K10s Passive Front-Loaded Subwoofer
Custom 1x10"
500W, 8Ω, 129dB Peak

TECHNICAL SPECIFICATIONS
Product Type: Active 2-Way Line Array Element
Frequency Response (-6dB): 58Hz - 19.000Hz
Nominal Coverage (-6dB): 90º x 8º or 120º x 8º with optional accessory
Amplifier Technology: 2 channel switched mode class D with DSP
LF Section Power: RMS: 1100W / Program: 1480W / Peak: 2960W
HF Section Power: RMS: 550W / Program: 740W / Peak: 1480W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 129dB / 135dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm) / 3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 2 x 1.4" (36mm) exit / 2.5" (65mm) VC, B&C custom compression driver
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON
Power Input: 180V - 245VAC
Power Consumption: 770W
Dimensions (WxHxD): 602 x 350 x 465 mm
Net Weight: 36kg

TECHNICAL SPECIFICATIONS
Product Type: Passive 2-Way Line Array Element
Frequency Response (-6dB): 58Hz - 19.000Hz
Low Frequency Extension (-10dB): 48Hz
Nominal Coverage (-6dB): 90º x 8º
LF Nominal Impedance: 8Ω
HF Nominal Impedance: 16Ω
Frequency / Type of X-Over: 1150Hz Linkwitz-Riley 48dB/oct
Recommended High-Pass Filter: 45Hz, 18dB/oct Butterworth
LF Sensitivity (1W, 1m): 100dB (Full-Space)
HF Sensitivity (1W, 1m): 108dB (Full-Space)
Maximum SPL (calculated): 129dB / 135dB (Full-Space)
LF Maximum SPL (calculated): 129dB / 135dB (Full-Space)
HF Maximum SPL (calculated): 133dB / 139dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm)/3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 2 x 1.4" (36mm) exit/2.5" (65mm) VC, B&C custom compression driver
Low Frequency Driver Power: Program: 800W / Peak: 1600W (10ms)
High Frequency Driver Power: Program: 320W / Peak: 640W (10ms)
Input Connectors: 2 x Neutrik NL4
Recommended Amplifier: N-RAK
Fittings: Adjustable (0º to 8º) rigging system
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: 15mm Multi-Laminate Birch Plywood
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 602 x 350 x 465mm
Net Weight: 33kg
Shipping Weight: 35.3kg

TECHNICAL SPECIFICATIONS
Product Type: Active 2-Way Line Array Element
Frequency Response (-6dB): 58Hz - 19.000Hz
Nominal Coverage (-6dB): 120º x 15º
Amplifier Technology: 2 channel switched mode class D with DSP
LF Section Power: RMS: 1100W / Program: 1480W / Peak: 2960W
HF Section Power: RMS: 550W / Program: 740W / Peak: 1480W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 128.5dB / 134.5dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm) / 3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 2 x 1.4" (36mm) exit / 2.5" (65mm) VC, B&C custom compression driver
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON
Power Input: 180V - 245VAC
Power Consumption: 770W
Dimensions (WxHxD): 602 x 350 x 465 mm
Net Weight: 35.6kg
Shipping Weight: 37.5kg

Frequency Response (-6dB): 58Hz - 19.000Hz
Low Frequency Extension (-10dB): 48HZ
Low Frequency Driver: 1 x 12" (300mm)/3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver : 2 x 1.4" (36mm) exit/2.5" (65mm) VC, B&C custom compression driver
Dimensions (WxHxD): 602 x 350 x 465 mm
Net Weight: 34.5kg
Shipping Weight: 35.8kg

