Transducers: LF - 1 x 4.5”, HF - 1 x .75 “ exit compression driver
Operating Range: 90Hz – 13.5 kHz
Sensitivity (1W/1m): 92 dB
Power Handling: 60W continuous @ 8 ohms
Continuous Max Output: 109 dB (115 dB Peak) @ 8 ohms
70V/100V Autoformer: 16W (@100V only), 8W, 4W, 2W, 1W (@70V only)
Nominal Beamwidth (H x V): 140° Conical
Dimensions (H x Dia): (140 x 211 mm)

Transducers: LF - 1 x 6.5”, HF - 1 x .75” exit compression driver
Operating Range: 70Hz – 13.5 kHz
Sensitivity (1W/1m): 91 dB
Power Handling: 60W continuous @ 8 ohms
Continuous Max Output: 109 dB (115 dB Peak) @ 8 ohms
70V/100V Autoformer: 30W, 15W, 7.5W, 3.75W (@70V only)
Nominal Beamwidth (H x V): 120° Conical
Dimensions (H x Dia): (346 x 254 mm)

Transducers: LF - 1 x 10”, HF - 1 x 1.25” exit compression driver
Operating Range: 58 Hz – 22 kHz
Sensitivity (1W/1m): 98 dB
Power Handling: 200W continuous @ 8 ohms
Continuous Max Output: 121 dB (127 dB Peak)
70V/100V Autoformer: 200W, 100W, 50W, 25W (@70V only)
Nominal Beamwidth (H x V): 100° Conical
Dimensions (H x Dia): (252 x 386 mm)

Transducers: LF - 1 x 4.5”, HF - 1 x .75” exit compression driver
Operating Range: 90 Hz – 18.5 kHz
Sensitivity (1W/1m): 92 dB
Power Handling: 60W continuous @ 8 ohms
Continuous Max Output: 110 dB (116 dB Peak)
70V/100V Autoformer: 30W, 15W, 7.5W, 3.75 (@70V only)
Nominal Beamwidth (H x V): 140° Conical
Dimensions (H x Dia): (91 x 248 mm)

Transducers: LF - 1 x 6.5”, HF - 1 x 1” exit compression driver
Operating Range: 65 Hz – 22 kHz
Sensitivity (1W/1m): 94 dB
Power Handling: 100W continuous @ 8 ohms
Continuous Max Output: 114 dB (120 dB Peak)
70V/100V Autoformer: 60W, 30W, 15W, 7.5W (@70V only)
Nominal Beamwidth (H x V): 125° Conical
Dimensions (H x Dia): 6.8" x 11.2" (173 x 286 mm)

Dimensions (H x Dia): 14.7" x 11.2" (374 x 285 mm)
Nominal Beamwidth (H x V): 125° Conical
70V/100V Autoformer: 60W, 30W, 15W, 7.5W (@70V only)
Continuous Max Output: 114 dB (120 dB Peak)
Transducers: LF -1 x 6.5”, HF - 1 x 1” exit compression driver
Power Handling: 100W continuous @ 8 ohms
Operating Range: 65 Hz – 22 kHz
Sensitivity (1W/1m): 94 dB

Nominal Beamwidth (H x V): 115° Conical
70V/100V Autoformer: 120W, 60W, 30W, 15W (@70V only)
Continuous Max Output: 117 dB (123 dB Peak)
Power Handling: 150W continuous @ 8 ohms
Operating Range: 60Hz – 22 kHz
Sensitivity (1W/1m): 95 dB
Dimensions (H x Dia): 17.7" x 13.4" (450 x 341 mm)
Transducers: LF -1 x 8”, HF - 1 x 1.25” exit compression driver

Operating Range: 65 Hz – 22 kHz
Sensitivity (1W/1m): 93 dB
Power Handling: 100W continuous @ 8 ohms
Continuous Max Output: 113 dB (119 dB Peak)
70V/100V Autoformer: 60W, 30W, 15W, 7.5W (@70V only)
Nominal Beamwidth (H x V): 130° Conical
Dimensions (H x W x D): 12.9" x 6.3" x 7.5" (328 x 160 x 191 mm)
Transducers: LF - 1 x 5" cone, HF - 1 x 1" exit compression driver

Operating Mode Single Amplified with DSP
Operating Environment Indoor / Outdoor Direct Exposure
Operating Range (-10dB)2 62 Hz to 18 kHz
Nominal Beamwidth (H x V) 110° x 110°
Transducers LF 1 x 8" (203 mm)

