Next audiocom powered systems

05-10-23

next-flexi15-banner.jpg

The FLEXI15 is a 2000W active 2.1 compact PA system with an integrated DSP processing engine that forms a precisely matched, compact system with professional acoustic properties required by DJs and musicians for both portable use or permanent installation The 15 inch reflex loaded subwoofer provides powerful accurate bass sound while the satellites with 8 inch mid drivers and 1 inch HF drivers are responsible for natural sounding mids and crystal-clear highs. The FLEXi 15 was designed for a fast and flexible on-site setup, and maximum reliability with a modern design and a handling optimisation (the tripod is not included on the system).


Flexi 15 Powered systems

NEXT Audicom Flexi 15 15" Active speaker
NAC-FLEXI15
NEXT Audicom
NEXT Audicom Flexi 15 15" Active speaker
Product Type: Flexible Active PA System - 1 x 15" + 2 x 8"
Frequency Response (-6dB): 40Hz - 19kHz
Nominal Coverage (-6dB): 50-100° H x 55º V (User Rotatable)
Amplifier Technology: Class D with DSP
Amplifier Power: RMS: 1000W | PGM: 2000W
DSP Technology: 24bit | 48kHz DSP
DSP Presets: Flat Indoor, Flat Outdoor, Music, DJ, Vocal
Control Type: Parameters Controlled on the Subwoofer Panel
FR Maximum SPL (calculated): 121dB
SW Maximum SPL (calculated): 127dB
Subwoofer Driver: 15" Woofer | 3" Voice Coil
Low Frequency Driver: 8" Woofer | 1.5" Voice Coil
High Frequency Driver: 1.4" Driver | 1.35" Voice Coil
Audio Signal Inputs: Mono / Stereo Analog Audio
Input Connectors: 2 x XLR / TRS Combo
Audio Signal Outputs: Mono / Stereo Analog Audio
Output Connectors: 2 x XLR
Speakers Output Connectors: 2 x NL4 (1+/1-)
Protections: Overload and Overcurrent
Operating Temperature Range: 0ºC - 45ºC (32ºF - 113ºF)
Cooling Type: Speed Controlled Fan
Power Supply: Switching Mode Power Supply (SMPS)
Power Input: AC 110V - 120V | AC 220V - 240V 50Hz/60Hz
Mains Connector: Standard IEC socket
Power Consumption: 280W (1/8 Max. Power)
Special Features: Subwoofer Phase (0º / 180º) | Input Type (Mono / Stereo) | Main Level Adjust. | Subwoofer Level Adjust.
Fittings: 35mm Pole Mount Socket
Handles: Subwoofer: One on Each Side | Satellite: One on Top
Grille: Powder Coated Steel Grille with Acoustical Foam
Construction: 12mm and 15mm Multi-Laminate Plywood
Finish: Poliurea Coating
Dimensions (WxHxD): Subwoofer: 440 x 655 x 583mm (17.3 x 25.8 x 23 in) | Satellite: 250 x 440 x 238mm (9.8 x 17.3 x 9.4 in)
Accessories: Speaker Cables and Subwoofer Wheels are included
€ 1.381,98
€ 1.151,89
prices incl. taxes and VAT
3 in stock
Stock
3 in stock
fdsfsdfs.PNG

- Built-in amplifier
- Made of plywood
- combination pack
- 5 selections presets
- satellite output


Active Full-range Speaker

Knipsel 1.PNG

You can use the AUX input to connect your smartphone, tablet, TV, CD player or laptop with a 3.5mm audio connection cable. The MIC input allows you to connect your microphone directly to the device. The Instrument input lets you connect your musical instrument directly to the device.


18'' Active Subwoofer

next-pro18sa-details.jpg

- Built-in amplifier
- Made of plywood
- easy to install
- Can be combined with the Pra12A, Pro15A or MV12
- Direct Output or Post X-over Line Output


Full-Range Passive Speaker

ddddddd.PNG

- 2 speaker connections
- Easy to install
- Different suspension points
- HF Driver Protection
- You can install your speaker horizontally or vertically.


18'' Passive Subwoofer

- Low impedance input
- Made of plywood
- Easy to install
- Can be combined with the Pra12A, Pro15A or MV12