Ceiling Mount Adapter for VXS series “M model”.

Ceiling Mount Adapter for VXS series “M model”.

Ceiling mounting bracket for Yamaha VXS3S subwoofer. Black.

Ceiling mounting bracket for Yamaha VXS3S subwoofer. White.

CP4SW - CONTORL PANEL FORDME - 4 SWITCH

Faders: 2
User Defined Keys: 16
User Defined Knobs: 4
Scene Memory Keys: Update, Preview, Store, Recall, Inc, and Dec
Monitor Control for Monitor A/B
Panner: 1
Jog Wheel: 1
Power supply: AC INPUT and EXT DC INPUT for power supply redundancy
Power consumption: 20 W
Dimensions (W x H x D): 191 mm x 323 mm x 562 mm (7.6" x 12.8" x 22.2")
Net Weight: 7 kg (15.5 lb)

-Freq Range: pass: 33Hz-3.5kHz/ normal: 35Hz-150Hz/ extend: 33Hz-150Hz
-LF: 15" Cone, 4" Voice Coil, Ferrite magnet
-nominal impedance: 8 ohms

-Freq Range: pass: 33Hz-3.5kHz/ normal: 35Hz-150Hz/ extend: 33Hz-150Hz
-LF: 15" Cone, 4" Voice Coil, Ferrite magnet
-nominal impedance: 8 ohms

2-way loudspeaker with a 2” HF and a 10" LF
Features Yamaha's own Wide Dispersion CD Waveguide Horn
High power 700W(PGM) power handling and Bi-amp capable
Floor monitoring setting
Lightweight yet very durable plywood cabinet with premium graded Polyurea coating
Dual-angle pole socket
Optional speaker cover (SPCVR-DZR10)
Rotatable horn and variety of U-bracket options (UB-DZR10H/V)

-2-way loudspeaker with a 2” HF and a 15" LF
-Features Yamaha's own Wide Dispersion CD Waveguide Horn
-High power 800W(PGM) power handling and Bi-amp capable
-Floor monitoring setting enables mirroring configuration
-Lightweight yet very durable plywood cabinet with premium graded Polyurea coating
-Dual-angle pole socket
-Optional speaker cover (SPCVR-DZR15)
-Rotatable horn

-Twinax cable 30AWG, Passive
-Cable length: 3m

Dante-MY16-AUD2 card is a fully compatible Yamaha Mini-YGDAI standard card that instantly Dante enables your Yamaha mixer, processor or power amp. Each Dante-MY16-AUD2 provides 16 bidirectional audio channels (8 at 96 kHz) and full Dante network audio redundancy over Gigabit Ethernet.

- Max power: 1000W
- Max SPL: 131dB
- Frequency range: 52Hz-20kHz
- LF: 12 inch cone
- HF: 1.4 inch diaphragm
- Coverage: H90 x V60
- Weight: 15.8 kg
- DSP processing & protection
- 2ch mixer with XLR, TRS & RCA inputs

Een met 1 volumeregelaar en 4 schakelaars uitgerust bedieningspaneel voor wandmontage voor de MTX/MRX-serie en de MA/PA-serie. Eenvoudige aansluiting door CAT5 met RS485 + voeding. Er kunnen maximaal 8 DCP's op 1 apparaat van de MTX/MRX-serie worden aangesloten. Er kan 1 DCP1V4S op 1 MA2030a/MA2030 worden aangesloten. Er kunnen maximaal 2 DCP's op 1 MA2120 of PA2120 worden aangesloten.

The Broadcast Package (DEK-DM7-BR) is a software package that adds broadcast functionality to the DM7 series.

Functions: Mix Minus, Fader Cue Release, Back Stop PFL, Audio Follow Video, Source Selection Mix Mode, Speaker Selection, Loudness Meter, Peak Program Meters (PPM), 5.1 Surround (Future Update)

Dedicated dolly for STAGEPAS 1K (Can be connected with the dedicated cover)

• 24 bit 96kHz/48kHz
• Inputs: 16x Mono + 1x Stereo + 2x FX returns
• Outputs: 6x Aux +2x FX +1x Stereo +2x Matrix
• Inputs: HPF, 4band PEQ, 2 DYN, DLY
• Outputs: 4band PEQ, Flex12 GEQ, DYN, DLY
• FX: New reverb algorythms/18 presets
• 9” capacitive multitouch LCD -> better GUI
• I/O: 12XLR+4 combo inputs, 8 XLR outputs
• Dante (DM3 only): 16x in & 16x out, @96kHz
• USB :(18 channels), USB recording & playback @96kHz
• Ethernet > Stagemix, Editor, Monitormix, PVC/PVT, OSC
• Rackmountkit RK-DM3
• External PSU PA-L500 (4 pin XLR)
• Cubase AI included
• VST Rack Elements

