/playback formats: BWF: 44.1/48/96 kHz, 16/24 bit
WAV: 44.1/48/96 kHz, 16/24 bit
MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbit/s
Number of channels: 4 channels (2 × stereo)

- Sampling frequencies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
- Quantization bit depth: 16/24 bit
- Mic inputs 1/2 (balanced): XLR-3-31 (1: GND, 2: HOT, 3: COLD), 6.3-mm standard TRS stereo jack (Tip: HOT, Ring: COLD, Sleeve: GND)
- Instrument inputs 1/2 (unbalanced): 6.3mm standard TS jacks (Tip: HOT, Sleeve: GND)

Recording media:
- microSD card (64 MB-2 GB)
- microSDHC card (4-32 GB)
- microSDXC card (48-128 GB)
Recording/playback formats:
- WAV: 44.1/48/96 kHz, 16/24 bit
- MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbit/s
Number of channels: 2 channels (stereo)

Recording media:
- microSD card (64 MB-2 GB)
- microSDHC card (4-32 GB)
- microSDXC card (48-128 GB)
Recording/playback formats:
- WAV: 44.1/48/96 kHz, 16/24 bit
- MP3: 44.1/48 kHz, 32/64/96/128/192/256/320 kbit/s
Number of channels: 2 channels (stereo)
External Mic input (can provide plug-in power): 3.5-mm stereo mini jack
Headphones / Line output: 3.5-mm stereo mini jack

- Number of channels and formats: 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit
- Analogue outputs (ANALOG OUT): ML-4D/OUT-E: Balanced Euroblock connectors, 3.81 mm pitch
ML-4D/OUT-X: XLR connectors (XLR-3-32, 1: GND, 2: HOT, 3: COLD)
- Nominal output level: +4 dBu (Ref(D) ? -9 dBFS), +6 dBu (Ref(D) = -9 dBFS)

- Recording media: SD (512 MB-2 GB)
SDHC (4-32 GB)
SDXC (64-128 GB)
Class 10 or higher required
- File system: FAT16 (SD), FAT32 (SDHC), exFAT (SDXC)
- Recording file format: WAV
- Playback format: WAV
- Sampling frequency: 44.1 kHz, 48 kHz
- Bit depth: 16 bit, 24 bit
- Recordable channels: 24 channels max. (22 channels + stereo mix)

- Microphone inputs 1-2: Balanced: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Unbalanced: 6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
- Input impedance: 33 kO
- Nominal input levell: -65 dBu (VOLUME knob at MAX)
Unbalanced: -30 dBu (VOLUME knob at MIN)
- Line inputs (unbalanced): RCA pin jacks
- Nominal input level : -10 dBV
- Maximum input level: 10 dBV
- Input impedance: 22 kO

- Main microphone input: Balanced: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Unbalanced: 6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
- Input impedance: 33 kO
- Nominal input levell: -65 dBu (VOLUME knob at MAX), -30 dBu (VOLUME knob at MIN)
- Mic/Line inputs (balanced): XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Set to Mic
- Maximum input level: -30 dBu
- Minimum input level: -65 dBu

- Dante-enabled stage box and interface with 16 analogue audio inputs and outputs
- Redundant Dante operation using Primary/Secondary lines
- Equipped with etherCON-compatible connectors
- Support for Dante Domain Manager
- AES67 is supported to allow connection with Ravenna and other compatible audio network technologies
- Data transfer compliant to SMPTE 2110
- 16 balanced mic/line inputs (XLR) with switchable phantom power (48 V), input signal and overload indicators
- 16 balanced line outputs (XLR) with output signal indicators
- Up to 96 kHz sampling frequency at 32-bit resolution
- Can be positioned on the floor or mounted in a rack (3U)
- Fully controllable from connected Sonicview mixer
- Remote control and offline editing using Tascam IO Control software for Windows, macOS and iPadOS
- Selectable reference level
- GPIO interface with eight inputs and outputs, expands to 16 inputs and outputs when connected to a Sonicview mixer
- Selectable LED brightness
- DC input for redundant power supply (DC power supply not included)

The TASCAM SS-R250N is one of the most advanced solid-state recorders on the market, using technology like Dante and networking to integrate into any commercial environment. Designed for the Broadcast and Contractor markets, the SS-R250N records in WAV & MP3 to SD/SDHC/SDXC cards or USB memory. Parallel and RS-232C serial control - along with flash start, balanced & unbalanced I/O, and coaxial di

- Type: Closed
- Driver: 50mm diameter
- Impedance: 32Ω
- Sensitivity: 98dB ±3dB
- Frequency response: 18Hz to 22kHz
- Maximum input power: 600mW
- Cable length: Approx. 9.8 ft. / 3 m (fixed)
- Accessories: Plug adapter (1/8" to 1/4")

- Mic/Line inputs: 2 × XLR/TRS combo connectors (balanced, XLR with individually switchable 48 V phantom power)
- Additional mic input: 1 × 3.5-mm 3-pole mini-jack (supports 2.7 V plug-in power)
- Digital audio output: via accessory shoe (CA-XLR2d-C and CA-XLR2d-F only)
- Line/headphones output: 1 × stereo mini-jack
- Sampling rate, bit width: 48/96 kHz, 16/24 bit (according to camera setting)
- Mic preamp EIN (equivalent input noise): ≤–120 dBu (150 Ω, GAIN at max., A-weighted)
- Dynamic range: ≥95 dB (22-kHz LPF, A-weighted)
- Freq. response (XLR to digital input): 20 Hz to 20 kHz +0.5 dB / –1 dB (Fs = 48 kHz), 20 Hz to 40 kHz +0.5 dB / –1 dB (Fs = 96 kHz)
- Power supply: Power through accessory shoe of compatible camera, 2 AA batteries (alkaline, NiMH or lithium-ion)
- Power consumption: 2 W (max.)