TECHNICAL SPECIFICATIONS
Product Type: 3-Way Active Line Array Element
Frequency Response (-6dB): 58Hz - 19.000Hz
Low Frequency Extension (-10dB): 54Hz
Nominal Coverage (-6dB): 100º (300Hz - 16kHz) x 10º
RMS Power: 2000W (LF:1000W | MF:500W | HF:500W)
Amplifier Technology: 3-Channel UMAC Class D - Full Bandwidth PWM Modulator With Ultra-Low Distortion
DSP Technology: 96kHz / 40 bit SHARC DSP
Latency: 1.5ms or 0.5ms with "Low Latency Mode"
DSP Adjustable Parameters
Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | Groups: Mute, Delay, Level, Polarity, EQ
DSP Presets: 24
Delay Adjustment: 500ms (172m)
Control Type: Control via LCD and Encoder on the Back Panel | Control via Software Using Ethernet (RJ45)
Maximum SPL (calculated): RMS: 136dB | Peak: 142dB (Full-Space)
Low Frequency Driver: 2 x 10" / 3" VC, Neodymium, B&C Custom Speaker
High Frequency Driver: 1 x 1.4" Neodymium Coaxial Ring Radiator Driver (MF: 3" VC | HF: 2" VC)
Audio Signal Inputs
Analog | AES (AESOP)
Input Connectors: 1 x XLR | 1 x Neutrik EtherCON
Audio Signal Outputs
Analog | AES (AESOP) 32kHz - 196kHz
Output Connectors: 1 x XLR | 1 x Neutrik EtherCON®
Protections: Clip Limiter | Temperature | Over Current | DC Protection | HF Protection
Cooling Type
Convection with External Aluminum Heat Sink
Power Supply: UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter
Power Input: AC 100V - 240V 50Hz/60Hz
Mains Connector: Dual (IN/OUT) Neutrik powerCON TRUE1 TOP®
Power Consumption: 500W
Recommended Subwoofer: LAs518A
Fittings: 3-Point Adjustable Rigging System (0º to 10º with 1º Step)
Handles: 1 on Each Side, 2 on the Back
Grille: Black Perforated Steel
Construction: 15mm Multi-Laminate Birch Plywood
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 720 x 350 x 550 mm (28.3 x 13.8 x 21.7 in)
Net Weight: 33kg (72.8lb)

Frequency / Type of X-Over (LF to MF): 350Hz, 24dB/oct Linkwitz-Riley
Frequency / Type of X-Over (MF to HF): 1050Hz, 48dB/oct Linkwitz-Riley
Low Frequency Driver Power: Program: 1600W / Peak: 3200W (10ms)
Medium Frequency Driver Power: Program: 500W / Peak: 1000W (10ms)
High Frequency Driver Power: Program: 440W / Peak: 880W (10ms)
Dimensions (WxHxD): 1020 x 380 x 501 mm
Net Weight: 66kg
Shipping Weight: 69.1kg

TECHNICAL SPECIFICATIONS
Product Type: 2-way passive line array element
Frequency Response (-6dB): 75Hz - 19.000Hz
Nominal Coverage (-6dB): 105º x 12º
Program Power: 600W
Peak Power: 1200W
Nominal Impedance: 16Ω
Frequency / Type of X-Over: 1200Hz passive (internal)
Recommended High-Pass Filter: 65Hz, 18dB/oct Butterworth (Full-Range Operation)
Recommended High-Pass Filter (w/ Subwoofer): 140Hz, 24dB/oct Linkwitz-Riley
Sensitivity (1W, 1m): 100dB (Full-Space)
Maximum SPL (calculated): 127.6dB/130.6dB (Full-Space)
Low Frequency Driver: 2 x 6.5" Planar Diaphragm, Neodymium Custom Speaker
High Frequency Driver: 1 x 1" (25mm) exit/ 2" (51mm) VC HT Polymer Diaphragm, B&C custom Neodymium Compression Driver
Input Connectors: 2 x SpeakON NL4 parallel wired
Recommended Amplifier: LAs15A / N-RAK
Fittings: 3-point adjustable rigging system (0º to 12º with 1º Step)
Handles: 2 x side handles
Grille: Black Perforated Steel
Construction: 15mm Multi-Laminate Birch Plywood
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 499mm x 195mm x 430mm
Net Weight: 15kg

