- Application: DJ & Club, Stage & Rental, Theatre
- Powerinput: AC 100 - 240V, 50/60Hz
- Power consumption: W 42
- Display LCD
- IP rating: indoor
- Modes: standalone, manual, DMX M/S
- Upgradable software
- Max. DMX channels: 13
- Colors: Red, Green, Blue, RGB
- Input: 3 pin XLR, Lockable Power Connector (Neutrik PowerCon compatible), 3 pin XLR, Lockable Power Connector (Neutrik PowerCon compatible)
- Output: Connector (Neutrik PowerCon compatible)

-This smoke liquid has been specially developed for use in LOW FOG smoke machines
-The carefully chosen composition creates a thick smoke that covers the floor but also quickly disappears as soon as the smoke starts to rise
-A perfect replacement for the expensive and difficult to transport CO2 ice
-The smoke is odorless, non-irritating, non-toxic and non-flammable

- Produces explosive columns of smoke over 12m high
- Ideal alternative to very expensive and difficult to use CO2 jet effects
- Smoke column is illuminated by 2 independently controllable LED rings (35 RGB LEDs with 315Watt total power)
- 3200W heater, together with the high-pressure compressor, provides very fast succession of powerful smoke bursts
- Can also operate upside down to produce powerful downward smoke columns
- Controllable via 5 or 11 DMX channels
- Prepared for wireless DMX: just plug in the optional WTR-DMX DONGLE
- Optional omega brackets available for truss mounting
- Works also in ECO mode: power consumption only 1600W
- Recommended fog fluid: "Super fast dissipating" fog fluid
- Connections: PowerCON TRUE1 + XLR 3pin + XLR 5pin

- Light source : 50 watt COB
- CCT : 3200K
- CRI : > 92
- Manual zoom : 10-50°
- Operation Modes : Standalone, DMX
- Included : Color Frame for use of color filters, four-leaf barndoor
- Equivalent 500W tungsten

- Perfect All-in-one solution to secure your DMX-installatioins
- Merger/Splitter/Booster
- 100% electrical isolation between all in and outputs
- 2 inputs, 6 outputs. All with 3p/5p XLR connectors
- Merger:
* HTP: Highest value has priority
* Backup: Channel A has priority until A fails or has no DMX, Channel B takes over.
* Merge: Two desks are merged, both control specific channels

Mounting clamps for tubes between 48 and 51 mm.
Including M12 bolt and wing nut to attach any adapted bracket.
Black color.

- Controller voor directe controle van kettingtakels met 3-fasige aansluiting.
- Bedient max. 4 motoren.
- Er kunnen diverse eenheden worden gekoppeld in master/slave via de in-/uitgang op het achterpaneel
- Gecentraliseerde noodstop op de mastercontroller.
- Schakelaar voor handmatig omkeren van de fase voor iedere motoruitgang.
- Keuze uit verschillende uitgangen voor maximale flexibilite

Mounting clamps for heavy-duty applications
For tubes between 48 and 51 mm
Very suitable for aluminium truss (no damage)
Including M12 bolt and wing nut to attach any adapted bracket.

- OMEGA bracket.
- Small version
- Dimensions Small version (center to center) : 106 mm
- Dimensions Large version (center to center) : 141 mm

This is the perfect laser for those that can't choose and simply want it ALL, even 3D-effects and ILDA-control!
Built-in microphone
3-digit LED display for easy menu navigation
Key actuated on/off switch and emergency switch (interlock) input for additional safety
Complies to EN/IEC 60825-1 Ed2, 2007-03 for Laser Safety
Dimensions: 29 x 24 x 11 cm

-Extreem krachtige uitvoer
-2000W hogedruk gegoten verwarmingselement met 45000 cuft/min. (1274m³/min.) uitstoot
-Continue rook ondersteund (bij 50% uitvoer)
-Instelbaar rookvolume 0-100%

