- Model: Condenser
- Polar pattern: Cardioid
- Frequency Response: 20Hz - 20,000Hz
- Output impedance: 200Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Sensitivity: -38dB +/-2dB (0dB=1V/Pa at 1kHz)
- Self noise: 17dB A
- Max. SPL: 136dB (at 1kHz=1% THD)
- S/N ratio: 77dB
- Housing: Die cast zinc
- Dimensions: 48(W) × 165 (H) × 48 (D) mm
- Weight: 300g
- Accessories: SHOCK MOUNT, MINI DESK STAND, MIC CABLE, Owner’s manual (The warranty is included at the end of this manual)

- Transducer type: Dynamic
- Polar pattern: Cardioid
- Frequency response: 50 Hz to 16 kHz
- Sensitivity: -53 dB ±3 dB (0 dB = 1 V/Pa at 1 kHz)
- Output impedance: 300 Ohm ±30 % (at 1 kHz)
- Dimensions (L × Ø): 170 mm × 51 mm
- Weight: 272 g
- Included: Mic holder

- Ideal for personal broadcasting with two or more persons
- Half super-cardioid polar pattern
- Unobtrusive design and colour, only 24 mm high, perfect for video podcasts
- Frequency response optimised for speech
- High sound pressure resistance
- Switchable low-frequency filter on bottom side (CUT/FLAT/BOOST)
- Requires phantom power (DC 9-52 V)
- Dedicated connection cable included

- Ideal for miking your broadcast programme
- Uni-directional polar pattern
- Flexible gooseneck for individual adjustment
- Includes a stable stand with integrated on/off switch
- Requires phantom power (DC 48 V)
- Windscreen to suppress pop noise
- 133 × 458 × 140 mm - 970g

- SSD designed for DA-6400/DA-6400dp
- TSSD-240A: Recording capacity of up to 7 hours 12 minutes (@48 kHz/24-bit, 64-channel recording)
- TSSD-480A, TSSD-480B: Recording capacity of up to 14 hours 26 minutes (@48 kHz/24-bit, 64-channel recording)
- Optimized drive design for longer durability and stability under repetitive use

Ultra-HDDA (High Definition Discrete Architecture) mic preamps with -125dBu EIN
Eight Ultra-HDDA mic pres with XLR connectors, eight TRS inputs
Standalone mode for use as an independent mic preamp
Up to 96kHz/24-bit recording
Support for Windows and Macintosh
USB 2.0 computer connection
Connect with iPads and other iOS devices via Class Compliant drivers
+48V phantom power available

- Advanced version of our popular US-1x2 with
even better sound quality
- Can be used with Windows, Mac, iOS, iPadOS
- Sampling rates up to 192 kHz / 24 bit
- Inputs: 1 × XLR with switchable 48 volt
phantom power, 1 × TRS switchable between
Line (balanced) and Instrument, alternatively 2
× RCA on the rear
- Outputs: Stereo Line out (RCA)
- Low-latency monitoring function

- Advanced version of our popular US-2x2 with
even better sound quality
- Can be used with Windows, Mac, iOS, iPadOS
- Sampling rates up to 192 kHz / 24 bit
- Inputs: 2 × XLR/TRS (balanced) for Mic/Line/
Instrument level, 48V phantom power, each
input switchable on/off by software
- Outputs: 2 × TRS jacks (balanced), configurable
by software
- Low-latency monitoring function

- Advanced version of our popular US-4x4 with
even better sound quality
- Can be used with Windows, Mac, iOS, iPadOS
- Sampling rates up to 192 kHz / 24 bit
- Inputs: 4 × Mic (XLR) or Line (TRS, balanced),
48V phantom power, jack inputs 1/2
switschable to instrument, inputs each
switchable on/off by software
- Outputs: 4 × Line (TRS, balanced), configurable
by software

Streams Full HD (1920 × 1080p) video signals encoded to H.264 with bit rates up to 30 megabits

Streams 4K/UHD (3840 × 2160p) video signals encoded to H.265

Windscreen for DR series recorders
EAN: 4907034120222

Rack-mounting kit for the Compact Commercial Series

The BD-MP1MKII is a robust, single-rackspace multi-media video player for professional applications like permanent installation in the contractor market and touring.