Input mixing channels: 120 mono
Buses: 48 Mix + 12 Matrix + 2 Stereo
Display: 12.1" multi-touch screen x 2, 7" multi-touch screen x 1
Faders: 28 (12 + 12 + 4)
Analog I/O: 32 inputs / 16 outputs
Dante: 144 in / 144 out
AES/EBU: 2 in / 2 out (with SRC)
Slot: PY Slot x 1
USB Audio Interface: 18 in / 18 out
Power supply: Redundant power supply built-in
Power consumption: 240 W
Dimensions (W x H x D): 793 mm x 324 mm x 564 mm (31.3" x 12.8" x 22.2")
Net Weight: 23.5 kg (51.8 lb)

• Mixing Channels : 72 Mono Inputs, 48 Mix + 12 Matrix + 2 Stereo
• Sampling Frequency : 96k / 48k Hz
• 1 x 12.1" Touch Screen + 1 x 7" Utility Screen
• 12 + 4 faders
• Local I/O: 16 mic / line inputs + 16 outputs + 1 x AES outputs
• 18 in / 18 out Audio Interface via USB 2.0
• 144 in / 144 out Dante interface
• 1 x PY Slot
• Dual Power Supply
• Dimensions: W468 (18.4") x H324 (12.8") x D564 (22.2") mm
• Net Weight: 16.5kg (37.0lbs)

DME64N - DIGITAL MIXING ENGINE - MAX 64 IO CAPACITY

-operating modes: Standard: 16 channels of Dugan mixing at 44.1 or 48kHz, ADAT connectors link multiple Dugan units
High-rate: 8 channels of Dugan mixing at 88.2 or 96kHz sample rate, ADAT connectors link multiple Dugan units
Shared: 8 channels of Dugan mixing and 8 channels of general purpose ADAT I/O
-audio latency: 0.2ms
-gain: unity

-Powered 15” subwoofer with 4” Voice Coil
-Maximum 136dB SPL and 33Hz-150Hz frequency range
-High power 1600W Class-D amplifier module
-96kHz DSP and FIR filter for true high-definition sound, low latency
-Equipped with D-XSUB processing and cardioid mode capability
-Lightweight yet very durable plywood cabinet with premium grade Polyurea coating

-Powered 18" subwoofer with 4" Voice Coil
-Maximum 136dB SPL and 30Hz-150Hz frequency range is ideal for today’s sound engineering demands
-High power 1600W Class-D amplifier module
-96kHz DSP for true high-definition sound with super low latency
-Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display

-Powered 18" subwoofer with 4" Voice Coil
-Maximum 136dB SPL and 30Hz-150Hz frequency range is ideal for today’s sound engineering demands
-High power 1600W Class-D amplifier module
-96kHz DSP for true high-definition sound with super low latency
-Access a variety of DSP functions and load presets, or make precise adjustments to PEQ, delay and routing etc. via the intuitive LCD display

• 18’’ LF transducer
• 1020 watts of power
• 4’’ voice coil (compared to 2,5’ ’ in DXS12 & DXS15)
• lowest frequency range (down to 32 Hz)
• highest SPL of the series (136 dB SPL)
• selectable X-OVER frequency: 80/100/120Hz
• D-XSUB Bass Processing:
• choose from either NORMAL, BOOST or XTENDED LF settings
• Newly developed unique feature, Cardioid Mode Button for cleare r sound on stage

-Powered 18” subwoofer with 4” Voice Coil
-Maximum 136dB SPL and 30Hz-150Hz frequency range
-High power 1600W Class-D amplifier module
-96kHz DSP for true high-definition sound with super low latency
-Equipped with D-XSUB processing and cardioid mode capability
-Lightweight yet very durable plywood cabinet with premium grade Polyurea coating

-Powered 18" subwoofer with 4" Voice Coil
-Maximum 136dB SPL and 30Hz-150Hz frequency range is ideal for today’s sound engineering demands
-High power 1600W Class-D amplifier module
-96kHz DSP for true high-resolution sound with super low latency
-Equipped with Dante I/O (2in/2out) and features SRC (sample rate conversion) allowing 48kHz device compatibility

-2-way powered loudspeaker with a 2” HF and a 10" LF
-Maximum 137dB SPL and 44Hz-20kHz frequency range
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter for true high-resolution sound with super low latency
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion
-D-Contour and highly reliable protection circuits

-2-way powered loudspeaker with a 2" HF and a 10" LF
-Maximum 137dB SPL and 44Hz-20kHz frequency range is ideal for today’s audio engineering demands
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter for true high-resolution sound with super low latency
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion

-2-way powered loudspeaker with a 2" HF and a 10" LF
-Maximum 137dB SPL and 44Hz-20kHz frequency range is ideal for today’s audio engineering demands
-High power 2000W Class-D amplifier module
-96kHz DSP and FIR filter for true high-resolution sound with super low latency
-Features Advanced FIR-X tuning, the combination of FIR filtering and correct EQ for minimizing phase distortion