Mixing amplifier, 4 Mic/Line inputs on Euroblock and RCA, 1 output on Euroblocks and RCA, 120W in 4/8 Ohms, 70-100V compatible without the need for external transformers, Bass/Treble tone control on each output, sleek indsutrial dessing, Crown Drivecore amplifier technology

Mixing amplifier, 4 Mic/Line inputs on Euroblock and RCA, 1 output on Euroblocks and RCA, 80W in 4/8 Ohms, 70-100V compatible without the need for external transformers, Bass/Treble tone control on each output, sleek indsutrial dessing, Crown Drivecore amplifier technology

Mixing amplifier, 8 Mic/Line inputs on Euroblock and RCA, 2 output on Euroblocks and RCA, 120W in 4/8 Ohms, 70-100V compatible without the need for external transformers, Bass/Treble tone control on each output, sleek indsutrial dessing, Crown Drivecore amplifier technology

Mixing amplifier, 8 Mic/Line inputs on Euroblock and RCA, 2 outputs on Euroblocks and RCA, 40W in 4/8 Ohms, 70-100V compatible without the need for external transformers, Bass/Treble tone control on each output, sleek indsutrial dessing, Crown Drivecore amplifier technology

Mixing amplifier, 8 Mic/Line inputs on Euroblock and RCA, 2 output on Euroblocks and RCA, 80W in 4/8 Ohms, 70-100V compatible without the need for external transformers, Bass/Treble tone control on each output, sleek indsutrial dessing, Crown Drivecore amplifier technology

Wall panel with volume control and 2-way source switching for connection to JBL CSM21 zone mixer, connection via CAT5 cable and RJ-45 connectors (not included), colour black

Wall panel with volume control and 3-way source switching for connection to JBL CSM32 zone mixer, connection via CAT5 cable and RJ-45 connectors (not included), colour: black

-Compatible with: CSM-21 CSM-32 CSM 14 CSM 28 CSMA 180/1120 CSMA 240/280/2120 VMA 160/1120/1240 VMA 260/2120 CSA 140Z/180Z/1120Z CSA 240Z/280Z/2120Z CSA 1300Z/2300Z
-Wired with Cat 5 cable with universally accepted RJ-45 connectors up to 1000 feet (305 m) length

-Frequency Range (-10 dB) 180 Hz - 20 kHz
-Power Capacity 6 Watts (at 6W tap)
-Rated Pink Noise Power 6 Watts (at 6W tap)
-Rated Pink Noise Voltage 100V distributed speaker line voltage
-Nominal Sensitivity 92 dB (6W tap, ave 300 Hz - 15 kHz)
-EN54 Sensitivity (@4 m) 80 dB (at 4m, 6W tap, per EN54-24 spectrum and measurement conditions)
-Coverage Pattern 120° conical (2 kHz)

-Frequency Range (-10 dB) 85 Hz - 18 kHz
-Frequency Response (±3 dB) 120 Hz - 16 kHz
-Power Capacity 60 Watts
-Sensitivity 86 dB SPL, 1W (2.83V) at 1m (3.3 ft)
-Maximum SPL 106 dB at 8 Ohm Direct setting;
96 dB at 10W setting
-Nominal Coverage 120ºH x 120ºV
-Nominal Impedance 8 ohms (in 8O DIRECT mode, selectable on back panel)

-Driver Sensitivity (mid-range)
(1W [2.83V], 1m, 2k - 6k Hz) 90 dB
-Frequency Range (-10 dB) Driver/Grille Assembly 85 Hz - 18 kHz
-High 90 dB sensitivity
-5 Watt multi-tap transformer for 100V, 70V and 25V distributed lines
-Very wide 175° coverage
-Fits CSS-BB4 backcan

-Driver Size (dual-cone) 200 mm (8 in)
-Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz) 96 dB
-Frequency Range (-10 dB)
Driver/Grille Assembly 55 Hz - 16 kHz
-High 96 dB sensitivity
-5 Watt multi-tap transformer for 100V, 70V and 25V distributed lines
-120° conical coverage
-Fits CSS-BB8 backcan

