2 x XLR inputs
Integrated Bluetooth receiver
3.5 mm jack
4-channel Dante™/AES67
Internal mixing & DSP processing

Front USB type-C port
Integrated Bluetooth receiver
4-channel Dante™/AES67
Internal mixing & DSP processing

(5) SURFACE MOUNT BOX FOR AUDAC WALLPANEL - WHITE

-Frequency: 2.4 kHz
-Type: Passive built-in
-Speaker type: 2-way
-Max. Power: 140 W
-RMS Power: 70 W
-Impedance: 16 Ohms/ 100V
-Line Transformer Tappings: 1: 60 W/ 167 Ohms; 2: 30 W/ 333 Ohms; 3: 15 W/ 667 Ohms
-Sensitivity (1W/1m): 89 dB
-Response (± 3 dB): 60 Hz - 17 kHz
-Range (-10 dB): 50 Hz - 20 kHz

(2) FULL RANGE LOUDSPEAKER CABINET- 2WAY - 8" - 120W - WHITE

-Speaker type: 2-way coaxial
-Max. Power: 120 W
-RMS Power: 60 W
-Impedance: 16 Ohms
-Connectors: 4-pin Euro Terminal Block
-Sensitivity (1W/1m): 83 dB

DIGITAL PAGING MICROPHONE 8 ZONES

RJ 45 3-WAY JUNCTION FORAPM-SERIES POWER CONNECTION

(10) WALL SPEAKER WITH CLEVERMOUNT 2" - 10W / 8 OHM - BLACK

The ATEO is a series of extraordinary loudspeakers especially designed for fixed install indoor applications, ranging from modern residential applications to the most demanding designer applications in environments such as retail stores, pubs, restaurants or even clubs.\nThe ATEO4 is the 4? version with a 1? dome tweeter and a 4? Mid /Low-frequency driver, ensuring a true to- nature, high-fidelity.
Gepatenteerd CleverMount™-montagesysteem.
Ultravlakke frequentierespons.
Multi-tap 70V / 100V lijntransformator.

QUAD CHANNEL 100V POWER AMPLIFIER - 4 X 120W

The CF45 cover frames allow flush mount installation for any 45 x 45 mm standard sized product such as matrix control panels, volume controllers, connection plates, ... They come including a metal subframe(s) and are available in single (CF45S) and double (CF45D & CF45DH) unit size.  The CF45D
is equipped with mounting points for screw mounting. They are a

(26) SINGLE COVER FRAME FOR 45X45MM WALL PANEL - SCREWS - RAL9004

WALL PANEL CONTROLLER 8 ZONESFOR 45X45 STANDARD - BLACK

WALL PANEL CONTROLLER 8 ZONESFOR 45X45 STANDARD - WHITE

- 4 x 100W RMS @ 4 OHM Stereo
- 4 x 50W RMS @ 8 OHM Stereo
- 2 x 200W RMS @ 8 OHM Bridge
- Signal to noise ratio > 90 dB
- Class-D
- 4,5 Kg
- DC Short-circuit
- Over heating
- Over load
- Signal limiting
- 482 x 44 x 330 mm
- Input: XLR input & signal linkthrough
-Output: 2-pin Euro Terminal Block (Pitch - 5.08 mm)

-MP3, WMA, WAVE, FLAC, OGG
-15 trigger contact inputs
-Pulse / contact & event triggering
-Priority / repeat selectable
-USB drive playback

The GLI series are optionally available front grills with TwistFix? technology for the CALI loudspeaker series. The GLI grills fit the CALI6 speakers and are available in 3 versions: black (/B), white (/W) and paintable (/P).\nThe TwistFix? system assembles the speakers? grill through twisting. A bayonet-type locking with lips on the grill side gets fixed through insertion to slots on the speakers

The HS121 is a full range sound projector based on a 4" driver especially designed to provide quality sound with a long throw range in a wide variation of in- and outdoor applications. Its wide, smooth frequency response and high efficiency ensure high-fidelity music reproduction along with superb projection of clear and intelligible speech at very low distortion. It delivers a power of 20 Watt RMS in standard 8 Ohm systems with a maximum power of 40 Watt but it can also be used in 100V PA systems. The 100V line transformer has power taps for 20 Watt, 10 Watt and 5 Watt which can be selected by the special designed 5-pin waterproof connector. This connector allows selecting the desired power tapping depending on the angle of rotation of the connector. The housing is made of the strongest ABS material in a light-grey colour, ensuring a smooth blend of the loudspeaker in all different kinds of environments. The IP rating of IP65 makes it suitable for indoor as well as outdoor use. For safety reasons, the speaker is provided with an internal steel safety cable, which prevents the speaker from falling, even in situations where the housing of the speaker has been damaged or broken.

- IP65 Ingress protection
- 12" high output woofer with a 1.8" voice coil
- Multi-Layer glass composite material with textured EPDM black coating
- Barrier terminal block in waterproof connection box

The AUDAC M67 is a multipurpose dynamic hand microphone. The high sensitive neodymium element makes the M67 a perfect microphone for presentations and singing. Due to the unidirectional (cardioid) polar pattern, the M67’s feedback is reduced to a strict minimum.

The MBK410C is a mounting bracket system for fixation of NOBA8(A) speakers on any ceiling. It allows central positioning for directional placement to guarantee the optimal sound coverage throughout the area. \n It is composed of a ceiling section and speaker section which can be hooked with each other. This guarantees great installers convenience for fixing the ceiling section on the desired loca

designed to safely and effectively mount half rackspace devices into 19" or 10.5" racks
Set contains:
- 1 x single mounting ear
- 2 x double mounting ears
- 2 x couplers
- 8 x screws M4 x 6mm

The WB45S wall boxes allow surface and flush mount installation for any 45 x 45 mm standard sized product such as matrix control panels, volume controllers, connection plates, ...
The WB45S/W and WB45S/B come including a metal subframe. They are available in black (/B) and white (/W). The WB45S/FS is a flush mount box for stone or concrete w

The WMA series incline bracket is specially designed for the ATEO speaker series. These brackets add an extra 30° angle to the already existing incline angle of ATEO speakers. This bracket opens the possibility to place the speaker horizontally or vertically in an angle up to 60° and ensures a perfect sound experience.

-Waterproof AWX-5 connector
-Frequency: 2.5 kHz
-Type: Passive built-in
-HF: 1"
-LF: 3"
-Range (-10 dB): 60 Hz - 20 kHz
-Response (± 3 dB): 90 Hz - 18 kHz
-Impedance: 8 Ohms/ 100V
-Line Transformer Tappings: 1: 20 W/ 500 Ohms; 2: 10 W/ 1000 Ohms; 3: 5 W/ 2000 Ohms
-IP55
-Max. Power: 60 W
-Sensitivity (1W/1m): 85 dB

Full range speaker
Peak power handling: 240 W
Program power handling: 120 W
RMS/AES power handling: 60 W
Impedance: 8 Ω
Weatherproof - IP66 rating
Marine grade build quality & UV resistant
CleverMount™+ bracket
External power tap selection
Screwless WAGO connections with linktrough up to 4mm²
No wires or bracket visible from the back

Full range speaker
Peak power handling: 240 W
Program power handling: 120 W
RMS/AES power handling: 60 W
Impedance: 8 Ω
Weatherproof - IP66 rating
Marine grade build quality & UV resistant
CleverMount™+ bracket
External power tap selection
Screwless WAGO connections with linktrough up to 4mm²
No wires or bracket visible from the back