Qt X Controller, (8) 8 Ohm Outputs

Qt X Controller, (8) 8 Ohm Outputs, Dante

-Four channels; 175W per channel
-Impedance monitoring
-Configurable via Tesira software
-Dual AVB ports
-Bridgeable channels
-Optional analog failover
-Optional I/O expander card slot
-Front panel OLED display with capacitive touch navigation
-Front panel control of individual and chassis-wide mutes/levels
-Rack mountable (2RU)
-CE marked, UL listed, and RoHS compliant

-Four channels; 300W per channel, constant voltage
-Impedance monitoring
-Configurable via Tesira software
-Dual AVB ports
-Optional analog failover
-Optional I/O expander card slot
-Front panel OLED display with capacitive touch navigation
-Front panel control of individual and chassis-wide mutes/levels
-Rack mountable (2RU)
-CE marked, UL listed, and RoHS compliant

-Four channels; 350W per channel
-Impedance monitoring
-Configurable via Tesira software
-Dual AVB ports
-Bridgeable channels
-Optional analog failover
-Optional I/O expander card slot
-Front panel OLED display with capacitive touch navigation
-Front panel control of individual and chassis-wide mutes/levels
-Rack mountable (2RU)
-CE marked, UL listed, and RoHS compliant

-Four channels with burst mode to handle peak signals; supports up to 50W (4 Ohms) or 30W (8 Ohms) per channel
-Designed to fit on top of C-IC6 speaker via backpack or mounted separately
-Powered by PoE+ (IEEE 802.3at Class 4, 30W)
-Class D amplifier topology
-Four RJ-45 output jacks
-Audible locate button
-Software-selectable power vs. channel count
-Includes internal limiter function

50' (15m) power extension cable

5-port Room Expansion Device with AVB to Dante Bridging

-64 x 64 channels of Dante
-AES67-enabled Dante endpoint
-Dual RJ-45 connections for Primary and Secondary
-Up to 32 x 32 simultaneous flows
-Explicit Dante Input and Output blocks in Tesira Software
-Can be installed in conjunction with AVB-1 and/or SCM-1
-System configuration and control via Ethernet
-Covered by Biamp Systems’ five-year warranty

-64 x 64 channels of Dante
-AES67-enabled Dante endpoint
-Dual RJ-45 connections for Primary and Secondary
-Up to 32 x 32 simultaneous flows
-Explicit Dante Input and Output blocks in Tesira Software
-Can be installed in conjunction with AVB-1 and/or SCM-1
-System configuration and control via Ethernet
-Covered by Biamp Systems’ five-year warranty

-Four channels of balanced mic or line level input with AEC (Acoustic Echo Cancellation)
-Plug-in barrier strip connectors
-0 - 66dB gain, adjustable in 6dB increments
-Clip indicator
-+48V Phantom Power
- -100dB to +12dB fader range for level
-Signal invert for reverse polarity
-RoHS compliant and AES grounded
-Covered by Biamp Systems’ five-year warranty

-Four channels of balanced mic or line level input
-Plug-in barrier strip connectors
-0 - 66dB gain, adjustable in 6dB increments
-Clip indicator
-+48V Phantom Power
- -100dB to +12dB fader range for level
-Signal invert for reverse polarity
-RoHS compliant and AES grounded
-Covered by Biamp Systems’ five-year warranty

-Four channels of balanced mic or line level output
-Plug-in barrier strip connectors
- -100dB to +12dB fader range for level
-Signal invert for reverse polarity
-Selectable full-scale output reference level (24dBu, 18dBu, 12dBu, 6dBu, 0dBu, -31dBu) for best interface/performance
-RoHS compliant and AES grounded
-Covered by Biamp Systems’ five-year warranty

-Four channels of balanced mic or line level input with AEC (Acoustic Echo Cancellation)
-0 - 66dB gain, adjustable in 6dB increments
-+48V Phantom Power
- -100 to +12dB fader range for level
-Audio and control networking over AVB/TSN
-Powered by PoE+
-Plug-in barrier strip connectors
-Front panel LEDs for device status indications
-Half-rack chassis
-RoHS compliant and AES grounded

-Four channels of balanced mic or line level input
-0 - 66dB gain, adjustable in 6dB increments
-+48V Phantom Power
- -100 to +12dB fader range for level
-Audio and control networking over AVB/TSN
-Powered by PoE+
-Plug-in barrier strip connectors
-Front panel LEDs for device status indications
-Half-rack chassis
-RoHS compliant and AES grounded

-16 total logic connections that can be used as inputs or outputs
-4 of the 16 connections can be used as voltage control inputs
-Inputs can control actions within the software including: presets, mutes, ducking, room combining, paging functions, and much more
-Outputs can trigger status relays or indicators, or provide logic input to other controllable equipment

-Can be configured with up to three I/O cards
-Up to 12 channels of analog audio
-AVB/TSN connection to Tesira system for audio networking, configuration and control
-Plug-in barrier strip connections on cards
-Front panel LEDs for device status indications
-Internal universal power supply
-Rack mountable (1RU)
-CE marked, UL listed, and RoHS compliant

-Four channels of balanced mic or line level output
- -100 to +12dB fader range for level
-Signal invert for reverse polarity
-Selectable full-scale output reference level (24dBu, 18dBu, 12dBu, 6dBu, 0dBu, -31dBu) for best interface/performance
-Audio and control networking over AVB/TSN
-Powered by PoE+
-Plug-in barrier strip connectors
-Front panel LEDs for device status indications

-Telephony control over Ethernet
-12-button dial pad
-Redial, call volume adjustment, mute, hold, and numerous other telephony functions
-Four context (soft) buttons can be assigned to control functions
-Propagates privacy mute state to other devices
-Internal universal power supply
-100 programmable speed dial numbers; entries can be updated directly on the phone or in software

-Includes one HDMI port and one DisplayPort 1.2 port
-Accepts video signals up to and including 4K60 with 4:4:4 subsampling
-Supports a virtual matrix of up to 128 devices
-Flexible color space including Rec. 2020
-Integrated lip sync management
-Supports 8 channel PCM audio for embedding/de-embedding
-Automated EDID management between TesiraLUX and the input source

-Includes one HDMI port
-Outputs video signals up to and including 4K60 with 4:4:4 subsampling
-Supports a virtual matrix of up to 128 devices
-Flexible color space including Rec. 2020
-Integrated lip sync management
-Supports 8 channel PCM audio for embedding/de-embedding
-Supports port authentication via IEEE 802.1X
-Supports HDCP 2.2 protected content