UHF Dipole 626-698 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

The UA864 antenna provides wideband RF coverage in a low-profile enclosure that easily mounts on a wall or ceiling. The neutral white housing allows the antenna to blend into corporate or classroom settings, and is paintable to match interior colour schemes.

The UA864 antenna provides wideband RF coverage in a low-profile enclosure that easily mounts on a wall or ceiling. The neutral white housing allows the antenna to blend into corporate or classroom settings, and is paintable to match interior colour schemes.

The UA864 antenna provides wideband RF coverage in a low-profile enclosure that easily mounts on a wall or ceiling. The neutral white housing allows the antenna to blend into corporate or classroom settings, and is paintable to match interior colour schemes.

UHF Dipole 670-742 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

UHF Dipole 690-746 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

UHF Dipole 694-758 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

UHF Dipole 710-790 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

UHF Dipole 740-814 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

Active directional log periodic dipole antenna VHF 174<=>216 MHz, on axis gain 7,5 dBi with +12,+6,0,-6 gain switch, gain and overload Leds

UHF Active Directional Antenna Wide Band

The UA874 series of antennas delivers improved wireless signal reception for VHF and UHF wireless systems. Features include rejection of RF signals outside the coverage area and an integrated amplifier with four gain settings.

UHF Dipole 750-822 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

UHF Dipole 750-960 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

UHF Dipole 774-865 Mhz, For BLX4R, SLX, ULX, QLX-D, ULX-D, UHF-(R), PSM900 & 1000

In-line power adapter supplies 12V DC bias power over a coaxial cable and supports up to 3 active antenna devices.

In-line power adapter supplies 12V DC bias power over a coaxial cable and supports up to 3 active antenna devices.

Modular mute switch allows the performer to easily mute a wireless handheld microphone. Features include a recessed switch to avoid accidental activation, no effect on battery life, and over 50 dB attenuation.

Modular mute switch allows the performer to easily mute a wireless handheld microphone. Features include a recessed switch to avoid accidental activation, no effect on battery life, and over 50 dB attenuation.

The ULXD1 is a wireless bodypack transmitter compatible with ULX-D Digital Wireless Systems.

- rack tray for PG, SM and Beta analog receivers (BLX4 and BLX88)

Rack tray for two SBC250 Networked Charging Stations. Can be rack or wall mounted.

Double Microphone Holder

- dynamic
- frequency esponse: 50 to 12,000 Hz
- polar pattern: omnidirectional
- impedance: low (300 ohms actual)
- output level: open circuit voltage: -51.5 dBV/Pa* (2.7 mV) *1 Pascal = 94 dB SPL
- length: 200 mm
- well-suited to location interviews, sports broadcasting, and other situations

- dynamic
- frequency esponse: 50 to 12,000 Hz
- polar pattern: omnidirectional
- impedance: low (300 ohms actual)
- output level: open circuit voltage: -51.5 dBV/Pa* (2.7 mV) *1 Pascal = 94 dB SPL
- length: 244 mm
- well-suited to location interviews, sports broadcasting, and other situations

- electret Condenser
- frequency response: 90 - 20,000 Hz
- polar pattern: supercardioid / lobar
- impedance: 144 O
- integrated preamplifier design (not modular)
- compatible with VP89S premium accessories

- electret condenser
- frequency response: 50 -20,000 Hz
- polar pattern: supercardioid / lobar
- superior RF immunity that avoids unwanted audio artifacts from cellular and RF devices
- easily accessible controls at the back of the microphone

- 2 AA alkaline batteries for 10 hours of battery life in Record mode
- detachable 3.5 mm gold-plated audio connector output cable
- standard size shoe mount with a 1/4" threaded base for on-camera use or easy mounting on a stand
- foam windscreen (windjammer available separately)
- electret condenser
- frequency response: 50 - 20,000 Hz
- polar pattern: supercardioid/lobar

- single-point stereo (MS configuration) condenser
- frequency response: 40 to 20,000 Hz
- polar pattern: mid cartridge: cardioid (unidirectional); side cartridge: bidirectional
- impedance: rated at 150 (100 ohms actual).
- output level: open circuit voltage: -66 dB* (0.5 mV) Mid. (Side level 1.6 dB higher than Mid level) *0 dB=1 V/Pa*
- Includes windscreen, swivel adapter and Y-cable

- transducer type: condenser
- polar pattern: lobar
- frequency response: 40 Hz - 20 kHz
- sensitivity (1 kHz): -33,5 dBV/Pa / 21,1 mV/Pa
- equivalent selfnoise: 15 dB
- sound pressure: 132 dB @ 2500 Ohms load
- weight: 174g
- modular design with reduced visual appearance
- easy handling (camera- or boom-mounted)
- premium preamplifier design with RF immunity