The brackets are used to mount the Contacta loop drivers to a 19"' rack and would be suitable for mounting with existing equipment.

The brackets are used to mount the Contacta loop drivers to a 19"' rack and would be suitable for mounting with existing equipment.

- B7 Hearing loop Driver
- Travel case
- transmitter and receiver aerials
- Handheld microphone
- Multi-Frequency beltpack microphone
- loop Listener
- boundary microphone

For use with the Contacta speech transfer amplifiers, 1 to 1 Hearing Loop Driver and Home Hearing Loop Driver. Compatible with either UK, EU or US/Japan IEC lead. Complies with relevant European and North American EMC and safety standards.

Belt Clip for RF Transmitter/Receiver.

This charger case is for use with our Portable RF Transmitter and Portable RF Receiver and can hold up to 20 receivers in a standing position. The case is provided with a power supply.

Our Radio Frequency Repeater provides up to 300 metres in signal distance between a radio frequency systems’ transmitter and its portable receivers, working on internationally compatible frequencies. Contacta RF systems support 40 selectable channel groups to allow for a wide array of applications such as multi-language interpretation and tour guidance.

This 2 Bay Charging Station is for use with our Portable Radio Frequency Transmitter and Portable Radio FrequencyReceiver to hold 2 units in a standing position.

This 10 Bay Charger Case is for use with our Portable RF Receiver and can hold up to 10 receivers in a standing position. The case is provided with a power supply.

A headset for use with the Portable RF Transceiver has a 1.2 meter cable and 3.5mm colour-coded jack.

This 10 Bay Charger Case is for use with our Portable RF Transceivers and can hold up to 10 transceivers in a standing position. The case is provided with a power supply.

The lightweight Portable Radio Frequency Transmitter gives on-the-move transmission of clear speech to our to portable receivers and transceiver across 40 channels. It is provided with a belt-clip to allow users to unobtrusively wear the unit when needed, and uses a micro-USB power supply to make charging the unit simple and fast.

The earworn microphone for our Portable RF Transmitter has a 1.2 metre cable and 3.5mm colour-coded jack. It enables handsfree communication with clear sound.

The microphone for use with the Portable RF Transmitter provides clear sound.

Our Radio Frequency Remote Antenna Kit is for use with the Radio Frequency Rack Transmitter [RF-TXRM] when the latter is installed in a rack. It enables the antenna from the rear of the transmitter to be fixed at the front of the unit in open air, extending the system’s outgoing signal.

The Radio Frequency Rack Transmitter is a version of our standard 2.4GHz RF transmitter intended for rack mounting. It uses internationally compatible frequencies to transfer crystal clear sound to the portable receivers. The system supports 40 selectable channel groups to allow for a wide array of applications such as multi-language interpretation, and has a signal range of up to 300 metres.

The state-of-the-art 2.4GHz Radio Frequency Transmitter transfers crystal clear sound to our portable receivers, working on internationally compatible frequencies. The system supports 40 selectable channel groups to allow for a wide array of applications such as multi-language interpretation, and provides a signal range of up to 300 metres.

- HLD3 Hearing Loop Driver (HLD3)
- Hearing Loop Pad with Built in-Aerial
- Small Boundary Microphone (IL-PL21)
- PS-55 Power Supply (PS-55-01)
- 3.5mm Auxilliary Cable, length of 2.5m
- Optical Cable, length of 1.5m

Hearing loop cable, table wire Flat Copper Tape - 10 mm width (0.5mm²) - 100m

Hearing loop cable, table wire Flat Copper Tape - 12.5 mm width (1.25mm²) - 100m

Hearing loop cable, table wire 50 mm blue Gaffa tape

Hearing loop cable, table wire 50 mm red Gaffa tape

A free standing directional microphone with a round base for the staff side with a rigid stem.

- Supply voltage: 12-14 VDC
- Quiescent current: 100mA typical
- Operating current: 2A typical on speech peaks
- Power switch: Push on - push off (tact switch under membrane)
- Microphones: Electret, supply 5V via 2.2K load resistor
- Speaker Output power: RMS: 2.5W / 8 4.4W / 4
- Loop drive compliance: Constant current, bounded by 4V RMS & 2A RMS
- Total harmonic distortion: <5%

The recessed bridge bar unit with a screen mounted directional microphone for the customer side.

The combined speaker and directional microphone module for the customer side.

The robust and sleek bridge bar unit in brushed stainless steel combines speaker and screen mounted directional microphone for installation on the customer side.

The low-space, combined speaker and directional microphone module for the customer side.

The low-space, combined speaker and directional microphone module for the customer side.

This speech transfer system features a combined speaker and microphone module in a bridge bar style.
-Speech Transfer Amplifier [STS-A31H]
-Bridge Bar Customer Unit [STS-B80-G/B]
-Staff Loudspeaker Unit [STS-SU1-G/B]
-PS-55 Power Supply [PS-55-01]
-Counter Hearing Loop Aerial [IL-AE99]
-BS EN 60118-4 in correct installations
-CE, ROHS and WEEE compliant