TECHNICAL SPECIFICATIONS
Product Type: Active Coaxial Stage Monitor
Frequency Response (-6dB): 58Hz - 19.000Hz
Nominal Coverage (-6dB): 80º Conical
Amplifier Technology: 2 channel switched mode class D with DSP
LF Section Power: RMS: 1100W / Program: 1480W / Peak: 2960W
HF Section Power: RMS: 550W / Program: 740W / Peak: 1480W
DSP Technology:Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or near panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated)
135dB / 141dB (Half-Space)
Low Frequency Driver:1 x 14" (355mm) / 3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 1 x 2" (50.5mm) exit / 3" (76mm) VC, Neodymium, B&C custom speaker
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON
Power Input;: 180V - 245VAC
Power Consumption: 770W
Dimensions (WxHxD): 564 x 390 x 475 mm
Net Weight:25kg

Technical Specifications
Product Type: Active Reflex Subwoofer
Frequency Response (-6dB): 38Hz - 160Hz
Amplifier Technology: Switched mode class D with DSP
Amplifier Power: RMS: 2200W / Program: 2960W / Peak: 5920W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, Delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 136.4dB / 139.4dB (Half-Space)
Low Frequency Driver: 1 x 18" (460mm) / 4" (100mm) VC, B&C custom speaker
Input Connectors: Signal: 2 x XLR ; Power: 2 x powerCON
Power Input: 180V - 245VAC
Power Consumption: 770W
Dimensions (WxHxD): 602 x 664 x 750 mm
Net Weight 67.3kg

Low Frequency Driver: 1 x 18" (460mm), 4" (100mm) VC, B&C custom speaker
Recommended Amplifier: Powersoft X4, Powersoft X8
Dimensions (WxHxD): 602 x 664 x 750 mm
Net Weight: 66kg
Shipping Weight: 68.5kg

TECHNICAL SPECIFICATIONS
Product Type: Ultra-Compact Reflex Subwoofer
Frequency Response (-6dB): 44Hz - X-over
Nominal Impedance: 4Ω
Sensitivity (1W, 1m): 102dB (Half-Space)
Maximum SPL (calculated): 135dB/138dB (Half-Space)
Low Frequency Driver: 1 x 15" (380mm)/4" (100mm) VC, long excursion, B&C custom speaker
Low Frequency Driver Power: 2000W/4000W (10ms)
Input Connectors: 1 x Neutrik NL4
Dimensions (WxHxD): 499 x 475 x 580mm
Net Weight: 40kg

Amplifier Technology: 2 Channel - PFC switched mode class D with DSP
DSP Technology: controlled USB/Networkable DSP 24bit/96kHz
DSP Adjustable Parameters: 10 PEQ/LSF/HSF, Sub Delay, Satellite Delay, System Delay, HPF, LPF, Level, Polarity, Mute
Dimensions (WxHxD): 499 x 475 x 580mm
Net Weight: 45kg

TECHNICAL SPECIFICATIONS
Product Type: Active High Power Reflex Subwoofer
Frequency Response (-6dB): 28Hz - 250Hz
Low Frequency Extension (-10dB): 24Hz
Amplifier Technology: PFC switched mode class D with DSP
Amplifier Power: RMS: 3200W / Program: 4500W / Peak: 6400W
DSP Technology: controlled DSP 24bit/48kHz - Powersoft Armonia
DSP Adjustable Parameters: 5 PEQ, Delay, HPF, LPF, Level, Polarity, Mute
DSP Presets: 3 Factory and 1 User, selectable via software or rear panel switch
Control Type: Ethernet connection to Powersoft Armonia
Maximum SPL (calculated): 140dB/143dB (Half-Space)
Low Frequency Driver: 2 x 18" (460mm)/4"(100mm) VC, high excursion, B&C custom speaker
Input Connectors
Signal: 2 x XLR ; Power: 2 x powerCON ; Control: RS485/USB
Power Input: 90V - 264V
Power Consumption: 1200W
Fittings: 16 x M8 threaded inserts for optional wheel kit, 8 replaceable feet
Handles: 4 on each side
Grille: Black Perforated Steel
Construction: Heavily braced, 18mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 1030 x 516 x 920mm (40.55 x 20.31 x 36.22in)
Net Weight: 89kg (196.21lb)