-Driver Size (dual-cone) 200 mm (8 in)
-Driver Sensitivity (mid-range)
(1W [2.83V], 1m, 2k - 6k Hz) 97 dB
-Frequency Range (-10 dB)
Driver/Grille Assembly 50 Hz - 17 kHz
-Very high 97 dB sensitivity
-10 Watt multi-tap transformer for 100V, 70V and 25V distributed lines
-Fits CSS-BB8 backcan

-Compatibility CSS-8004 speaker, CSS-TR4/8 tile rails
-Dimensions 89 deep x 214 diameter mm (3.5 x 8.4 in)
-Bolt Mount Circle 4 points on 165 mm (6.5 in) diameter
-Air Space 1.4 liters
-Conduit Knockouts 5 knockouts:4 on sides spaced at 90° and1 at center of top panel
-Attachment Points 4 points on 165 mm (6.5 in) diameter, clip nuts for 4 screws

-Dimensions 108 deep x 334 diameter mm (4.3 x 13.2 in)
-Bolt Mount Circle 4 points on 286 mm (11.25 in) diameter
-Air Space 4.0 liters (0.15 cu ft)
-Material Steel, zinc-plated, powder-coated
-Conduit Knockouts Five (5) knockouts:
4 on sides spaced at 90° and
1 at center of top panel
-Attachment Points 4 points on 286 mm (11.25 in) diameter with clip nuts for 4 screws.

-Frequency Response (-10 dB) 400 Hz - 7.5 kHz
-Coverage Pattern 70° horizontal by 90° vertical (at 2 kHz and averaged 1 kHz - 4 kHz)
-Sensitivity (1W, 2.83V@ 1m) 105 dB, ave. 1 kHz - 6 kHz; 111 dB at 2 kHz
-Maximum SPL (1m) 117 dB cont ave. (123 dB peak), 1 kHz - 6 kHz;
123 dB cont ave. (129 dB peak), 2 kHz, 15W input,
8 ohm setting

-Frequency Response (-10 dB) 400 Hz - 7.5 kHz
-Coverage Pattern 70° horizontal by 90° vertical (at 2 kHz and averaged 1 kHz - 4 kHz)
-Sensitivity (1W, 2.83V@ 1m) 105 dB, ave. 1 kHz - 6 kHz; 111 dB at 2 kHz
-Maximum SPL (1m) 117 dB cont ave. (123 dB peak), 1 kHz - 6 kHz;
123 dB cont ave. (129 dB peak), 2 kHz, 15W input,
8 ohm setting

-Dimensions 600 x 36 x 8 mm
(23.6 x 1.4 x 0.3 in)
-Material Punched/formed steel, zinc-plated
-Attachment Points 2 points screw onto backcan, each rail.
-Bolt Mount Circle N/A
-Air Space N/A
-Conduit Knockouts N/A

70/100 Volt transformer, 2x 120 Watt, for CSA 2120 amplifier, half 19" format, weight 2,1 kg

-Frequency Range (-10 dB) 71 Hz - 20 kHz
-Frequency Response (+/-3 dB) 96 Hz - 19 kHz
-Coverage Pattern 160° x 60°
-LF 2 x JBL 228J, 205 mm (8 in) SFG driver with 64 mm (2.5 in) edge wound voice coil
-HF 2 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm (1.5 in) voice coil
-System Sensitivity 94 dB SPL/1W/1m
-Rated Maximum SPL (1m) 129 dB
-System Nominal Impedance 8 Ohms

