Next Pro Audio N-RAK 20 4-Channel Power Rack
NPO-N-RAK 20
TECHNICAL SPECIFICATIONS
Product Type: 4-Channel Multi-Purpose Power Rack
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 4 x 1600w
Amplifier Power - Stereo 8Ω: 4 x 1600W
Amplifier Power - Stereo 4Ω: 4 x 3000W
Amplifier Power - Stereo 2Ω: 4 x 5200W
Amplifier Power - Bridge 8Ω: 2 x 6000W
Amplifier Power - Bridge 4Ω: 2 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply: Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Mains Connector: 3P+N+PE 32A CEE Male Plug
Power Consumption: 3A rms per Phase @ 416Y | 6A rms per Phase @ 173Y (1/8 of Maximum Power)
Special Features
Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 600mm x 624mm x 800mm
Net Weight: 57kg
Temporarily out of stock