Filters

Case FC AVANTIS, Doghouse, Wheel, Split-Lid

• 96kHz FPGA Processing
• 64 Input Channels
• 42 Bus
• Fully Configurable Mix Architecture
• dPack Upgradable
• 12 RackExtra FX slots
• Two 128×128 I/O Ports
• 16 DCAs
• Range of Remote Expanders
• 15.6” Full HD capacitive touchscreen
• 18 assignable SoftKeys
• 12 faders, 6 layers
• 6 Analog and 1 stereo AES Inputs
• 6 Analog and 1 stereo AES Outputs

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "flo

The Palmer PAN02 PRO is an active DI-box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of +20 dBu. The Groundlift switch has a "lift" position allowing adjustments between a "soft and hard grounding" . The balanced output is achieved with a h

The Palmer PAN04A is 2-channel DI box for feeding asymmetrical and high impedance electric instrument signals into a mixing deskƒ??s microphone inputs. It delivers a transformer balanced, low impedance signal to the outputs and eliminates mains hum and interference caused by ground loops. The active switch leaves the frequency response unaffected and achieves a high dynamic range. In addition to

Radial - RADPASDI - Passive Stereo DI with Jensen transformers

- Type: Analog Mixer
- Channels: 16
- Faders: 16 x 60mm
- Inputs - Mic Preamps: 8 x XLR-1/4" combo, 2 x XLR
- Phantom Power: 48V, Channels 1-11/12
- Inputs - Line: 8 x 1/4"
- Inputs - Other: 2 x Dual RCA Stereo
- Outputs - Main: 2 x XLR, 2 x 1/4"
- Outputs - Other: 2 x 1/4" (Monitor)
- Aux Sends: 4 x 1/4"
- Busses/Groups: 1 x Stereo, 4 x Groups
- Headphones: 1 x 1/4" TRS
- Other I/O: 1 x 1/4" (footswitch)
- EQ Bands: 3-band (High, Mid, Low)
- Effects: SPX with 24 programs
- Rackmountable: Rack Mount Kit Included
- Power Source: Standard IEC AC cable (included)