The MASKCW bracket can carry four MASK4C or MASK6C loudspeakers of the same size and weight at an 90° angle from each other.

It is custom-designed to fit the base of the MASK4C / MASK6C ClickMount brackets, and allows the installer to fix the speakers in any spot necessary to obtain the ideal sound dispersion.

The MASKCW bracket can carry four MASK4C or MASK6C loudspeakers of the same size and weight at an 90° angle from each other.

It is custom-designed to fit the base of the MASK4C / MASK6C ClickMount brackets, and allows the installer to fix the speakers in any spot necessary to obtain the ideal sound dispersion.

microphone type unidirectional condensor
80 Hz - 16 kHz
system interconnection RJ45 - CAT5 cables, straight, according to EIA-568-B
maximum SPL 100 dB for 1% THD
dimensions (h x w x d) 54 x 110 x 165 mm
dimensions with mic (h x w x d) 494 x 110 x 165 mm
packing dimensions 120 x 195 x 455 mm
net weight 730 g
accessories supplied manual, microphone foam cap

nominal output level 100 mV
output impedance < 1 kohm
THD < 0.5%
signal to noise ratio > 60 dB
system signal output unbalanced jack connector 6.3 mm
power supply in 100 - 240 VAC/47-53Hz/1.4A max
power supply out 15 VDC/4.3A switching mode power supply
dimensions power supply (h x w x d) 38 x 53 x 115 mm
Net weight product (kg) 0,61

active
polar pattern directional, low feedback, electret capsule
buttons 4 selection + Call + All Call
indicator 1 per button + multi color status
zones 4
frequency range 80Hz - 20kHz
nominal output level 2V balanced
rated output impedance 50 balanced ohms
power type Phantom
mic stem lenght 275mm
connector RJ45
cable lenght 5m
cable type CAT5
dimensions 115x162x60 mm
weight 0.70 kg

active
polar pattern directional, low feedback
buttons 6 selection + Call + All Call
indicator 1 per button + multi color status
zones 6
80Hz-20kHz
nominal output level 2V balanced
rated output impedance 50 balanced ohms
power type Phantom
mic stem lenght 275 mm
connector open wire + RJ45
cable lenght 5 m
cable type CAT5 + 2 core screened
dimensions 115x162x60mm
weight 0.80 kg

ethernet connection 10/100 Mbit/s
integrated web server
DHCP compatible
ethernet connector RJ45
power supply 5 - 16Vdc 300mA
output connector 3 x 3.5mm jack IR emitter
IR emitters 3 included
IR receiver for IR learning
dimensions 82.5 x 57.2 x 31.8 mm
weight 0.20 kg

height 82 mm
width 78 mm
depth 65 mm
material plastic
Net weight product (kg) 0,01

Type: Niko volume controller
Impedance: 10KO
Regulation: linear
Mounting: Screw and clamp
Cable: max 2.5 mm2
Build-in box: E-MODIN
Build-on box: E-MODON
Dimensions: 90 x 90 x 85 mm (H x D x W)

dimensions 110 x 117 x 160 mm
loudspeaker system 2-way
woofer size 3 inch
tweeter size 1 inch
mounting system turn / tilt bracket
impedance (ohms) 8
low impedance dynamic power 40 watts
low impedance RMS power 20 watts
SPL 1W/1m 82 dB
frequency response 90 - 20K Hz
IP40
weight 0.80kg

-dimensions: 170 x 180 x 260 mm
-loudspeaker system: 2-way
-woofer size: 5,25 inch
-tweeter size: 1 inch
-mounting system: U-bracket
-impedance (ohms): 8
-low impedance dynamic power: 80 watts
-low impedance RMS power: 50 watts
-SPL 1W/1m: 89 dB
-frequency response: 70 - 20K Hz
-IP40
-weight: 2.45 kg

