Product Type: Class D Amplifier with DSP
Frequency Response: 20Hz - 20kHz (+0 / -1dB)
Amplifier Technology: Class D
Number of Amplifier Channels: 4 Channels
Amplifier Power - Stereo 8Ω: 4 x 250W
Amplifier Power - Stereo 4Ω: 4 x 500W
Amplifier Power - Bridge 8Ω: 2 x 1000W
Amplifier Gain: 34dB±0.5dB
Speaker Output: 4Ω - 16Ω
Damping Factor: >180
THD+N: <0.15%
SNR (Signal to Noise Ratio): >95dB
Crosstalk: >50dB
Input Sensitivity: 0.9V - 1.1V (+0 / -1dBv)
Input Impedance: Balanced: 20kΩ | Unbalanced: 10kΩ
DSP Technology: 4 IN x 4 OUT - 32bit | 192kHz DSP
Latency: 0.66ms
DSP Adjustable Parameters: PEQ, HPF, LPF, HSF, LSF, Compressor, Gate, Level, Delay, Polarity, Mute
Delay Adjustment: 62.4ms / 21.42m per Channel
Control Type: On the Amplifier Encoder and LCD | Via USB and Suplied Software "A504 DSP Controller"
Audio Signal Inputs: Analog Audio
Input Connectors: 4 x Neutrik XLR
Audio Signal Outputs: None
Output Connectors: None
Speakers Output Connectors: 4 x Neutrik NL4
Protections: Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar
Operating Temperature Range: 0ºC - 40ºC
Cooling Type: Speed Controlled Fan
Power Supply: Switching Mode Power Supply (SMPS)
Power Input: AC 110V - 120V | AC 220V - 240V 50Hz/60Hz ±10%
Mains Connector: Standard IEC socket
Power Consumption: 1100W
Fittings: 1U 19" Rack
Dimensions (WxHxD): 483 x 44 x 290mm (19 x 1.73 x 11.4 in)
Net Weight: 6kg (13.2lb)
Shipping Weight: 7.2kg (2.2 lb)

AD500 19" Rack Kit

Wall / Desktop Mount Kit for AD500

Adjustable Wall Bracket for Pro12

BAG FOR MV3

Black Grill for C5 Pro

Cover for MV10

Cover for MV6

Cover for FLEXi 15 Satellite

Cover for FLEXi 15 Subwoofer

100V Line Transformer 40W

100V Line Transformer 60W for VR6

100V Line Transformer 80W

Product Type: Battery Powered Portable Speaker
Frequency Response (-6dB): 42Hz - 20kHz
Nominal Coverage (-6dB): 100º Conical
Program Power: 150W
Peak Power: 300W
Amplifier Technology: Class D Amplifier with DSP
Mixer: 3 Channels
Effects: Reverb
DSP Presets: Tone Optimizer for Microhpone/Guitar | Automatic EQ on Speaker Stand
Wireless Connection System: BT v5.0 with TWS (True Wireless Stereo)
Wireless Range: 10m (32.8ft)
Maximum SPL (calculated): 116dB / 119dB (Full-space)
Low Frequency Driver: 10" Woofer | 2.5" Voice Coil
High Frequency Driver: 1" High Frequency Driver
Audio Signal Inputs: BT | Microphone | Instrument | USB | AUX
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x USB
Audio Signal Outputs: Mixer Output
Output Connectors: 1 x TRS 6.35mm Jack
Cooling Type: Convection
Power Input: AC 100V - 240V 50Hz/60Hz
Power Consumption: 150W (0.6A)
Special Features: USB Charging Port: 5V /1A
Battery Type: Lithium-Ion Rechargeable Battery - 5000mAh
Bat. Playback Time: Up to 8 Hours
Bat. Charging Time: 3 to 5 Hours
Fittings: 35mm Pole Mount Socket
Handles: One on Top
Construction: Light-Weight ABS Plastic
Dimensions (WxHxD): 344 x 473 x 363mm (13.5 x 18.6 x 14.3 in)
Net Weight: 11.6kg (25.6lb)
Shipping Weight: 13.7kg (30.2lb)
Accessories: MV10 Protective Cover (not included)