Audio channels/tracks 6 input channels, 8 recording tracks (6 + stereo mix)
Microphone inputs 4 × XLR/TRS (24 V or 48 V phantom power can be selected individually)
2 × Detachable large-diaphragm condenser mics (can be set to A-B or X-Y position)
Line inputs 4 × 6.3-mm TRS jacks (balanced)
Additional stereo input 1 × 3.5-mm mini-jack (CAMERA/EXT IN)
Line output 1 × stereo mini-jack (CAMERA/LINE OUT)
Headphones output 1 × stereo mini-jack, 45 mW + 45 mW, with level control
Built-in speaker 0.4 W (mono)
USB audio interface mode 8 inputs, 2 outputs
Recording format WAV (BWF): 44.1/48/96/192kHz, 16/24 bit or 32 bit floating point
MP3: 44.1/48kHz, 128/192/256/320 kbit/s
Frequency response (mic inputs 1–4) Fs 48 kHz: 20 Hz – 20 kHz, +0/−0.3 dB (JEITA)
Fs 192 kHz, 20 Hz – 60 kHz, +0.5/–2.5 dB (JEITA)
S/N ratio up to 109 dB
Distortion (THD+N, 1 kHz) 0.005 % (mic inputs 1–2), 0.006 % (mic inputs 3–6)
Bluetooth dongle slot For optional Bluetooth adapter (AK-BT1)
Power supply 4 × AA batteries (alkaline, Ni-MH or lithium-ion), USB bus power from a computer,
AC adapter (TASCAM PS-P520U, sold separately)
Power consumption 7.5 W (maximum)
Approx. battery operation time (Alkaline/Lithium) 11 hours / 18 hours (Included mics, phantom power off, stereo WAV recording at 44.1 kHz / 24-bit)
Dimensions (W × H × D, overall) 83 mm × 206 mm × 42 mm
Weight 472 g (with batteries)
381 g (without batteries)

- Dual cassette recorder/player
- Formaat: 19 inch rack (3U)
- USB-output (USB 2.0) voor opname richting computer
- Microfooningang (6.3 mm) voor karaokedoeleinden
- RCA inputs en outputs
- Ruisonderdrukking (equivalent aan Dolby B NR)
- Inclusief:
afstandsbediening met AAA-batterijen
rackware
handleiding
- Systeemeisen:
Windows 7, 8, 8.1, 10
Mac OS X vanaf 10.7
- Afmetingen: 482 x 1

- Number of channels and format: 4 channels, 44.1 kHz, 48 kHz, 16/24-bit / 2 channels (double speed), 88.2 kHz, 96 kHz, 16/24-bit. - Input impedance: 110

The caddy includes a USB 3 jack for stand-alone use – simply hand the drive to the client to offload the BWAV files into their DAW session.

Dust Cover Model 16

Dust Cover Model 24

- shoe mount adapter
- Stereo mini cable
- attenuator cable
- Splitter cable
- Portable soft case
- Furry windscreen

- Power adaptor
- Portable soft case
- Furry windscreen

- Fuzzy windscreen for reduction of wind noise
- Shoe mount adapter that can be attached to a camera accessory shoe or the recorder
- 3.5mm stereo mini jack cables for recording to - and monitoring from - a DSLR camera.

Rack Mount Kit Model 16

19" Rackmount to mount 2 DCP devices next to each other

- Frequency response: 20 Hz to 20 kHz, ±0.5 dB
- Signal-to-noise ratio: > 96 dB (JEITA)
- Total harmonic distortion: < 0.03 % (1 kHz, JEITA)
- Dynamic range: > 96 dB (JEITA)
- Channel separation: > 89 dB
- Power consumption: 30 W
- Dimensions: 483 mm × 44 mm × 281 mm
- Weight: 2.8 kg
- Operating temperature: 5 - 35 °C

- Front connectors: 16 balanced XLR panel jacks (XLR-3-31, female)
- Pin assignment: 1: Ground, 2: Hot (+), 3: Cold (-)
- Rear Connections: Two 25-pin Sub-D connectors, female
- Locking screws: No. 4-40 UNC (inch thread)

- 16 XLR output connectors on the front panel
- Dual D-Sub input connectors compliant with AES59-2012 on the rear panel
- Multiple rackmounting options
- Short unit depth allows free layout in the rack
- 1U Rackmount size
- Rackmount screws included