Building on the success of the Tascam BD-01U and BD-MP1, this high-definition playback device can be controlled via LAN, RS-232C and a wireless remote control, making it an ideal component of integrated media systems and a reliable video player for commercial AV, education, house of worship, boardroom and other high-stress installs or live touring.

hot shoe adaptor for cameras with analog input for CA-XLR2d

A/D conversion
Sampling frequency
48 kHz / 96 kHz
Bit width
16 bit, 24 bit (Fs and bit width are synchronized with the settings of the connected camera)
Number of audio channels
2
Analogue audio inputs
Mic inputs 1, 2 (balanced)
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
(phantom power available)
Input impedance
≥2 kΩ
Maximum input level
+6 dBu (ATT set to 46 dB)
Minimum input level
–60 dBu (ATT set to 0 dB)
Gain range
66 dB
Line inputs 1, 2 (balanced)
6.3-mm standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
(phantom power not available)
Input impedance
≥10 kΩ
Maximum input level
+24 dBu
Rated input level
+4 dBu
Gain range
66 dB
Mic input 3 (unbalanced)
3.5-mm 3-pole mini jack (supports plug-in power)
Input impedance
≥2 kΩ
Maximum input level
+6 dBV (ATT set to 46 dB)
Minimum input level
–60 dBV (ATT set to 0 dB)
Gain range
66 dB
Plug-in power
2.7 V
(0 dBu = 0.775 Vrms)
Analogue audio outputs
Headphones/Camera output
3.5-mm stereo mini jack
Output voltage
0.29 Vrms (fixed, when set to headphones)
0.5 Vrms (output volume max., when set to camera)
Headphones impedance
16–250 Ω
Audio performance
Mic preamp EIN (equivalent input noise)
≤–120 dBu (150 Ω, GAIN at max., A-weighted)
Dynamic range
≥95 dB (22-kHz LPF, A-weighted)
Frequency response (XLR to digital input)
20 Hz to 20 kHz +0.5 dB / –1 dB (Fs = 48 kHz)
20 Hz to 40 kHz +0.5 dB / –1 dB (Fs = 96 kHz)
Power supply and other specifications
Power supply
2 AA batteries (alkaline, NiMH or lithium-ion)
Power through accessory shoe of compatible camera
Power consumption
2 W (maximum)
Dimensions (w × h × d, without protrusions)
88 mm × 119 mm × 110 mm
Weight
CA-XLR2d-C: 341 g
CA-XLR2d-F: 331 g
CA-XLR2d-AN: 357 g
Operating temperature range
0–40 °C
Included items
CA-XLR2d-C (Canon Kit)
CA-XLR2d unit*
CA-AK1-C accessory shoe mount adapter (attached to unit)*
CA-AK1-AN cold shoe mount adapter*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable
CA-XLR2d-F (Fujifilm Kit)
CA-XLR2d unit*
CA-AK1-F accessory shoe mount adapter (attached to unit)*
CA-AK1-AN cold shoe mount adapter*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable
CA-XLR2d-AN (Analogue Kit)
CA-XLR2d unit*
CA-AK1-AN cold shoe mount adapter (attached to unit)*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable

A/D conversion
Sampling frequency
48 kHz / 96 kHz
Bit width
16 bit, 24 bit (Fs and bit width are synchronized with the settings of the connected camera)
Number of audio channels
2
Analogue audio inputs
Mic inputs 1, 2 (balanced)
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
(phantom power available)
Input impedance
≥2 kΩ
Maximum input level
+6 dBu (ATT set to 46 dB)
Minimum input level
–60 dBu (ATT set to 0 dB)
Gain range
66 dB
Line inputs 1, 2 (balanced)
6.3-mm standard TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
(phantom power not available)
Input impedance
≥10 kΩ
Maximum input level
+24 dBu
Rated input level
+4 dBu
Gain range
66 dB
Mic input 3 (unbalanced)
3.5-mm 3-pole mini jack (supports plug-in power)
Input impedance
≥2 kΩ
Maximum input level
+6 dBV (ATT set to 46 dB)
Minimum input level
–60 dBV (ATT set to 0 dB)
Gain range
66 dB
Plug-in power
2.7 V
(0 dBu = 0.775 Vrms)
Analogue audio outputs
Headphones/Camera output
3.5-mm stereo mini jack
Output voltage
0.29 Vrms (fixed, when set to headphones)
0.5 Vrms (output volume max., when set to camera)
Headphones impedance
16–250 Ω
Audio performance
Mic preamp EIN (equivalent input noise)
≤–120 dBu (150 Ω, GAIN at max., A-weighted)
Dynamic range
≥95 dB (22-kHz LPF, A-weighted)
Frequency response (XLR to digital input)
20 Hz to 20 kHz +0.5 dB / –1 dB (Fs = 48 kHz)
20 Hz to 40 kHz +0.5 dB / –1 dB (Fs = 96 kHz)
Power supply and other specifications
Power supply
2 AA batteries (alkaline, NiMH or lithium-ion)
Power through accessory shoe of compatible camera
Power consumption
2 W (maximum)
Dimensions (w × h × d, without protrusions)
88 mm × 119 mm × 110 mm
Weight
CA-XLR2d-C: 341 g
CA-XLR2d-F: 331 g
CA-XLR2d-AN: 357 g
Operating temperature range
0–40 °C
Included items
CA-XLR2d-C (Canon Kit)
CA-XLR2d unit*
CA-AK1-C accessory shoe mount adapter (attached to unit)*
CA-AK1-AN cold shoe mount adapter*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable
CA-XLR2d-F (Fujifilm Kit)
CA-XLR2d unit*
CA-AK1-F accessory shoe mount adapter (attached to unit)*
CA-AK1-AN cold shoe mount adapter*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable
CA-XLR2d-AN (Analogue Kit)
CA-XLR2d unit*
CA-AK1-AN cold shoe mount adapter (attached to unit)*
Battery holder*
Mic holder (attached to unit)
Quick Guide (including warranty)
3.5-mm stereo mini jack cable