-dimensions: 170 x 180 x 260 mm
-loudspeaker system: 2-way
-woofer size: 5,25 inch
-tweeter size: 1 inch
-100V transformer power taps: 30 - 15 - 6 - 3 watts
-impedance (ohms): 16
-low impedance dynamic power: 80 watts
-low impedance RMS power: 50 watts
-SPL 1W/1m: 88 dB
-frequency response: 70 - 20K Hz
-IP40
-weight: 2.85 kg

hight 223 mm- width 233 mm
loudspeaker system 2-way - woofer size 4.5 inch
tweeter size 1 inch
mounting system dual Gripple wire suspension system - 100V transformer power taps 30 - 15 - 7.5 - 3.75 watts
70V transformer power taps 30 - 15 - 7.5 - 3.75 - 1.75 watts impedance (ohms) 16
low impedance dynamic power 200 watts low impedance RMS power 30 watts
SPL 1W/1m 91

length 200 mm
width 48 mm
depth 14 mm
battery 2x AAA LR03 alkaline 1.5V
Net weight product (kg) 0,20

supported main unit PM1122
addressing Hardwired
connector type RJ45
max. cable length 300 m
power type Phantom
inputs Bal. Mic. & Unbal. Line
width 115 mm
height 115 mm
depth 40 mm
weight 260 gr
Net weight product (kg) 0,25

height 29 mm
width 104 mm
depth 40 mm
Net weight product (kg) 0,05

Type : 2-way / 6.5"
- Rated power RMS : 20 W in 100 Volt
- Music power RMS : 32 W in 100 Volt
- SPL 1W : 92dB
- Maximum SPL : 105 dB
- Loudspeaker impedance : 8 Ohm
- Trafo Power Tappings : 8 Ohm
- 2,5 - 5 - 10 - 20W
- Frequency Range : 60 Hz - 20 kHz
- Dispersion : 4KHz / 80°
- Dispersion : 8KHz / 60°
- IP64
- HxWxD : 260 x 200 x 280 mm
- Weight : 3.75 Kg

length 86 mm
width 40 mm
depth 7 mm
net weight 18 gr
battery CR2025
Net weight product (kg) 0,02

dimensions 202 x 72 x 140 mm
oudspeaker system single
woofer size 5,25 inch
100V transformer power taps 6 - 3 - 1.5 watts
SPL 1W/1m 92 dB
200 - 20K Hz
IP50
weight 1.02 kg

dimensions 202 x 72 x 140 mm
oudspeaker system single
woofer size 5,25 inch
100V transformer power taps 6 - 3 - 1.5 watts
SPL 1W/1m 92 dB
200 - 20K Hz
IP50
weight 1.06 kg

Type : 2-way / 6i - Rated Power RMS : 16W
- Music Power RMS : 25W
- SPL 1W : 92dB
- Maximum SPL : 104dB
- Frequency Range : 80 Hz
- 20 KHz
- Loudspeaker impedance 8 Ohm
- Transfo power taps : 4 - 8 - 16W
- Dispersion 1KHz / 180°, 4KHz / 60°
- IP53 - Dimensions (dia) : 180mm
- Cable length : 3m
- Weight : 1.9 kg

height 295 mm
width 295 mm
depth 0 mm

dimensions 470 x 120 x 420 mm
woofer size 6.5 inch
impedance (ohms) 8
low impedance dynamic power 2 x 80 watts
low impedance RMS power 2 x 40 watts
SPL 1W/1m 85 dB
frequency response 50 - 200 Hz
IP20
weight 8.00 kg

height 60 mm
width 77 mm
depth 46 mm
100V transformer power taps 60 - 30 - 15 - 6 watts
input 8 ohms
output 100 volt
Net weight product (kg) 0,60

display 2 digit LED
supported main unit ZONE4
addressing Software
connector type euroblock 4-pole
max. cable 2.5 mm²
max. cable length 100 m
power type Phantom
cut-out dimensions 70 x 55 mm
width 114 mm
height 80 mm
depth 40 mm
Net weight product 0.14 kg

AMP-D225H 2 channel, 25W half-rack amplifier

PM4100 Half-rack stereo pre-amplifier/mixer with 4 inputs

PMR4000RMKIII Multi source music player with Internet/FM radio, USB player (for MP3,WAV, FLAC files), UPNP player connection to ethernet via wired or wireless, 1U, 19" rackmount, black

RMS-1 1RU rack mount shelf

SPA-GSQ100 Square grille with integrated safety wire, 12-pack (fits CM60DTD, CM30DTD, CM20DTS, CM1008D, CM608D, CM20DT, CMX20DT)