- Audio resolution: 44.1/48/88.2/96 kHz, 16/24 bit
- Connectors: D-sub 25-pin
- Locking screws: No. 4-40 UNC (inch type)
- Nominal input level: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)
- Maximum input level: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)

- Audio resolution: 44.1/48/88.2/96 kHz, 16/24 bit
- Connectors: D-sub 25-pin
- Locking screws: No. 4-40 UNC (inch type)
- Nominal input level: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)
- Maximum input level: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)

2 In/2 Out Analog MIC/Line DANTE Converter with DSP, Euroblock connectors 1/2 19

2 In/2 Out Analog MIC/Line DANTE Converter with DSP, XLR connectors 1/2 19", 1U

- Number of channels and formats: 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit
- Analogue inputs (ANALOG IN): MM-4D/IN-E: Balanced Euroblock connectors, 3.81 mm pitch
MM-4D/IN-X: XLR connectors (XLR-3-31, 1: GND, 2: HOT, 3: COLD)
- Minimum input level: -70 dBu
- Maximum input level: +26 dBu

- Number of channels and formats: 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit
- Analogue inputs (ANALOG IN): MM-4D/IN-E: Balanced Euroblock connectors, 3.81 mm pitch
MM-4D/IN-X: XLR connectors (XLR-3-31, 1: GND, 2: HOT, 3: COLD)
- Minimum input level: -70 dBu
- Maximum input level: +26 dBu

- Number of channels and formats: 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit
- Analogue outputs (ANALOG OUT): ML-4D/OUT-E: Balanced Euroblock connectors, 3.81 mm pitch
ML-4D/OUT-X: XLR connectors (XLR-3-32, 1: GND, 2: HOT, 3: COLD)
- Nominal output level: +4 dBu (Ref(D) ? -9 dBFS), +6 dBu (Ref(D) = -9 dBFS)

- Number of channels and formats: 4 channels, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 16/24 bit
- Analogue outputs (ANALOG OUT): ML-4D/OUT-E: Balanced Euroblock connectors, 3.81 mm pitch
ML-4D/OUT-X: XLR connectors (XLR-3-32, 1: GND, 2: HOT, 3: COLD)
- Nominal output level: +4 dBu (Ref(D) ? -9 dBFS), +6 dBu (Ref(D) = -9 dBFS)

- Number of channels and format: 4 channels, 44.1 kHz, 48 kHz, 16/24-bit / 2 channels (double speed), 88.2 kHz, 96 kHz, 16/24-bit. - Input impedance: 110

- Front connectors: 16 balanced XLR panel jacks (XLR-3-31, female)
- Pin assignment: 1: Ground, 2: Hot (+), 3: Cold (-)
- Rear Connections: Two 25-pin Sub-D connectors, female
- Locking screws: No. 4-40 UNC (inch thread)

- 16 XLR output connectors on the front panel
- Dual D-Sub input connectors compliant with AES59-2012 on the rear panel
- Multiple rackmounting options
- Short unit depth allows free layout in the rack
- 1U Rackmount size
- Rackmount screws included

- 32 Channel Euroblock to D-Sub Input Adaptor for Professional Installations
- 32 channels from 25-pin D-sub connectors can be transmitted to Euroblock terminals
- Included Euroblock plugs have tabs and cable band kit
- The 25-pin D-sub connectors use TASCAM pin assignments that are compliant with AES59-2012

- Dante-enabled stage box and interface with 16 analogue audio inputs and outputs
- Redundant Dante operation using Primary/Secondary lines
- Equipped with etherCON-compatible connectors
- Support for Dante Domain Manager
- AES67 is supported to allow connection with Ravenna and other compatible audio network technologies
- Data transfer compliant to SMPTE 2110
- 16 balanced mic/line inputs (XLR) with switchable phantom power (48 V), input signal and overload indicators
- 16 balanced line outputs (XLR) with output signal indicators
- Up to 96 kHz sampling frequency at 32-bit resolution
- Can be positioned on the floor or mounted in a rack (3U)
- Fully controllable from connected Sonicview mixer
- Remote control and offline editing using Tascam IO Control software for Windows, macOS and iPadOS
- Selectable reference level
- GPIO interface with eight inputs and outputs, expands to 16 inputs and outputs when connected to a Sonicview mixer
- Selectable LED brightness
- DC input for redundant power supply (DC power supply not included)