Super-cardioid Instrument Microphone for Guitar & Bass amp

- 2 x OC18 Microphones
- 2 x OCS8 Shockmounts
- 2 x OCW8 Windscreens
- 2 x OCH8 Holders
- + 1 x new SB1 Dual Mounting bar
- Complete in the new OCDC1 (OC Dual Case)

Directional characteristics: Single
Impedance: 275 O (symmetrical)
Polar pattern: Cardioid
Load impedance: > 1 kO
Frequency range: 20 Hz - 20 kHz
Supply voltage: 48 V (< 2.2mA)
Sensitivity (all directions): 13mV/Pa
Equivalent noise level: 9 dB SPL (A)
Main Connector: XLR 3 pin
Max SPL: 148 dB SPL (158 dB SPL)
Dimensions: 157 x 63 x 35 mm
Switchable pad: -10 dB, -20 dB
Weight: 335 g

- 2 x OC818 Microphones
- 2 x OCS8 Shockmounts
- 2 x OCW8 Windscreens
- 2 x OCC8 mini XLR cables
- 2 x OCH8 Holders
- + 1 x new SB1 Dual Mounting bar
- Complete in the new OCDC1 (OC Dual Case)

Dynamic super-cardioid miniature instrument microphone. Ideal for brass, drums, and woodwind. Flexible gooseneck with multifunctional clip for easy positioning. Handles high SPLs without distortion.

Super-cardioid silver instrument microphone designed for miking guitar cabs face-on and extremely close to the source. Provides isolation from other onstage signals. Also suitable for miking drums, especially toms.

Professional cardioid condenser gooseneck for superb definition. For wind instruments, congas, drums with free-floating suspension. Easily mounted/positioned. Intelligent preamp for cable. Phantom power. Level check.

- transducer type : condenser
- polar pattern: cardioid
- frequency response: 20 Hz - 20 kHz
- sensitivity (1 kHz): -46,5 dBV/Pa
- equivalent selfnoise: 20 dB(A)
- interchangeable capsules

- transducer type: condenser
- polar pattern: halfcardioid
- frequency response: 20 Hz - 20 kHz
- sensitivity (1 kHz): 48,5 dBV/Pa / 3,8 mV/Pa
- equivalent selfnoise: 25,5 dB(A)
- sound pressure: 155 dB
- weight: 470 g
- uniform half-cardioid polar pattern for maximum gain-before-feedback and rejection of off-axis sound
- precision-engineered low-profile design

- transducer type: condenser
- polar pattern: cardioid
- frequency response: 20 Hz - 20 kHz
- sensitivity (1 kHz): -56 dBV/Pa / 1,6 mV/Pa
- equivalent selfnoise: 31 dB(A)
- sound pressure: 155 dB (@ 1 kO), 163 dB (@ 2,5 kO)
- weight: 65 g

NEW! Instrument Side-address cardioid condenser microphone for instrument performance and recording. XLR-XLR cable incl.

NEW! Instrument Professional quality microphone optimized for wind instrument performance and recording. XLR-XLR cable incl.

The CAB901 is a balanced microphone cable constructed using the MC305 cable and fitted with one VC3MX 3-pin male connector and a VC3FX 3-pin female connector. The 24 AWG (0.23 mm²) thin & dense stranded bare copper conductors are surrounded by a high coverage bare copper spiral shielding. CableType: MC305 * Connector: VC3MX-VC3FX