FURMAN Light Bulb 240V 7W Clear (7C7/Cl 250V)

FURMAN 12V Goose Neck 4-LED Replacement Headlight Assembly

FURMAN Key Replacement, All Furman Key Codes

- Line Voltage: 240 (Volts)
- Length: 11 (Inches)
- Width: 10.8 (Inches)
- Height: 3 (Inches)
- Weight: 4.05 (Lbs)

FURMAN Adapter Cord, 10A IEC M-F 1 Meter Quail P/N 3500.039

FURMAN Adapter Cord, 10A IEC M-F 2 Meter Quail P/N 3500.079

FURMAN 10A Male IEC To Female Uk 1M (Quail P/N 5352.006)

FURMAN Replacement Battery Pack For MB1500 and F1500-UPS

- Line Voltage: 240 (Volts)
- Length: 22.2 (Inches)
- Width: 15 (Inches)
- Height: 4.3 (Inches)
- Weight: 12.2 (Lbs)

Industry-leading IP-controlled DC power supply with built-in BlueBOLT™ technology from Panamax® for remote monitoring, control and programing from any location.

Innovative design built with integrators in mind. Reduce rack clutter, save time with BlueBOLT remote management, and provide advanced power conditioning.

The Furman M-10X e is a specific rack power distributor with eleven C13 outputs. It can connect eleven (rack) devices with schuko connectors , with schuko extension cables. As a bonus, this M-10X e gives you a noise filter (i.e., a better signal) and surge protection.

For over 40 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. Though the need for pristine AC power is nothing new, the IT-Reference 16E i’s technology and its unique implementation are revolutionary and without peer.

The extreme AC demands encountered in the professional audio/ video arena have required technological developments far in excess of typical home theater/audiophile power products. In studios, live sound, and broadcast facilities, breakdown is unacceptable. Equipment failure or poor performance is costly.

The same is true of today’s home theater. Our solution based technology, extensive engineering expertise, and robust build quality have answered the challenge of today’s corrupted power lines, and led to the creation of our flagship power conditioner, the IT-Reference 16E i.

- Line Voltage: 120 (Volts)
- Number of Outlets: 8
- Number of Isolated Banks: 2
- All 8 outlets surge protected, linearly filtered, and backed up
- AC Power Cord: Heavy duty captive power cord
- Dimensions: 17" W (19" w/ rack ears) x 19.2" D x 3.5" H (4" tall with feet installed)
- Weight: 72 lbs.

- Spike & surge protection, as well as RFI/EMI noise filtration
- Two retractable, incandescent lights with dimmer
- Digital voltmeter displays incoming line voltage
- 15 amp rating, 9 outlets

- Series Multi-Stage Protection, with LiFT and EVS
- Two retractable, long-life, low-heat LED lights with dimmer
- Voltmeter / Ammeter displays line voltage and true RMS current draw
- 20 amp rating, 9 outlets

- Line Voltage: 120 (Volts)
- Length: 13.3 (Inches)
- Width: 7.1 (Inches)
- Height: 1 (Inches)
- Weight: 0.4 (Lbs)

- Line Voltage: 120 (Volts)
- Length: 1 (Inches)
- Width: 7 (Inches)
- Height: 13.5 (Inches)
- Weight: 0.65 (Lbs)

- Power filter and power distribution with 10 A maximum output current (2300 Watt)
- Suitable for live applications and recording
- AC Noise filter
- Two retractable LED light fixtures with dimmer control
- 10x rear panel outlets and 1x front panel convenience outlet
- Protection OK indicator
- Overvoltage protection
- Main power switch at front panel
- 19" / 1U
- 19 cm Depth

- Power filter and power distribution with 10 A maximum output current (2300 Watt)
- AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI) >20 dB
- 1.5 - 20 MHz
- For all applications in recording and on stage
- 10x Rear panel outlets and 1x front panel convenience outlet
- Protection OK indicator
- Overvoltage protection
- Main power switch at front panel

- Protection circuits and noise filter
- Operating voltage 174-264 Volt; maximum surge current 6 Amps (1400 Watt max.)
- Full featured power conditioner
- Depth: 30.5 cm
- Format: 19 ", 1U
- Dimensions: 483 x 305 x 45 mm
- Weight: 7 kg

