Als directionaliteit telt. UniPlex levert superieure, directionele opname van de stem voor presentaties, conferenties, onderwijs, broadcast en meer. Als lavalier-microfoon met een cardioïde richtingskarakteristiek is UniPlex de perfecte oplossing voor spreeksituaties waar geluiden van het toneel, uit het publiek of van presentatoren in de buurt buiten gesloten moeten worden.

- microphone mounting clip for all Shure Handheld transmitters

Molten plastic carrying case with soft interior for compatible Shure wireless systems

ALSO IN THE BOX
1 - 95D16526 Carrying Case
1 - WA371 Swivel Adapter
1 - PS24 Power Supply
1 - 31B1856 Thread Adapter

Replaces PS21E and PS23E - PSU for PG/SLX Receiver

verpakt per 4

Antenna distribution unit with switable bands (VHF & UHF), 2x1 In 2x4+1(cascade) Out, 4x DC out, 10x BNC cable 0,6m, 2x BNC cable 2m, 2x BNC Bulkhead, 4x 2 type DC cable

- Type: Dynamic
- Frequency Response: 100 to 5,000 Hz
- Polar Pattern: Omnidirectional
- lmpedance: High, unbalanced
- Cable Length:20 ft (6.1 m)
- Cable Style: Two conductor shielded with standard 1/4-inch phone plug attached (supplied wired for high-impedance, unbalanced connection)
- Weight: 737 g (26 oz)

- type: dynamic
- frequency response:50 to 15,000 Hz
- polar pattern: cardioid (unidirectional)
- impedance: dual. microphone rating impedance is 150 ohms (250 ohms actual) for connection to microphone inputs rated at 19 to 300 ohms and "High" for connection to high-impedance microphone inputs.
- output level: LOW @ 1,000: open circuit voltage* -58.0 dB (1.3 mV)

- type: dynamic (moving coil)
- frequency response: 50 to 15000 Hz
- polar pattern: cardioïd
- output imp: EIA rated at 150 ohm (270 ohm actual)
- sensitivity: at 1 kHz, open circuit voltage, -58,0 dBV/Pa (1 Pascal = 94 dBSPL)
- polarity: possitive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- weight: net: 0,624 kg (1,37 lb)
- case: chrom-plated die cast

- type: dynamic (moving coil)
- frequency response: 50 to 15000 Hz
- polar pattern: cardioid
- output impedance: EIA rated at 150 ohm (250 ohm actual)
- sensitivity: at 1 kHz, open circuit voltage, L: -56,0 dBV/Pa (1,6 mV) H: -34,0 dBV/Pa (20mV) (1 Pa = 94 dBSPL)
- polarity: possitive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
- weight: net: 0,298 kg

- weight (inclusive packaging): 100g
- size (inclusive packaging): 12,2 x 5,8 x 8,6 cm
- for Shure KSM141 and KSM 137
- colour: black

Mounting flange facilitates flush-mounting of microphones onto platforms, like podiums and desktops.

Switchable in-line attenuator reduces the level of balanced microphone or line-level signal by 15, 20, or 25 dB.

Combineert, overbrugt of isoleert gebalanceerde en ongebalanceerde apparaten met verschillende impedanties en levels. Male XLR naar female XLR.

Balanced XLR in-line high pass filter that reduces low frequencies below 100 Hz.

Vermindert het niveau van een geluidssignaal met 50dB, waardoor een line level-uitgang aangesloten kan worden op een microfooningang.

Keert de fase (polariteit) om van een gebalanceerd geluidssignaal. De Phase Reverser kan een omgekeerde polariteit, die veroorzaakt wordt door een kabelfout, in een microfoonkabel corrigeren en comb filtering tussen twee signalen verminderen.

- weight (inclusive packaging): 300 g
- size (inclusive packaging): 26,0 x 12,0 x 9,0 cm
- for Beta181 preamp, 4 capsules, windscreen and mic clip
- colour: black
- with zipper

- weight (inclusive packaging): 50 g
- colour: black
- for Shure Beta 181
- kleur: zwart

- weight (inclusive packaging): 100g
- size (inclusive packaging): 20,3 x 5,1 x 14,5 cm
- colour: black
- compatible for Beta56A, Beta57A, 515 serie en de niet-leverbare 10A, Beta56 en Beta57

- Securely Mounts the Shure KRS9 microphone to a Standard microphone stand

- allows two Shure SM57, Beta 57A, or 545 Series microphones to be placed vertically on a standard microphone stand

Desk stand extension tube extends microphone stands by 3 inches and adapts Beta 56 microphones to various mounting devices.

- weight (inclusive packaging): 950 g
- size (inclusive packaging): 19,3 x 6,1 x 5,8 cm
- contains 5/8 inch threaded studs
- two microphones on one stand
- adjustabel distance between the microphones: 32mm, 67mm of 102 mm
- compatible with every microphone
- perfect for X-Y stereo miking

- elastic suspension shock mount for use with Shure SM27, Beta 27 and KSM27 microphones.

Windscreen reduces unwanted breath and wind noise while using the SM57 and 545 Series microphones.

Windscreen reduces unwanted breath and wind noise while using the SM57 and 545 Series microphones.

- provides secure thread-lock mounting
- for use with the following models only: KSM313/NE, KSM313, KSM353/ED