Product Type: Mixer Amplifier with BT
Frequency Response (-6dB): 80Hz - 16kHz
Amplifier Technology: D Class Amplifier
Amplifier Power: 120W
Speaker Output: 100V
THD+N: <0.5%
SNR (Signal to Noise Ratio): Mic: >74dB | Line-in: >80dB
Input Sensitivity: Mic: 60mV (±15mV) | Line-in : 300mV(±20mV)
Mixer: 3 Channels
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Audio Signal Inputs: BT | Microphone | CD Player | USB
Input Connectors: 1 x Stereo RCA | 1 x MIC (TS) | 1 x MIC or AUX (XLR) | 1 x Line-in (Phoenix Connector) | 1 x 100V IN (Phoenix Connector) | 1 x USB A Type
Audio Signal Outputs: Line Audio
Output Connectors: 1 x Stereo RCA
Protections: DC Voltage | Overload | Short-Circuit
Cooling Type: Speed Controlled Fan
Power Input: AC 180V - 250V / 50Hz - 60Hz and/or DC 24V - 6A
Power Consumption: 150W
Special Features: Ducking | Priority Mic. | Phantom Power (+48V) | Bass Adjust.: ±10dB (100Hz) | Treble Adjust.: ±10dB (10kHz)
Construction: Aluminum / Steel
IP Rating: Indoor Use
Dimensions (WxHxD): 200 x 44 x 190mm (7.9" x 1.7" x 7.5")
Net Weight: 1.5kg (3.3lb)
Shipping Weight: 2kg (4.4lb)

Product Type: Multi-Zone Mixer Amplifer with built in usb/sd card reader and fm tuner
Frequency Response (-6dB): 80Hz - 16kHz
Amplifier Technology: AB Class Amplifier
Amplifier Power: 350W
Speaker Output: 100V | 4Ω - 16Ω
Zones Output: 6 Zones
THD+N: <1%
SNR (Signal to Noise Ratio): Mic: >71dB | Line-in: >85dB
Input Sensitivity: Mic: 3mV (±0.5mV) | Line-in : 300mV(±50mV)
Mixer: 7 Channels
Audio Signal Inputs: Microphone | CD Player | USB | SD Card | FM Radio | BT
Input Connectors: 3 x Stereo RCA | 4 x MIC (TS) | USB | SD Card Slot | FM Antenna (75Ω)
Audio Signal Outputs: Line Audio
Output Connectors: 1 x Stereo RCA
Speakers Output Connectors: Low Impedance: Binding Posts | 100V: Screw Connector
Protections: DC Voltage | Overload | Short-Circuit
Cooling Type: Speed Controlled Fan
Power Input: AC 220V - 240V / 50Hz - 60Hz
Power Consumption: 650W (3A)
Special Features: Chime | Ducking | Priority Microphone | Bass Adjust.: ±10dB (100Hz) | Treble Adjust.: ±10dB (10kHz)
Fittings: 2U 19" Rack
Handles: Two on Front
Construction: Aluminum / Steel
IP Rating: Indoor Use
Dimensions (WxHxD): 483 x 88 x 338mm (19" x 3.5" x 13.3")
Net Weight: 16kg (35.3lb)
Shipping Weight: 17kg (37.5lb)

