(30) 2X RCA/CINCH - 2X TERMINAL BLOCK (3P-3.81MM) - 1M

Connection plate with a standard D-size hole, designed to fit any type or brand of D-size connector. Compatible with AUDAC, Niko or other 45 x 45 installation materials. (mounting frame and cover plate not included)

Integrated Bluetooth receiver
4-channel Dante™/AES67
Internal mixing & DSP processing
2 x XLR inputs

Front USB type-C port
Integrated Bluetooth receiver
4-channel Dante™/AES67
Internal mixing & DSP processing

(5) SURFACE MOUNT BOX FOR AUDAC WALLPANEL - WHITE

(2) FULL RANGE LOUDSPEAKER CABINET- 2WAY - 8" - 120W - WHITE

-Speaker type: 2-way coaxial
-Max. Power: 120 W
-RMS Power: 60 W
-Impedance: 16 Ohms
-Connectors: 4-pin Euro Terminal Block
-Sensitivity (1W/1m): 83 dB

DIGITAL PAGING MICROPHONE 8 ZONES

RJ 45 3-WAY JUNCTION FORAPM-SERIES POWER CONNECTION

Peak power handling 40 W
Program power handling 20 W
Speaker type Full range
RMS/AES power handling 10 W
Impedance 8 Ω
Incline angle Left 25°
Right 25°
Bottom 25°
Top 15°
Sensitivity (1W/1m) 83 dB
Sound Pressure (Max. W/1m) 93 dB
Frequency Response (± 3 dB) 120 Hz - 20 kHz
Range (-10 dB) 100 Hz - 20 kHz
Dispersion Horizontal 145°
Vertical 170°
Ingress Protection rating IP40
Connectors 2-pin Euro Terminal Block
Drivers 2” Aluminium full range

The ATEO is a series of extraordinary loudspeakers especially designed for fixed install indoor applications, ranging from modern residential applications to the most demanding designer applications in environments such as retail stores, pubs, restaurants or even clubs.\nThe ATEO4 is the 4? version with a 1? dome tweeter and a 4? Mid /Low-frequency driver, ensuring a true to- nature, high-fidelity.
Gepatenteerd CleverMount™-montagesysteem.
Ultravlakke frequentierespons.
Multi-tap 70V / 100V lijntransformator.

The CF45 cover frames allow flush mount installation for any 45 x 45 mm standard sized product such as matrix control panels, volume controllers, connection plates, ... They come including a metal subframe(s) and are available in single (CF45S) and double (CF45D & CF45DH) unit size.  The CF45D
is equipped with mounting points for screw mounting. They are a

(26) SINGLE COVER FRAME FOR 45X45MM WALL PANEL - SCREWS - RAL9004

The CP45HDM is a 45 x 45 mm HDMI Connection plate, available in black or white. Each CP45HDM ships with a matching PROCAB BSP602, a female - female HDMI Pigtail. The 45 x 45 mm size is compatible with AUDAC, Niko, Legrand and other standard 45 x 45 mm Mounting frames and cover plates.

Connection plate with Neutrik Speakon connector, designed to be used with electrical flush mounting boxes that exceeds 47 mm depth. The existing range of CP45 solderless panels are not compatible with WB45 surface mount boxes. Available in Black (/B) & White (/W). (Mounting frame and cover plate not included)

WALL PANEL CONTROLLER 8 ZONESFOR 45X45 STANDARD - BLACK

WALL PANEL CONTROLLER 8 ZONESFOR 45X45 STANDARD - WHITE

- 4 x 100W RMS @ 4 OHM Stereo
- 4 x 50W RMS @ 8 OHM Stereo
- 2 x 200W RMS @ 8 OHM Bridge
- Signal to noise ratio > 90 dB
- Class-D
- 4,5 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: 2-pin Euro Terminal Block (Pitch - 5.08 mm)

-MP3, WMA, WAVE, FLAC, OGG
-15 trigger contact inputs
-Pulse / contact & event triggering
-Priority / repeat selectable
-USB drive playback

The GLI series are optionally available front grills with TwistFix? technology for the CALI loudspeaker series. The GLI grills fit the CALI6 speakers and are available in 3 versions: black (/B), white (/W) and paintable (/P).\nThe TwistFix? system assembles the speakers? grill through twisting. A bayonet-type locking with lips on the grill side gets fixed through insertion to slots on the speakers

The HS121 is a full range sound projector based on a 4" driver especially designed to provide quality sound with a long throw range in a wide variation of in- and outdoor applications. Its wide, smooth frequency response and high efficiency ensure high-fidelity music reproduction along with superb projection of clear and intelligible speech at very low distortion. It delivers a power of 20 Watt RMS in standard 8 Ohm systems with a maximum power of 40 Watt but it can also be used in 100V PA systems. The 100V line transformer has power taps for 20 Watt, 10 Watt and 5 Watt which can be selected by the special designed 5-pin waterproof connector. This connector allows selecting the desired power tapping depending on the angle of rotation of the connector. The housing is made of the strongest ABS material in a light-grey colour, ensuring a smooth blend of the loudspeaker in all different kinds of environments. The IP rating of IP65 makes it suitable for indoor as well as outdoor use. For safety reasons, the speaker is provided with an internal steel safety cable, which prevents the speaker from falling, even in situations where the housing of the speaker has been damaged or broken.

- IP65 Ingress protection
- 12" high output woofer with a 1.8" voice coil
- Multi-Layer glass composite material with textured EPDM black coating
- Barrier terminal block in waterproof connection box

- Linum Technology
- vTuner database sync (30.000+ Channels)
- MP3, WMA, radio station support
- Custom audio stream selection
- Preferences list up to 100 entries

The AUDAC M67 is a multipurpose dynamic hand microphone. The high sensitive neodymium element makes the M67 a perfect microphone for presentations and singing. Due to the unidirectional (cardioid) polar pattern, the M67’s feedback is reduced to a strict minimum.

The MBK410C is a mounting bracket system for fixation of NOBA8(A) speakers on any ceiling. It allows central positioning for directional placement to guarantee the optimal sound coverage throughout the area. \n It is composed of a ceiling section and speaker section which can be hooked with each other. This guarantees great installers convenience for fixing the ceiling section on the desired loca

- 4 x 240W output power @ 100V
- Lightweight Class-D amplifier
- Advanced DSP & loudspeaker management
- Intuitive graphical interface on 2.5" LCD display
- Pre-loadable loudspeaker & set configurations
- Unmatched technology and affordability
- Flexible input and output configuration
- XLR & terminal block source compatibility
- RS-232 control and Dante expansion port

(4) POWER SUPPLY 24V DC 1.67 AMP.40W

The WB45S wall boxes allow surface and flush mount installation for any 45 x 45 mm standard sized product such as matrix control panels, volume controllers, connection plates, ...
The WB45S/W and WB45S/B come including a metal subframe. They are available in black (/B) and white (/W). The WB45S/FS is a flush mount box for stone or concrete w