The two-directional Portable Radio Frequency Transceiver is a transmitter and receiver in one, allowing users to both speak and listen across 40 channels. It is splash-resistant and comes with a micro-USB power supply to make charging the unit simple and fast. Up to 99 transceivers can be used per group, with one being defined the primary transmitter capable of both speech and listening.

Hearing loop cable, table wire Flat Copper Tape - 25 mm width (2.5mm²) - 100m

Hearing loop cable, table wire 50 mm yellow Gaffa tape

RMM1 is an accessory for the HLD7 and HLD9 large area hearing loop drivers. It can adjust both drive level and loop output levels via an embedded web service. This can be done from a desktop or mobile device without the need to return to the driver(s), reducing installation time.

The combined speaker and directional microphone module for the customer side.

The low-space, combined speaker and directional microphone module for the customer side.

The low-space, combined speaker and directional microphone module for the customer side.

This speech transfer system features a combined speaker and microphone module in a bridge bar style.
-Speech Transfer Amplifier [STS-A31H]
-Bridge Bar Customer Unit [STS-B80-G/B]
-Staff Loudspeaker Unit [STS-SU1-G/B]
-PS-55 Power Supply [PS-55-01]
-Counter Hearing Loop Aerial [IL-AE99]
-BS EN 60118-4 in correct installations
-CE, ROHS and WEEE compliant

This speech transfer system features individual speaker and microphone units for the customer-side
-Speech Transfer Amplifier [STS-A31H]
-Surface Mounted Speaker and Microphone [STS-S60-G/B] [STS-M54-G/B]
-Staff Loudspeaker Unit [STS-SU1-G/B]
-PS-55 Power Supply [PS-55-01]
-Counter Hearing Loop Aerial [IL-AE99]
-BS EN 60118-4 in correct installations
-CE, ROHS and WEEE compliant

This speech transfer system provides high quality sound across partitions and safety screens. It includes our surface mounted entry unit, our open duplex amplifier, a hearing loop, and a free-standing microphone and speaker unit for staff.The surface mounted entry is for customer use and is installed at head height.

-Speech Transfer Amplifier [STS-A31H]
-Slimline Bridge Bar Unit in Stainless Steel [STS-B90-SS]
-Staff Loudspeaker Unit in Brushed Stainless Steel [STS-SU1-SS]
-PS-55 Power Supply [PS-55-01]
-Counter Hearing Loop Aerial [IL-AE99]

Anti-Vandal Microphone With 200 mm stem

This plastic mouse microphone forms part of a number of induction loop systems and is installed on the staff side of the counter/desk. Termination is via a single cable with a green connector ready for a push connection onto the STS-A30, Il-A10, IL-A11 or the STS-A31 amplifier.

- Frequency Response (± 3 dB): 70 Hz - 14 kHz
- Dimensions: 40 x 70 x 100 mm (W x H x D)
- Weight: 0.65 kg (Plastic), 0.80 kg (Metal)
- Construction: ABS

Discreet microphone Discreet Microphone

Discreet microphone With round base

Discreet microphone With right angled bracket, black

A set of two overhead sealed speaker modules to be fitted above both the staff and customer side counters.

The free-standing speaker modules for the customer side.

This flush speaker forms part of a Securicom Surface mounted through the glass communication system and is installed on the customer side of the glass. Termination is via a single cable with a green connector ready for a push connection onto the STS-A30 amplifier.

STS-SU1 staff unit is a combined speaker and microphone module which forms part of a SecuriCom through the glass communication system and is installed on the staff side of the glass. The unit comprises of a single 4 ohm speaker and a semi rigid goose neck microphone and fitted with a mute switch to isolate the customer microphone input.

STS-SU1 staff unit is a combined speaker and microphone module which forms part of a SecuriCom through the glass communication system and is installed on the staff side of the glass. The unit comprises of a single 4 ohm speaker and a semi rigid goose neck microphone and fitted with a mute switch to isolate the customer microphone input.

Easily switches between the following frequencies:
- 100Hz
- 500Hz
- 1KHz
- 2.5KHz
- 5KHz
- Pink noise
- White noise
- 1 hour auto power off

Our highly efficient and compact V7 is a constant current, perimeter hearing loop driver, suitable for smaller facilities and venues. It has a Class-D amplifier output stage and an audio subsystem built around an advanced DSP core.