-Extreem krachtige uitvoer
-3300W hogedruk gegoten verwarmingselement met 60000 cuft/min. (1699m³/min.) uitstoot
-Continue rook ondersteund (bij 50% uitvoer)
-Instelbaar rookvolume 0-100%

Light - Battery Projectors - BRITEQ

- Mounting clamps for heavy-duty applications
- For tubes between 48 and 51 mm
- Very suitable for aluminium truss (no damage)
- SWL = 300kg (Safe Working Load)
- Including M10 bolt and wing nut to attach any adapted bracket

Four-leaf barndoor which can be easily mounted in front of the PRO BEAMER ZOOM
The 4 flaps can be:
Rotated over 360°
Opened in any position for maximum flexibility
Folded together for compact size during transport

Four-leaf barndoor which can be easily mounted in front of the “Stage beamer RGB”
Allows simultanious use of the included filter frame (use of frost filters)
The 4 flaps can be:
Rotated over 360°
Opened in any position for maximum flexibility
Folded together for compact size during transport

- VERVANGER VOOR DART90i ZOOM!
- The combination of a 60W RGBW led and a very efficient collimator optic 4° lens results in an extremely powerful single beam projector. Thanks to its endless possibilities you can create astonishing light shows!
- High speed ENDLESS ROTATION pan/tilt movements with 16bit resolution (also normal 270° tilt + 540°/630°pan available)
- Thanks to the included 10° and 45° filters
- Dmx 12 and 14ch

- Light source : 15 watt RGBW LED
- Angle : 4° + 10° & 45° lens adapters
- Selectable lamp behavior: halogen lamp (slow) or led (fast)
- White balance adjustment
- Operation Modes : Standalone, DMX
- Included : 10° & 45° lens filter adapters
- Optional : IR-Remote

Deze compacte, stijlvolle 15W WITTE-projector is voorzien van een zeer smalle 4° lens waardoor hij een zeer krachtig hulpmiddel voor allerlei toepassingen wordt: perfect voor allerlei effecten op podia, maar ook voor het verlichten van spiegelbollen enz.

- Light source : 15 watt LED
- CCT : 3200K
- CRI : > 90
- Angle : 4° + 10° & 45° lens adapters
- Selectable lamp behavior: halogen lamp (slow) or led (fast)
- Operation Modes : Standalone, DMX
- Included : 10° & 45° lens filter adapters

-Light source : 15 watt LED
-CRI : > 90
-Angle : 4° + 10° & 45° lens adapters
-Two dimmer options:
-Using a traditional Triac dimmer
-Dimmer knob on the back panel
-Operation Modes : Standalone
-Included : 10° & 45° lens filter adapters
-Warm White (4500k)

-Light source : 15 watt LED
-CRI : > 90
-Angle : 4° + 10° & 45° lens adapters
-Two dimmer options:
-Using a traditional Triac dimmer
-Dimmer knob on the back panel
-Operation Modes : Standalone
-Included : 10° & 45° lens filter adapters
-Warm White (3200k)

- Light source : 15 watt LED
- CRI : > 90
- Angle : 4° + 10° & 45° lens adapters
- Selectable lamp behavior: halogen lamp (slow) or led (fast)
- Operation Modes : Standalone, DMX
- Included : 10° & 45° lens filter adapters
- Neutral White (4500k)

- Light source : 15 watt LED
- CRI : > 90
- Angle : 4° + 10° & 45° lens adapters
- Selectable lamp behavior: halogen lamp (slow) or led (fast)
- Operation Modes : Standalone, DMX
- Included : 10° & 45° lens filter adapters
- Warm White (3200k)

Professional 6 channel Dimmer / Switch pack for 19" rack mounting
Max load 16A (3680W) per channel with automatic 16A circuit breakers
Outputs equipped with French mains sockets (see barcode sticker)
DMX (3p-XLR + RJ11) and analog 0/10V (dB9) inputs
Dimensions: 483x88x312mm (19"/2U)