- Noise suppression> 80 dB between 20 - 20,000 Hz
- Lowest possible noise level for audio and recording applications
- SMP (Series Mode Protection) overvoltage protection
- Response Time <1 nanosecond
- 10 A (2300 watts) rated power
- 12 x IEC C-13 outputs
- USB power connector for charging media devices or for USB lamps
- Format: 19"/ 3 U
- Weight: 43.00 kg

- Line Voltage: 120 (Volts)
- Number of Outlets: 11
- All 11 outlets regulated, protected, and filtered. Rear panel: (8) 20 amp outlets and (1) 30amp outlet. 2 front panel 20 amp convenience outlets
- Regulation capture range: (LOW) 88-133 VAC @ 50/60Hz, (HIGH) 170-265 VAC @ 50/60Hz
- Compliance: cTUVus
- Over-Voltage Shutoff: 145 VAC Nominal (120VAC Input), 275 VAC Nominal (240VAC Input)

- Regulates voltages between 188 - 270 volts to 230 volts
- Integrated mains filter against interference
- Protective circuit design against voltage spikes and transients
- Rated power: 30 amps (6900 watts)
- Voltage meter
- USB charging socket
- 2 x IEC outlet on the front
- 6 x IEC outlet on the back
- 2 x IEC outlet 16 A on the rear

- Line Voltage: 120 (Volts)
- Number of Outlets: 9
- Number of Isolated Banks: 2
- Outlet Descriptions: All 9 outlets linearly filtered and surge protected
- Front Media Light(s): 2 multi-LED, dimmable lamps
- ControlFront panel: On/Off switch, Light dimmer knob
- AC Power Cord: 10 ft, captive 3/14 AWG, with NEMA 15 plug

- Line Voltage: 120 (Volts)
- Number of Outlets: 9
- Number of Isolated Banks: 2
- Outlet Descriptions: All 9 outlets linearly filtered and surge protected
- Front Panel Meter(s): Segmented LED voltmeter
- Front Media Light(s): 2 multi-LED, dimmable lamps
- Control: Front panel On/Off switch
- AC Power Cord: 10 ft, captive 3/14 AWG, with NEMA 15 plug

- Line Voltage: 120 (Volts)
- Number of Outlets: 9
- Number of Isolated Banks: 2
- All 9 outlets linearly filtered and surge protected
- Front Media Light(s): 2 multi-LED, dimmable lamps
- ControlFront panel: On/Off switch, Voltage meter dimmer button
- AC Power Cord: 10 ft, captive 3/12 AWG, with NEMA 20 plug

- 10 A (2300 Watt max.)
- IEC-320 Connectors 230 V: 8x rear panel and 1x front side
- SMP (Series Mode Protection)
- LIFT (Linear Filtering Technology) noise filtration (10 dB @ 10 kHz, 40 dB @ 100 kHz)
- Delay with 3 offsets for 3 groups with each 2 IEC C13 outlets
- Adjustable time delay of 0.5 - 10 seconds
- Auto reset after overvoltage

The PS-REL AC relay provides an alternative means of closing the contacts of a switch. Instead of being manually operated like the RS-1, it is a relay that senses the presence of AC current and in response closes the relay contacts that are wired to a terminal block. It can be used with any of the Furman products listed in connection with the RS-1.

A PS-REL is useful for determining when a certain outlet has lit up after a sequential delay, in order to extend the capacity of that outlet. It can also be used to extend the capacity of the switched socket found on many home theater receivers.
In this way, a wireless remote control can turn on the receiver, which in turn powers its switched outlet, triggering the PS-REL, which then activates a Furman PS-8R or PS-PRO power sequencer, a MiniPort, or a PowerPort system capable of switching multiple large power amps or other power-hungry equipment in multiple locations. The features of the series include multi-level protection with LiFT and EVS
Two retractable, long life, low heat LED lamps with dimmer.
Wall outlet spacing
15 amps, 9 outlets

- Two lights mounted on a 19" rack mountable plate
- Cool, efficient illumination
- Long lasting LED lights that rarely need replacing
- Adjustable dimmer switch