- Resolution: 8 bits
- Sampling rate: Voltage reference available on pin #1
- Input voltage range: 0 to 5 VDC
- Input voltage protection: ±30 VDC
- No Isolation with the backplane

- Rated relay switching : 5A at 130 VAC (resistive load)
- Turn on time: 5 mS
- Turn off time: 2 mS
- 4 KV Transient isolation with backplane
- 1KV Transient isolation Relay to Relay

- 8 slots hold up to 64 versatile in and/or outputs
- Easy IP (TCP or UDP) control
- Controllable with DMX-512 over Ethernet. (with Artnet Firmware)
- Controllable with MIDI over Ethernet. (with RTP-MIDI Firmware)
- Windows, Mac OS X and Linux compatible
- Operating power over the network cable.– IEEE 802-3af
- Ready for the new MMA “HD” protocol

- DAC resolution: 8 bits
- Output voltage range: 0 -10 VDC
- Maximum current driver: 4 mA/channel
- Short circuit protection: Indefinitely
- Overvoltage protection: ±30 V
- No Isolation with the backplane

- Ultra-compact ruggedised design (aluminium alloy), ideal for live/stage applications
- Fully compliant with the RTP-Midi open protocol
- USB-Midi class compliant
- Full speed USB interface
- Both USB and RTP-Midi interfaces are recognised as standard Midi interfaces by Windows, Mac OS and iOS
- Plug&Play using Apple’s Bonjour protocol
- “Session initiator” functionality, for direct peer to peer application with iOS devices (iPad, iPhone, iPod) over WiFi
- Supports both peer-to-peer and computer controlled communication
- Inter-operable with any other RTP-Midi product
- Powered by USB charger

- Voltage range: 12 to 48 VDC
- Voltage rating: 60 VDC
- Common Ground (source)
- Threshold level:voltage: ±5 VDC
- Turn on time: 5 mS
- Turn off time: 5 mS
- Overvoltage protection: ±60 V
- 4 KV Transient isolation with backplane

- Made of PA – UL 94 V0
- Simple assembly and disassembly
- M4 recessed screw

- Made of die-cast Aluminium
- Recessed spring
- Simple assembly and disassembly
- M4 recessed screw

- Sends and receives DMX-512 over Ethernet.
- Artnet compatible
- 2 independent DMX512 universes per box (one for input, one for output)
- Windows, Mac OS X and Linux compatible
- Acts as standard DMX interface.
- Multi node DMX distribution
- Operating power over the network cable.– IEEE 802-3af
- DMX to ContactClosure mapping (with IO3CC or IO8CC)
- Ready for new HD MIDI Show Control protocol

8 X Solid-state Output Card

- 3 slots hold up to 24 versatile in and/or outputs
- Easy IP (TCP or UDP) control
- Controllable with DMX-512 over Ethernet. (with Artnet Firmware)
- Controllable with MIDI over Ethernet. (with RTP-MIDI Firmware)
- Windows, Mac OS X and Linux compatible
- Operating power over the network cable.– IEEE 802-3af
- Ready for the new MMA “HD” protocol

The IOBL blindplate for I/O cardcage will fill in the gaps when not fully populating a cargecage with one or more active cards. This item contains no electroincs.

- Max current – 8A
- Impulse Voltage – 2,5 kV
- Wire stripping – max 8mm
- Max core – 1.5mm²

- Two independent MIDI IN/MIDI OUT ports.
- Fully supports the MIDI-RTP standard.
- No driver required (MAC OSX ), free driver available for Windows.
- Simple set-up using the Bonjour protocol.
- “Session initiator” functionality, for peer to peer application with iOS devices (iPad, iPhone, iPod) over WiFi
- Multi-session with full merging of up to 8 simultaneous clients.
- Sync accuracy : 0.1 millisecond ( RTP ).
- Direct UDP-IP and Peer-To-Peer mode supported.
- Operating power over the network cable. IEEE 802-3af ( PoE )
- Ready for the new MMA “HD” protocol.

- Fully Compliant with IEEE802.3af
- Full Protection OTP, OCP, OVP
- 100 to 240VAC
- Total Output Power 15.4W

- Width – 19″
- Height – 3U
- Standard DIN-Rail
- Holds up to 5 Kissbox products

- Sends and receives Serial data over Ethernet.
- High performance serial port handling with 1024 bytes FIFOs
- RS-232, RS-422 & RS-485 ( selectable per port )
- Baud rate, Start & Stop bit, # data bits & parity programmable per port
- Peer-to-Peer Serial data transmission
- Operating power over the network cable.– IEEE 802-3af
- Platform Independent

- Sends and receives Smpte LTC Time-code and MTC Midi Time-code over Ethernet.
- Reads and writes EBU/Smpte LTC at 30 – 29.97 – 25 – 24 fps
- RTP – real-time MIDI
- Controlled latency < 900 μs
- Windows, Mac OS X and Linux compatible
- Acts as standard MIDI / Smpte interface.
- Peer-to-Peer Time-code transmission
- Operating power over the network cable.– IEEE 802-3af
- Ready for the new MMA “HD” protocol