- Mic/Line inputs: 2 × XLR/TRS combo connectors (balanced, XLR with individually switchable 48 V phantom power)
- Additional mic input: 1 × 3.5-mm 3-pole mini-jack (supports 2.7 V plug-in power)
- Digital audio output: via accessory shoe (CA-XLR2d-C and CA-XLR2d-F only)
- Line/headphones output: 1 × stereo mini-jack
- Sampling rate, bit width: 48/96 kHz, 16/24 bit (according to camera setting)
- Mic preamp EIN (equivalent input noise): ≤–120 dBu (150 Ω, GAIN at max., A-weighted)
- Dynamic range: ≥95 dB (22-kHz LPF, A-weighted)
- Freq. response (XLR to digital input): 20 Hz to 20 kHz +0.5 dB / –1 dB (Fs = 48 kHz), 20 Hz to 40 kHz +0.5 dB / –1 dB (Fs = 96 kHz)
- Power supply: Power through accessory shoe of compatible camera, 2 AA batteries (alkaline, NiMH or lithium-ion)
- Power consumption: 2 W (max.)

- Mic/Line inputs: 2 × XLR/TRS combo connectors (balanced, XLR with individually switchable 48 V phantom power)
- Additional mic input: 1 × 3.5-mm 3-pole mini-jack (supports 2.7 V plug-in power)
- Digital audio output: via accessory shoe (CA-XLR2d-C and CA-XLR2d-F only)
- Line/headphones output: 1 × stereo mini-jack
- Sampling rate, bit width: 48/96 kHz, 16/24 bit (according to camera setting)
- Mic preamp EIN (equivalent input noise): ≤–120 dBu (150 Ω, GAIN at max., A-weighted)
- Dynamic range: ≥95 dB (22-kHz LPF, A-weighted)
- Freq. response (XLR to digital input): 20 Hz to 20 kHz +0.5 dB / –1 dB (Fs = 48 kHz), 20 Hz to 40 kHz +0.5 dB / –1 dB (Fs = 96 kHz)
- Power supply: Power through accessory shoe of compatible camera, 2 AA batteries (alkaline, NiMH or lithium-ion)
- Power consumption: 2 W (max.)

CASSETTE DECK:
- Cassette mechanism with IC logic transport control
- Dubbing function allows to record from CD
- ±10% pitch control
- Plays C-10 to C-90 cassettes
-- Playback: Type I (normal), Type II (high position), Type IV (metal)
-- Recording: Type I (normal), Type II (high position)
- Power-on recording/playback function
CD PLAYER:
- Plays CD-R and CD-RW in CD-DA and data formats (MP3)
- Shuffle playback, Program playback
- Various repeat modes (Single/All/Program)
- Playback modes when dubbing: Program/Shuffle/Repeat
- Anti-shock memory (2 seconds)
- Power-on playback function
USB MEMORY RECORDER/PLAYER:
- Recording to MP3 files from CD, cassette or line input
- MP3 playback (supports folders)
- Shuffle playback, Program playback
- Folder repeat playback
- Manual file division when recording from tapes or line input
- Automatic file division when recording from CD
- Power-on playback function