Program Power: 6000W
Peak Power: 12000W (10ms)
Recommended High-Pass Filter: 28Hz, 18dB/oct Butterworth
Sensitivity (1W, 1m): 109dB (Half-Space)
Dimensions (WxHxD): 1030 x 516 x 920 mm
Net Weight: 90kg
Shipping Weight: 96.8kg

TECHNICAL SPECIFICATIONS
Product Type: Passive Very High Power Reflex Subwoofer
Frequency Response (-6dB): 28Hz - 250Hz
Low Frequency Extension (-10dB): 24Hz
Program Power: 6000W
Peak Power: 12000W (10ms)
Nominal Impedance: 2 x 4Ω
Frequency / Type of X-Over: 60Hz to 180Hz | 24dB/oct Linkwitz-Riley (recommended)
Recommended High-Pass Filter: 28Hz, 18dB/oct Butterworth
Sensitivity (1W, 1m): 109dB (Half-Space)
Maximum SPL (calculated): 143.8dB / 149.8dB (Half-Space)
Subwoofer Driver: 2 x 18" (460mm) / 4.5" (116mm) VC, very high excursion, B&C custom speaker
Input Connectors: 2 x Neutrik NL4 on back 1 Neutrik NL4 on front, parallel wired
Recommended Amplifier: N-RAK
Fittings: 16 x M8 threaded inserts for optional wheel kit, 8 replaceable feet
Handles: 4 on each side
Grille: Black Perforated Steel
Construction: Heavily braced, 18mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 1030 x 516 x 920 mm
Net Weight: 90kg
Shipping Weight: 96.8kg

Active Double Bass Reflex Subwoofer
B&C Custom 2x18"
5000W Class-D, 144dB Peak (Obs: wheels not includ.)

Maximum SPL (calculated)
1TECHNICAL SPECIFICATIONS
Product Type: Tuned Dipolar, Variable Beam Straight Line Array
Frequency Response (-10dB): 135Hz - 20kHz
Nominal Coverage (-6dB): 90º (+/-20º 1.5-5kHz) H x 25º(+/-10º 1.2-16kHz) / (+10º/-5º 1.5-16kHz) V
Program Power: 480W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 97dB (Music) / 100dB (Vocal)
Maximum SPL (calculated): 123.1dB (Music) / 126.1dB (Vocal)
Full-Range Driver: 8 x 3" (70mm)/0.75" (20mm) VC, custom neodymium speaker
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Subwoofer: HFA115s, HFA115sHP, HFA118sHP
Recommended Amplifier: MA1700
Special Features: Vocal or Music / Narrow or Wide (User Selectable)
Construction: Aluminum / Wood / Steel / 3D Fabric
Dimensions (WxHxD): 108 x 685 x 153mm
Net Weight: 6.2kg

NEXT Matrix M8 Dummy - Empty Column Array

NEXT Wall Bracket for I6/I8, White

NEXT Wall Bracket for I6/I8, Black

NEXT Wall Bracket for I4, White

NEXT Wall Bracket for I4, Black

NEXT Kit for vertical adjustment for PX series

NEXT Wheel Kit LAs418/A

NEXT Flying Frame for LA122 Series HD Version (>8un.)

NEXT Flying Frame for LA26

NEXT Flying frame for LA212x (<10un.)

NEXT Flying Frame for LA122 Series Light Version (<8un.)

NEXT Flying frame for LA212x Heavy Duty (>10un.)