Packaged 8" 2-Way PA with Powered 8-Channel Mixer and Bluetooth®

Deluxe Padded Cover for EON610

Convertible Cover for EON612

Weather Resistant Cover for EON615

- Custom-designed 10-inch woofer
- 2414H compression driver
- Redesigned high-frequency horn
- Power: 1,300W peak / 650W RMS
- Frequency response: 52 Hz–20 kHz (-10 dB); 65 Hz–20 kHz (-3 dB)
- Max SPL: 125 dB
- Dispersion: 110° H x 60° V
- Audio I/Os: 2 XLR Combo, 1 XLR passthrough
- Advanced dbx DSP: Automatic Feedback Suppression, ducking, 100ms speaker delay, parametric EQ
- Built-in 3-channel digital mixer
- Backlit color LCD screen provides easy access to functions
- Universal JBL Pro Connect app control
- Bluetooth 5.0 streaming and control
- Durable talc-reinforced polypropylene cabinet and metal grille
- Ergonomic handle simplifies transport
- Built-in pole mount and optional EON700 Universal Yoke Mount expand system configuration options
- Stackable cabinets allow easy storage

- Custom-designed 12-inch woofer
- 2414H compression driver
- Redesigned high-frequency horn
- Power: 1,300W Peak / 650W RMS
- Frequency response: 50 Hz–20 kHz (-10 dB); 60 Hz–20 kHz (-3 dB)
- Max SPL: 127 dB
- Dispersion: 100° H x 60° V
- Audio I/Os: 2 XLR Combo, 1 XLR passthrough
- Advanced dbx DSP: Automatic Feedback Suppression, ducking, 100ms speaker delay, parametric EQ
- Built-in 3-channel digital mixer
- Backlit color LCD screen provides easy access to functions
- Universal JBL Pro Connect app control
- Bluetooth 5.0 streaming and control
- Durable polypropylene cabinet and metal grille
- Two ergonomic handles simplify transport
- Built-in pole mount and optional EON700 Universal Yoke Mount expand system configuration options
- Stackable cabinets allow easy storage

- Custom-designed 15-inch woofer
- 2414H compression driver
- Re-designed high-frequency horn
- Power: 1,300W peak / 650W RMS
- Frequency response: 45 Hz–20 kHz (-10 dB); 55 Hz–20 kHz (-3 dB)
- Max SPL: 128 dB
- Dispersion: 90° H x 60° V
- Audio I/Os: 2 XLR Combo, 1 XLR passthrough
- Advanced dbx DSP: Automatic Feedback Suppression, ducking, 100ms speaker delay, parametric EQ
- Built-in 3-channel digital mixer
- Backlit color LCD screen provides easy access to functions
- Universal JBL Pro Connect app control
- Bluetooth 5.0 streaming and control
- Durable polypropylene cabinet and metal grille
- Two ergonomic handles simplify transport
- Built-in pole mount and optional EON700 Universal Yoke Mount expand system configuration options
- Stackable cabinets allow easy storage

- Custom-engineered 18-inch woofer
- Power: 1,500W peak / 750W RMS
- Frequency response: 31–150 Hz (-10 dB); 40–120 Hz (-3 dB)
- Max SPL: 131 dB
- Audio I/Os: 2 XLR Combo, 2 XLR loop-outs
- Advanced dbx DSP: Parametric EQ, polarity inversion, speaker delay
- Built-in 2-channel digital mixer
- Parametric EQ, polarity inversion and speaker delay
- Color backlit LCD screen provides easy access to functions
- Durable birch plywood cabinet with patented DuraFlex finish and metal grille
- Universal JBL Pro Connect app control using powerful BLE technology
- Ergonomic handles simplify transport
- Built-in threaded pole mount expands system configuration options
- Stackable cabinets simplify cardioid configurations and equipment storage

- Mic Inputs: 2
- Phantom Power: Yes
- EQ: 8-band output EQ, customizable via presets
- Effects: Reverb, delay, chorus
- Inputs: 2x XLR/TRS combo jacks,1x 1/4” Hi-Z, 1x 1/8” aux
- Outputs: 1x 1/8” headphone,1x 1/4” pass thru
- Enclosure: Polypropylene

USB charging cable for powering external devices (e.g. AKG WMS) of EON ONE Compact, 5.5 mm connector, 5V DC to 12V DC, 1,300 mA, length 1 m