Adjustable Distance Tube 35mm M20

Adjustable Distance Tube (0.82 - 1.4 m)

Adjustable Distance Tube with Locking Adapter (0,8 - 1,2 m)

Product Type: Active Two-Way Speaker/Monitor
Frequency Response (-6dB): 58Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Amplifier Technology: 2 channel switched mode class AB with DSP
LF Section Power: RMS: 400W / Program: 540W / Peak: 1080W
HF Section Power: RMS: 100W / Program: 135W / Peak: 270W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 122dB / 128dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm) / 2.5" (65mm) voice coil, custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Power Input: 90V - 245V
Mains Connector: Signal: 2 x XLR ; Power: 2 x powerCON
Power Consumption: 550W
Dimensions (WxHxD): 356 x 554 x 410 mm
Net Weight: 20.6kg
Shipping Weight: 22.8kg

Product Type: Passive Two-Way Speaker/Monitor
Frequency Response (-6dB): 58Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Program Power: 500W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 96dB (Full-Space)
Maximum SPL (calculated): 123dB / 129dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm) / 2.5" (65mm) voice coil, custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x Neutrik NL4
Recommended Amplifier: MA2300 / MA1700
Dimensions (WxHxD): 356 x 554 x 410 mm
Net Weight: 19.6kg
Shipping Weight: 21.5kg

TECHNICAL SPECIFICATIONS
Product Type: Passive Two-Way Speaker/Monitor
Frequency Response (-6dB): 54Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Program Power: 600W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 99dB (Full-Space)
Maximum SPL (calculated): 126dB / 132dB (Full-Space)
Low Frequency Driver: 1 x 15" (380mm) / 3" (76mm) voice coil, custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x Neutrik NL4
Recommended Amplifier: MA2300 / MA1700
Dimensions (WxHxD): 431 x 654 x 440 mm
Net Weight: 24.5kg
Shipping Weight: 27.1kg

TECHNICAL SPECIFICATIONS
Product Type: Active Two-way Speaker
Frequency Response (-6dB): 60Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Amplifier Technology: 2 Channel Switched Mode Class AB with DSP
LF Section Power
RMS: 400W / Program: 540W / Peak: 1080W
HF Section Power
RMS: 100W / Program: 135W / Peak: 270W
DSP Technology
Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Polarity, Bass Enhancer, Level, Mute
DSP Presets: 6 Factory and 2 User, Selectable via Software or Rear Panel Switch
Control Type: Via RS485 and Suplied Software "SOUNDWARE"
Maximum SPL (calculated): 118dB / 124dB (Full-Space)
Low Frequency Driver: 1 x 8" (210mm) / 2" (50.5mm) VC, custom speakers
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x XLR; Power: 2 x powerCON
Power Input: 90V - 245VAC
Power Consumption: 550W
Dimensions (WxHxD): 254 x 415 x 301 mm
Net Weight: 11.8kg

TECHNICAL SPECIFICATIONS
Product Type: Passive Two-way Speaker
Frequency Response (-6dB): 60Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Program Power: 300W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 93.5dB (Full-Space)
Maximum SPL (calculated): 118dB/124dB (Full-Space)
Low Frequency Driver: 1 x 8" (210mm) / 2" (50.5mm) VC, custom speakers
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x Neutrik NL4
Recommended Amplifier: MA1700 / MA900
Dimensions (WxHxD): 254 x 415 x 301 mm
Net Weight: 10.2kg

TECHNICAL SPECIFICATIONS
Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 150W
Amplifier Power - Stereo 4Ω: 4 x 150W
Amplifier Power - Stereo 2Ω: 4 x 150W
Amplifier Power - 100V: 4 x 125W
Amplifier Power - 70V: 4 x 125W
SNR (Signal to Noise Ratio): >102dB (20Hz - 20kHz, A weighted)
Crosstalk: -60dB @ 1kHz
Input Impedance: 10kΩ to ground / 20kΩ balanced
Latency: 2.5ms
Audio Signal Inputs: Analog, GPIO
Input Connectors: 4 x Analog Sig.
Audio Signal Outputs: None
Speakers Output Connectors: 4 (Euro 5mm)
Power Supply: Universal, regulated switch mode with PFC
Power Input: 90V - 264V
Mains Connector
IEC 10A
Special Features
Filters: Parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop | Limiters: RMS voltage, Peak
Dimensions (WxHxD): 210mm x 40mm x 275mm
Net Weight: 2.6kg

Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Latency: 2.5ms
Power Supply: Universal, regulated switch mode with PFC
Power Input: 90V - 264V
Mains Connector: IEC 10A
Dimensions (WxHxD): 210mm x 40mm x 275mm
Net Weight: 2.6kg

