3.5mm stereo minijack, with a power supply of 1V minimum

- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter with bipolar output buffer, A/D converter 16bit 48kHz
- Capsule: 0.50"
- Polar Pattern: Cardioid
- Bit Depth: 16-bit
- Address Type: Side
- Frequency Range: 20Hz - 20kHz
- Maximum SPL: 110dB SPL
- Power Requirements: USB
- Output Connection: USB and 3.5mm headphone

Shotgun microphone for iphone, 3,5mm mini jack connection

Compact Cardioid Light-weight On-Camera Microphone with rycote lyre

Charging case for both transmitter and receiver.

Luxe Windshield for Videomic, NTG-1 en NTG-2

Windshield for Blimp

Dynamic Live Performance Microphone. (lifetime warranty)

Shure: UR1, UR1M, ULX1, SLX1, PGX1 and PG1.

Compacte Condenser, PAD and High Pass filter.

- Acoustic Principle: Pressure gradient
- Active Electronics: Electret condenser, A/D and USB interface
- Polar Pattern: Cardioid
- Frequency Range: 20 Hz – 20 kHz
- Input SPL @ 1% THD: 121dB (A-weighted, as per IEC651)
- Sample Rates: 48 kHz
- Bus Powered: Yes
- Bit Depth: 24-bit
- Analog Outputs: 3.5mm headphone
- Computer Connectivity: USB - simultaneous I/O Mono input, stereo output
- Output Connection: USB-C
- OS Requirements: macOS 10.12 / Windows 10

Pivot Adapter is a sturdy 210 degree pivoting adapter designed for use with any of our microphones or accessories with fixed mounting points, such as the VideoMic series, RØDEGRIP, DS1 or Boompole

USB Podcast Microphonen, Dynamic for Close Micing. Incl RM2

- Dual channel wireless microphone system for recording 2 sound sources simultaneously
- Series IV 2.4GHz digital transmission, 128-bit encryption
- crystal-clear audio at up to 200m (line of sight), optimised for extremely stable operation in dense RF environments
- 3.5mm TRS analog output, USB-C and iOS digital output
- universal compatibility with cameras, mobile devices and computers

Live dynamic vocal microphone with on/off switch
High output dynamic capsule
Gold plated XLR connectors
Internal pop-filter to reduce plosives
Feedback rejecting pick-up pattern
Heavy duty metal body
Low handling noise
Designed and manufactured in Australia
Lifetime Warranty

• Large-diaphragm (1-inch) gold-sputtered condenser capsule
• Cardioid polar pattern
• Extended frequency response
• 32-bit float digital output
• Dual Connect output – XLR and USB connectivity
• Exceptionally low self-noise (4dBA)
• High sensitivity and high SPL handling
• Ultra-low-noise, high-gain Revolution Preamp™
• High-resolution (192kHz) A/D conversion
• On-board DSP for advanced APHEX® audio processing, including a compressor, noise gate, highpass filter, and Aural Exciter™ and Big Bottom™ effects
• Studio-grade shock mount and pop filter, XLR and USB cables included
• Available in silver and black
• Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable

• Large-diaphragm (1-inch) gold-sputtered condenser capsule
• Cardioid polar pattern
• Extended frequency response
• 32-bit float digital output
• Dual Connect output – XLR and USB connectivity
• Exceptionally low self-noise (4dBA)
• High sensitivity and high SPL handling
• Ultra-low-noise, high-gain Revolution Preamp™
• High-resolution (192kHz) A/D conversion
• On-board DSP for advanced APHEX® audio processing, including a compressor, noise gate, highpass filter, and Aural Exciter™ and Big Bottom™ effects
• Studio-grade shock mount and pop filter, XLR and USB cables included
• Available in silver and black
• Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable
Box Contains
• NT1 5th Gen (Silver/Black)
• SM6 shock mount with pop filter
• 6m XLR Cable (Black/Red)
• SC29 3m USB-C to USB-C Cable

NT1 Kit Complete recording solution, BLACK

Frequency Range: Mic Inputs & Monitor Outputs: 20Hz - 20kHz
Impedance: Microphone Input: 4KΩ, Instrument Input: 1MΩ
Preamplifier Gain: 0 - 76dB
Equivalent Noise: -131.5dBV (A-weighted)
Line Output Max Level: 4dBu
Headphone Output Power: 250mW
Power Requirements: USB-C PD (9V, 3A)
Audio Outputs: 2 x combo jack (mic, instrument, line), 1 x 3.5mm TRRS headset jack (I/O)
USB Interfaces: 2-in/14-out multichannel device, 2-in/2-out with mix-minus (x2)
Bit Depth: 24-bit, Sample Rate: 48kHz
Recording Storage: microSDHC, microSDXC, USB-C removable drive (exFAT, min 100MB/s)
Data Transfer: USB 3.0 SD card reader (130MB/s)
Network Connectivity: WiFi 802.11g/n/ac (2.4GHz & 5GHz), Ethernet 100/100
Internal Storage: 4GB (SMART pads)

Key Features:
• Volledig geïntegreerde audioproductie studio
• Nieuwe, extreem stille Revolution Preamps™ (-131.5dBV EIN, 76dB gain)
• Vier hoge kwaliteit Neutrik® combo inputs voor zowel microfoons als instrumenten.
• Negen vrij toewijsbare kanalen voor gepersonaliseerde mixer configuraties.
• Acht SMART pads voor het triggeren van audiofragmenten, effecten en meer.
• Nieuwe quad-core engine wat dit product de snelste console op de markt maakt.
• Een groter 5,5” HD touchscreen met haptische feedback en een rotary encoder om gemakkelijk alle instellingen te veranderen.
• Twee USB inputs om twee apparaten tegelijk aan te sluiten.
• Geavanceerde Bluetooth® verbinding voor hoge kwaliteit integratie van telefoongesprekken.
• Studio kwaliteit audio processing en effecten aan boord, inclusief APHEX® Aural Exciter™, Big Bottom™ en Compellor™, EQ, compression, pitch shift, robot effects, reverb, delay.
• Professionele kanaal presets en VoxLab™ processing editor voor een snelle en gemakkelijke set-up.
• Opname in multitrack of stereo naar een microSD™ kaart, USB opslag of computer.
• Vier hoge kwaliteit hoofdtelefoon outputs en 1/4 inch gebalanceerde line outputs.
• Dit product is volledig bij te werken en er zal met regelmaat een firmware update beschikbaar zijn.

The RODECover 2 is a bespoke cover designed to fit perfectly over the RODECaster Pro II. Made from high-grade clear polycarbonate, it protects your RODECaster Pro II from dirt and dust and keeps your setup looking neat and professional when not in us

Professional-grade Lavalier microphone with 3.5mm TRS connector. Compatible with the RØDE Wireless GO transmitter.

3 pin XLR, with P48 phantom power.

Shotgun microphone, fantoom Power. Incl Windshield

Stereo Audio extension cable, 3,5 mm male/female. Length 3m.

RODE NTG-4+