- Light source : 3 * 5 watt LED
- CRI : > 90
- Angle : 9° (+ extra filters for different angles)
- CCT : 3000K
- Li-ion battery (+/-8hrs use at 100% output)
- Strong magnetic rubber feet
- Operation Modes : Standalone, Wireless DMX
- Included : color filters (CTO/CTB), frost filters,IR remote
- Optional : flight case for 4 sets

- Light source : 4 * 5 watt LED
- CRI : > 90
- Angle : 16,5° (+ extra filters for different angles)
- CCT : 3000K
- Li-ion battery (288Wh, +/-14,5hrs use at 100% output)
- Works also on mains power (batteries are recharged during use)
- The sturdy swivel arm with projectors can be set in 6 fixed positions.
- Operation Modes : Standalone, DMX, Wireless DMX
- Included : color filters (C

- Powerful bubble and fog machine combination with 11 pcs of 8Watt-RGBA LED’s
- Each effect can be used individually or combined to produce bubbles filled with fog
- Equipped with a double fan to blow the bubbles and/or smoke meters away
- Controllable via:
-- 4 or 11 DMX channels
-- Wireless remote control (included)
-- Build-in timer
-- Manual activation
- Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE
- Uses regular water based Bubble Liquid and Fog Liquid.
- Optional omega clamp = Briteq Omega Bracket Small

Powerful indoor / outdoor IP65 LED projector engineered for maximum flexibility in different applications.
Can be used for rental jobs, entertainment industry and fixed installations.
40pcs 20W RGBL-leds assure very high light output with perfect color mixing and excellent white light!
RGB, RGBL and HSI-color control, both 8 & 16 bit resolution.
Extremely multifunctional cabling options:
RENTAL / ENTERTAINMENT applications: standard equipped with 3pin XLR and lockable IP65-Power connector in/outputs for easy daisy chaining.
FIXED installations: with an optional set called “BT-CHROMA 800 - FIX install set” (POWER & DMX in/output modules with stainless-steel cable glands + 2 stainless-steel bolts for fixed TILT-positioning) the projector can very easily be transformed for permanent outdoor installation.
Standard equipped with 15° optics and magnetic aluminum filter frame with frost filter.
Different operation modes with 1, 2, 5 or 10 pixel combinations for nice special effects.
Full DMX-control with RDM-support: from easy 3CH to sophisticated 81CH control
Built-in antenna and Wireless Solution® G4 / G4S DMX-receiver (@ 2.4GHz) for easy setup and use.
Standalone operation with static color & white presets, color fade and over 20 multi-pixel programs.
Different accessories optionally available to obtain perfect results:
Barndoor: adjust the beam easily on stage
Glare shield: static beam limiter hides the LEDs and eliminates unwanted stray light
Different beam shapers: 60° - 60°x 10° - 10°x 60° - 40°x 1° - 1°x 40° to get the perfect beam!
Empty magnetic filter frame: to easily install the different beam shapers
Elegant, extruded aluminum housing finished with tempered glass cover.
Solid and multifunctional base:
Truss installation: easy truss mounting, thanks to the included standard OMEGA brackets
Fixed installation: easy and secure mounting on any surface, using standard anchor bolts.
Optimal thermal management for long lifespan and easy maintenance
Very silent operation, thanks to temperature controlled waterproof cooling fans.
Alphanumeric OLED-display and waterproof touch keys to select different options of the setup menu.
Adaptable lamp behavior thanks to seamless dimmer speed control.
Four dimmer curves: linear, square, inverse square, S-curve
In case of DMX failure, you can choose between blackout, freeze mode and automatic stand-alone mode.
Lock function to avoid unwanted altering of the settings.
Equipped with a special GORE® vent to prevent moisture and condensation inside the projector.

- Light source : 120 watt RGBW LED
- Angle : 15°
- Selectable lamp behavior: halogen lamp (slow) or led (fast)
- White balance adjustment
- Operation Modes : Standalone, DMX
- Optional : 3pin to 5pin XLR modification kit