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel High-Performance Amplifier
Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 1250W
Amplifier Power - Stereo 4Ω: 4 x 1500W
Amplifier Power - Stereo 2Ω: 4 x 1500W
Amplifier Power - Bridge 8Ω: 2 x 3000W
Amplifier Power - Bridge 4Ω: 2 x 3000W
THD+N: < 0.1% (typically < 0.05%)
IMD: < 0.1% (typically < 0.05%)
Input Impedance: 20kΩ balanced
Delay Adjustment: up to 2s on input section; up to 100ms per output for time alignment
Power Supply: Universal regulated switch mode with PFC, SRM
Power Input: 90-264 VAC @ 50/60 Hz
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 484mm x 44.5mm x 405mm

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 1600W
Amplifier Power - Stereo 4Ω: 4 x 3000W
Amplifier Power - Stereo 2Ω: 4 x 5200W
Amplifier Power - Bridge 8Ω: 2 x 6000W
Amplifier Power - Bridge 4Ω: 2 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20 Hz - 20 kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform: Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply
Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 44mm x 495mm

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 1600W
Amplifier Power - Stereo 4Ω: 4 x 3000W
Amplifier Power - Stereo 2Ω: 4 x 5200W
Amplifier Power - Bridge 8Ω: 2 x 6000W
Amplifier Power - Bridge 4Ω: 2 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20 Hz - 20 kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology
ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment: up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply
Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 44mm x 495mm

TECHNICAL SPECIFICATIONS
Product Type: 8-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 8
Amplifier Power - Stereo 8Ω: 8 x 1600W
Amplifier Power - Stereo 4Ω: 8 x 3000W
Amplifier Power - Stereo 2Ω: 8 x 5200W
Amplifier Power - Bridge 8Ω: 4 x 6000W
Amplifier Power - Bridge 4Ω: 4 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform: Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply: Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 88mm x 495mm

TTECHNICAL SPECIFICATIONS
Product Type: 8-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 8
Amplifier Power - Stereo 8Ω: 8 x 1600W
Amplifier Power - Stereo 4Ω: 8 x 3000W
Amplifier Power - Stereo 2Ω: 8 x 5200W
Amplifier Power - Bridge 8Ω: 4 x 6000W
Amplifier Power - Bridge 4Ω: 4 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply
Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 88mm x 495mm

TECHNICAL SPECIFICATIONS
Product Type: Coaxial Horn-Loaded Mid/High Speaker
Frequency Response (-6dB): 136Hz - 18.000Hz
Low Frequency Extension (-10dB): 130Hz
Nominal Coverage (-6dB): 90º x 50º Rotatable
MF Nominal Impedance: 8Ω
HF Nominal Impedance: 16Ω
MF Sensitivity (1W, 1m): 103dB (Full-Space)
HF Sensitivity (1W, 1m): 110dB (Full-Space)
Maximum SPL (calculated): 132dB / 138dB (Full-Space)
MF Maximum SPL (calculated): 132dB / 138dB (Full-Space)
HF Maximum SPL (calculated): 132dB / 138dB (Full-Space)
Medium Frequency Driver: 1 x 12" (300mm) / 3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 1 x 1.4" (36mm) exit / 2.5" (65mm) VC, B&C custom compression driver
Medium Frequency Driver Power
Program: 800W / Peak: 1600W
High Frequency Driver Power: Program: 160W / Peak: 320W
Input Connectors: 2 x Neutrik NL8 parallel wired
Recommended Amplifier: PXA8001 (Dedicated power rack)
Fittings: 16 x M8 threaded inserts for optional wheel kit, 48 x M8 threaded inserts for optional rigging/tilting systems
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: 15mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 616 x 612 x 641mm
Net Weight: 43.3kg

TECHNICAL SPECIFICATIONS
Product Type: Hybrid Horn-Loaded Bass Speaker
Frequency Response (-6dB): 42Hz - 180Hz
Low Frequency Extension (-10dB): 34Hz
Program Power: 2400W
Peak Power: 4800W (10ms)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 104dB (Half-Space)
Maximum SPL (calculated): 137.8dB / 143.8dB (Half-Space)
Subwoofer Driver: 1 x 18" (460mm) / 4" (100mm) VC, high excursion, B&C custom speaker
Input Connectors: 2 x Neutrik NL8 parallel wired
Recommended Amplifier: PXA8001 (Dedicated power rack)
Fittings: 16 x M8 threaded inserts for optional wheel kit, 12 x M8 threaded inserts for optional rigging system
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: Braced 15mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 600 x 766 x 641 mm
Net Weight: 49.5kg

NEXT Bag for 2 x K5 / 2 x K5+

NEXT Bag for 2 x M8

NEXT Cover for 2 x LAs15/A to use with Dolly

NEXT Individual Bag for HFA206 / HFA206p

NEXT Individual Cover for HFA108

NEXT Individual Cover for HFA112

NEXT Individual Cover for HFA112s

NEXT Individual Cover for HFA115

NEXT Individual Cover for HFA118sHP

NEXT Individual Cover for PFA8 / PFA8p

NEXT Individual Cover for PFA12 / PFA12p

NEXT Individual Cover for PFA15 / PFA15p