RECORDING FEATURES:
- Gapless continuous recording
- Independant L/R analogue input level controls
- Adjustable digital level
- Automatic (by level, by time, digital direct) or manual track division
- Fade in/out from 1 to 30 seconds in 1-second steps
- Rec mute function to record four seconds of silence
- Sync recording
- The number of tracks that can be recorded at once can be restricted
PLAYBACK FEATURES:
- Pitch control (±16% in 0.1 to 1.0% steps), Key control (±6 semi-tones), Key original function (change tempo without changing key)
- Auto Cue, Auto Ready
- Power-on playback (play when power comes on)
- Continuous, single, random, or program (up to 99 songs) playback
- All, single, or A-B repeat playback
OTHER FEATURES:
- Supported media: CD-R, CD-R-DA, CD-RW, CD-RW-DA
- Reliable slot-loading CD drive mechanism
- Erase/un-finalise CD-RWs
- Time display can be switched between elapsed and remaining time of a disc or track
- Plays MP3 files on data CDs (up to 8 folder levels)
- Shows MP3 tags on display
- Supports CD-Text
- Computer keyboard can be used for CD-Text input and as a remote control
- RCA unbalanced analogue I/O
- Coaxial and optical digital I/O (IEC 60958-3, SPDIF)
- Headphones output with level control (20 mW per channel)
- Sampling rate converter on coaxial and optical digital inputs
- Anti-shock memory (4 seconds)
- Wireless remote control included
- Infrared remote receiver can be deactivated
- 3-pole AC socket with detachable power cable
- 19-inch rack-mount chassis (2U)

- Form fit padded bag for Mixcast 4
- External pockets for power supply, cables, mics and more
- High quality fabric, zip pulls, and stitching
- Convenient shoulder strap for hands-free carry

Videographers love the Tascam DR-10L Pro portable recorder with clip-on microphone as an easy and unobtrusive solution for capturing audio for video. Combining the clip-on convenience of a lavalier microphone with an ultra-compact portable recorder, this form factor solves many of the problems content creators often face. It’s a superior solution for busy events such as weddings and on-location film shoots.

While traditional wireless microphone systems can pose workflow concerns, the rock-solid performance of a Tascam wired lavalier recorder is proven and assured. Simple plug-and-go operation also makes the DR-10L Pro an easy backup system for your typical voice recording setup.

The MA-BT240 is a versatile mixing amplifier designed for sound distribution, presentations and announcements in smaller commercial environments.
Combining amplification for both low- and high-impedance loudspeaker systems with a microphone input, two line-level inputs and a Bluetooth receiver for wireless audio streaming, it is an ideal choice for restaurants, retail stores, institutions, waiting rooms and similar locations.

Mixcast 4 makes professional content creation easy. For podcast creation, live streaming, event production or voice over, Mixcast 4 can mix and record mic input with internal background music, effect sounds and jingles via the trigger pads, and external audio input from your phone, PC or Bluetooth device.