Bumper for Moka Sub

24 Moka Array, 6 Moka Sub, 6 Moka Sub A, 2 Mini Bumper (Cable Kit not included)

Sub15a+sub15p: 1400w PGM, 2800w Peak
Top: 540w PGM, 1000W Peak
Each set of 2 subs + 4 tops, amplifier power 4*2300w

16 Moka Array, 4 Moka Sub, 4 Moka Sub A, 2 Mini Bumper (Cable Kit not included)

Sub15a+sub15p: 1400w PGM, 2800w Peak
Top: 540w PGM, 1000W Peak
Each set of 2 subs + 4 tops, amplifier power 4*2300w

Mini Bumper for Moka Array

Pole Mount for Moka System

4 Moka Array, 1 Moka Sub, 1 Moka Sub A, 2 Mini Bumper, 2 Pole Mount, Cable Kit

Sub15a+sub15p: 1400w PGM, 2800w Peak
Top: 540w PGM, 1000W Peak
Each set of 2 subs + 4 tops, amplifier power 4*2300w

Product Type: Convertible Soundbar with BT
Frequency Response (-6dB): 100Hz - 18kHz
RMS Power: 15W + 15W
Amplifier Technology: Class D Amplifier with DSP
DSP Presets: Rock, Pop, Jazz, Live, Club, Dance, Hall, Soft, Flat, Classical
Wireless Connection System: BT v5.0
Wireless Range: >10m (32.8ft)
Full-Range Driver: 4 x 2" Full-Range Loudspeaker
Audio Signal Inputs: Stereo BT | AUX | Optical | USB | Micro SD Card
Input Connectors: 3.5mm Stereo Jack | Optical Cable | USB | Micro SD Slot
Audio Signal Outputs: Subwoofer or Other System Output (Unfiltered, Full-Range)
Output Connectors: 1 x RCA
Power Input: Power Supply: AC 100V - 240V / 50Hz-60Hz | DC 15V - 2A
Power Consumption: 30W
Special Features: Soundbar Convertible into Stereo Sound System (2 Vertical Systems)
Fittings: Plastic Feet | Multi-Directional Hanging Holes
IP Rating: Indoor Use
Dimensions (WxHxD): 980 x 55 x 60mm (38.6" x 2.2" x 2.4") [Soundbar] | 55 x 490 x 60mm (2.2" x 19.3" x 2.4") [Vertical System]
Fixation: Picture Frame Hanging Type
Net Weight: 1.6kg (3.5lb)
Shipping Weight: 2.3kg (5lb)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 75º V
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 111dB
Transformer Taps 100V: 20W | 40W | 80W
Low Frequency Driver: 6.5" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 182 x 362 x 226mm (7.2 x 14.3 x 8.9 in)
Fixation: Wall U-Bracket (included)
Net Weight: 6.5kg (14.3lb)
Shipping Weight: 15.6kg (34.4lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Volume Controller 6W with Wall Box

VR6 Wall Box

Volume Controller 6W

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 20W
Program Power: 40W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 86dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 140 x 215 x 135mm (5.5" x 8.4" x 5.3") [W4] | 140 x 245 x 158mm (5.5" x 9.6" x 6.2") [W4 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 1.8kg (3.97lb) [W4 + U-Bracket]
Shipping Weight: 4kg (8.82lb)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 1.85kg (4.08lb)
Shipping Weight: 2.7kg (5.95lb)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 208 x 280 x 208mm (8.19" x 11" x 8.19")
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 3.3kg (7.28lb)
Shipping Weight: 4.3kg (9.48lb)
Accessories: Garden Accessory for P6 (not included)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 208 x 280 x 208mm (8.19" x 11" x 8.19")
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 3.3kg (7.28lb)
Shipping Weight: 4.3kg (9.48lb)
Accessories: Garden Accessory for P6 (not included)

Wall Bracket for T4, Black