HF 1 x 1.25" (32 mm) exit compression driver
Sensitivity3 95 dB (2.83 V) 94 dB (1 W at rated impedance)
Nominal Continuous Power
Handling4 Passive 35 V (175 W @ 7 Ω)
Nominal Maximum SPL5 Passive Peak
122 dB
Continuous
116 dB
Rated Continuous Voltage6 Passive 29.2 V (29 dBV)
Rated Maximum SPL7
(Processed) Passive Peak
126 dB
Continuous
114 dB

Autoformer 70 V: 120 W, 60 W, 30 W, 15 W; 100 V: 120 W, 60 W, 30 W
Recommended Amplifiers Passive 175 W - 350 W into 8 Ω, (37 V - 53 V)
Crossover Frequency 1.4 kHz
Required Accessory 60 Hz, 12 dB/oct. electronic high pass filter

Operating Mode Single Amplified with DSP
Operating Environment Indoor / Outdoor Direct Exposure
Operating Range (-10dB)2 62 Hz to 18 kHz
Nominal Beamwidth (H x V) 110° x 110°
Transducers LF 1 x 8" (203 mm)

HF 1 x 1.25" (32 mm) exit compression driver
Sensitivity3 95 dB (2.83 V) 94 dB (1 W at rated impedance)
Nominal Continuous Power
Handling4 Passive 35 V (175 W @ 7 Ω)
Nominal Maximum SPL5 Passive Peak
122 dB
Continuous
116 dB
Rated Continuous Voltage6 Passive 29.2 V (29 dBV)
Rated Maximum SPL7
(Processed) Passive Peak
126 dB
Continuous
114 dB

Autoformer 70 V: 120 W, 60 W, 30 W, 15 W; 100 V: 120 W, 60 W, 30 W
Recommended Amplifiers Passive 175 W - 350 W into 8 Ω, (37 V - 53 V)
Crossover Frequency 1.4 kHz
Required Accessory 60 Hz, 12 dB/oct. electronic high pass filter

Sensitivity (1W/1m): 92 dB
Power Handling: 75W continuous @ 16 ohms
Continuous Max Output: 111 dB (117 dB Peak)
70V/100V Autoformer: 30W, 15W, 7.5W, 3.75W, 1.88W (@70V only)
Nominal Beamwidth: (H x V): 140° x 40°
Transducers: LF - 3 x 80mm Excursion Mylar HF - 1 x 3-element Compact Ribbon Emulator
Dimensions: (H x W x D): 10.3" x 4.62 " x 7.47 " (262 x 117 x 189 mm)
150Hz – 22 kHz

Dimensions (H x W x D): 19.9" x 4.62 " x 7.47 " (506 x 117 x 189 mm)
Nominal Beamwidth (H x V): 140° x 20°
70V/100V Autoformer: 60W, 30W, 15W, 7.5W, 3.75W (@70V only)
Continuous Max Output: 115 dB (121 dB Peak)
Transducers: LF - 6 x 80mm Excursion Mylar HF - 2 x 3-element Compact Ribbon Emulator
Power Handling: 150W continuous @ 8 ohms
Sensitivity (1W/1m): 93 dB
120Hz – 22 kHz

Dimensions (H x W x D): 64.6" x 4.62" x 7.47" (1643 x 117 x 189 mm)
Nominal Beamwidth: (H x V): 140° x 15°
Power Handling: 500W continuous @ 8 ohms
Continuous Max Output: 124 dB (130 dB Peak)
70V/100V Autoformer: 120W, 60W, 30W, 15W, 7.5W(@70V only)
Sensitivity: (1W/1m): 97 dB
Operating Range: 80 Hz - 22 kHz
Transducers: LF - 20 x 80mm Excursion Mylar HF - 4 x 3-element Compact Ribbon Em

120° x 6° information shown; refer to full specs for additional data
Dimensions (H x W x D): 44.5" x 5.5" x 7.4" (1129 x 140 x 187 mm)
Nominal Beamwidth (H x V): 120° x 12° or 120° x 6°
Continuous Max Output: 122 dB
Sensitivity (1W/1m): 95 dB
Power Handling: 600W continuous @ 12 ohms
Transducers: LF - 6 x 3.5” Neodymium; MF - 18 x 2.35”; HF - 6 x 7-element (42)

Dimensions (H x W x D): 44.5" x 5.5" x 7.4" (1129 x 140 x 187 mm)
Nominal Beamwidth (H x V): 120° x 12°
Continuous Max Output: 116 dB
Power Handling: 600W continuous @ 12 ohms
Sensitivity (1W/1m): 90 dB
Operating Range: 200 Hz – 1.6 kHz
Transducers: LF - 6 x 3.5” Neodymium drivers with optimized spacing