Recorder specifications
Recording media
microSD card (64 MB – 2 GB)
microSDHC card (4–32 GB)
microSDXC card (48–512 GB)
Recording/playback formats
WAV (BWF): 44.1/48/96 kHz, 16/24 bit or 32 bit float
MP3: 44.1/48kHz, 128/192/256/320 kbit/s
Input channels
4 (maximum)
Recording tracks
6 (4 tracks + stereo mix)
Analogue audio inputs
Mic inputs 3–4 (balanced)
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
(phantom power over XLR only)
Input impedance
≥2.2 kΩ
Maximum input level
+2 dBu
Minimum input level
−75 dBu
Line inputs 3–4
XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
6.3-mm TRS jacks (Tip: HOT, Ring: COLD, Sleeve: GND)
Input impedance
≥9 kΩ
Maximum input level
+24 dBu
Minimum input level
−53 dBu
MIC/EXT IN (unbalanced)
3.5-mm mini jack (supports plug-in power)
Input impedance
10 kΩ (plug-in power off)
1.8 kΩ (plug-in power on)
Maximum input level
0 dBV
Minimum input level
−67 dBV
Analogue audio outputs
Line output (LINE OUT, unbalanced)
3.5-mm stereo mini jack
Output impedance
200 Ω
Nominal output level
−14 dBV
Maximum output level
+6 dBV
Headphones output
3.5-mm stereo mini jack
Maximum output
45 mW + 45 mW (THD+N: ≤0.1%, 32 Ω load)
Built-in speaker
0.4 W (mono)
Control inputs/outputs
USB port
USB Type-C connector
Format
USB 2.0 High Speed mass storage class
Bluetooth device connector
For Bluetooth adapter (AK-BT1) only
Audio performance
Equivalent input noise (EIN, mic inputs 3–4)
≤−125 dBu
Frequency response (inputs 3–4 to PCM data)
Fs 48 kHz: 20 Hz – 20 kHz, +0/−0.3 dB (JEITA)
Fs 96 kHz: 20 Hz – 40 kHz, +0/−0.7 dB (JEITA)
Dynamic range (20 kHz SPCL LPF, A-weighted, Field app)
Inputs 3–4 to PCM data
≥112 dB (48/96 kHz)
S/N ratio (20 kHz SPCL LPF, A-weighted)
Inputs 3–4
112 dB (48/96 kHz)
MIC/EXT IN
103 dB (48 kHz)
105 dB (96 kHz)
Total harmonic distortion ratio (THD+N, 1 kHz sine wave, –5 dBFS at input, GAIN at minimum, 20 kHz SPCL LPF)
Inputs 3–4 (LINE IN) to PCM data
0.008 %
Inputs 3–4 (MIC IN) to PCM data
0.006 %
Note: JEITA indicates conformance to JEITA CP-2150
Power supply and other specifications
Power supply
4 AA batteries (alkaline, Ni-MH or lithium-ion)
USB bus power from a computer
AC adapter (TASCAM PS-P520U, sold separately)
Power consumption
7.5 W (maximum)
Display
2.4-inch full-colour LCD touchscreen
Dimensions (W × H × D)
75 mm × 174 mm × 37 mm (excluding protrusions)
Weight
365 g (with batteries)
265 g (without batteries)
Operating temperature range
0–40 °C
Approximate battery operation time (continuous operation in hours:minutes)
Using alkaline batteries (Evolta)
Included mics, phantom power off, stereo WAV recording at 44.1 kHz / 24-bit
13:30
Included mics plus inputs 3-4, phantom power on, stereo WAV recording at 44.1 kHz / 24-bit
5:30
Using NiMH batteries (eneloop)
Included mics, phantom power off, stereo WAV recording at 44.1 kHz / 24-bit
11:00
Included mics plus inputs 3-4, phantom power on, stereo WAV recording at 44.1 kHz / 24-bit
5:30
Using lithium-ion batteries (Energizer Ultimate Lithium)
Included mics, phantom power off, stereo WAV recording at 44.1 kHz / 24-bit
22:00
Included mics plus inputs 3-4, phantom power on, stereo WAV recording at 44.1 kHz / 24-bit
11:30

TH-11 are closed-back, stylish headphones that deliver a sound you have to hear to believe, and at a price you can’t ignore. Tascam spent over a year comparing technologies, designs and methods to provide you with an amazing product for less than a third of the usual cost.

The sensitivity and frequency response of the TH-11 lead to a clear balanced sound to fit all of your favorite tunes, regardless of genre or application. These high-powered headphones produce pristine highs, clear mid-range, and rich low end.

However, just as important as the sound of headphones is a clean modern design and comfort. Featuring plush cushioned ear cuffs and a padded headband, TH-11 can be put to work for hours of comfortable use. Both left and right ear cuffs offer full 90° rotation making TH-11 flexible to wear when listening to your favorite albums, tracking for hours or performing all night. Not to mention, you’re going to look good wearing them. And the folding design allows the TH-11 to compactly fit wherever they need to go.

The TH-11 headphones can easily be a part of your everyday accessories but also fit into your recording or performing workflow. Truly listen to the details of your music and media while enjoying comfort and flexibility.

- Model: Condenser
- Polar pattern: Cardioid
- Frequency Response: 20Hz - 20,000Hz
- Output impedance: 200Ω +/-30% (at 1kHz)
- Load impedance: >1kΩ
- Sensitivity: -38dB +/-2dB (0dB=1V/Pa at 1kHz)
- Self noise: 17dB A
- Max. SPL: 136dB (at 1kHz=1% THD)
- S/N ratio: 77dB
- Housing: Die cast zinc
- Dimensions: 48(W) × 165 (H) × 48 (D) mm
- Weight: 300g
- Accessories: SHOCK MOUNT, MINI DESK STAND, MIC CABLE, Owner’s manual (The warranty is included at the end of this manual)

Windscreen for Portacapture and DR series recorders