Product Type: Class D Amplifier with DSP
Frequency Response: 20Hz - 20kHz (+0 / -1dB)
Amplifier Technology: Class D
Number of Amplifier Channels: 4 Channels
Amplifier Power - Stereo 8Ω: 4 x 250W
Amplifier Power - Stereo 4Ω: 4 x 500W
Amplifier Power - Bridge 8Ω: 2 x 1000W
Amplifier Gain: 34dB±0.5dB
Speaker Output: 4Ω - 16Ω
Damping Factor: >180
THD+N: <0.15%
SNR (Signal to Noise Ratio): >95dB
Crosstalk: >50dB
Input Sensitivity: 0.9V - 1.1V (+0 / -1dBv)
Input Impedance: Balanced: 20kΩ | Unbalanced: 10kΩ
DSP Technology: 4 IN x 4 OUT - 32bit | 192kHz DSP
Latency: 0.66ms
DSP Adjustable Parameters: PEQ, HPF, LPF, HSF, LSF, Compressor, Gate, Level, Delay, Polarity, Mute
Delay Adjustment: 62.4ms / 21.42m per Channel
Control Type: On the Amplifier Encoder and LCD | Via USB and Suplied Software "A504 DSP Controller"
Audio Signal Inputs: Analog Audio
Input Connectors: 4 x Neutrik XLR
Audio Signal Outputs: None
Output Connectors: None
Speakers Output Connectors: 4 x Neutrik NL4
Protections: Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar
Operating Temperature Range: 0ºC - 40ºC
Cooling Type: Speed Controlled Fan
Power Supply: Switching Mode Power Supply (SMPS)
Power Input: AC 110V - 120V | AC 220V - 240V 50Hz/60Hz ±10%
Mains Connector: Standard IEC socket
Power Consumption: 1100W
Fittings: 1U 19" Rack
Dimensions (WxHxD): 483 x 44 x 290mm (19 x 1.73 x 11.4 in)
Net Weight: 6kg (13.2lb)
Shipping Weight: 7.2kg (2.2 lb)

Product Type: 2-Way Premium Ceiling Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 40W (8Ω)
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω (Transformer bypass)
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 109dB
Transformer Taps 100V: 2.5W | 5W | 10W
Transformer Taps 70V: 1.25W | 2.5W | 5W
Low Frequency Driver: 5.25" Reinforced Polymer Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Titanium Dome Tweeter
Input Connectors: Gold Plated Binding Posts (8Ω) / Quick Release Connector (100V)
Recommended Amplifier: A40 | A200 | MX120 | MX350
Special Features: Adjustable Environment Equalizer (±3dB)
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 204mm x 78mm (8" x 3.1")
Cutout Diameter: 179mm (7")
Mounting Depth: 78mm (3.1")
Wall / Ceiling Thickness: 3mm to 15mm (0.12" to 0.59")
Fixation: Plastic Clamps for Ceiling Fixation
Net Weight: 1.2kg (2.6lb)
Shipping Weight: 1.5kg (3.3lb)
Accessories: Black Frameless Magnetic Grille (not included)

Product Type: 2-Way Premium Ceiling Speaker (8Ω/100V)
Frequency Response (-6dB): 65Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (Transformer bypass)
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 110.8dB
Transformer Taps 100V: 7.5W | 15W | 30W
Transformer Taps 70V: 3.75W | 7.5W | 15W
Low Frequency Driver: 6.5" Reinforced Polymer Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Titanium Dome Tweeter
Input Connectors: Gold Plated Binding Posts (8Ω) / Quick Release Connector (100V)
Recommended Amplifier: A40 | A200 | MX120 | MX350
Special Features: Adjustable Environment Equalizer (±3dB)
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 234mm x 87mm (9.21" x 3.43")
Cutout Diameter: 210mm (8.3")
Mounting Depth: 87mm (3.4")
Wall / Ceiling Thickness: 3mm to 15mm (0.12" to 0.59")
Fixation: Plastic Clamps for Ceiling Fixation
Net Weight: 1.79kg (3.94lb)
Shipping Weight: 2.1kg (4.6lb)
Accessories: Black Frameless Magnetic Grille (not included)

Product Type: 100V Ceiling Speaker
Frequency Response (-10dB): 70Hz - 16kHz
Nominal Coverage (-6dB): 85º Conical
RMS Power: 6W
Nominal Impedance: 1667Ω | 3333Ω | 6666Ω
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 97.8dB
Transformer Taps 100V: 1.5W | 3W | 6W
Transformer Taps 70V: 0.75W | 1.5W | 3W
Full-Range Driver: 6.5" Dual Cone Woofer
Input Connectors: Quick Release Connector
Recommended Amplifier: MX120 | MX350
Standards: In compliance with IEC268-5
Grille: White Aluminum Frameless Grille RAL9003 (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 190mm x 79mm (7.48" x 3.11")
Cutout Diameter: 170mm (6.7")
Mounting Depth: 80mm (3.15")
Wall / Ceiling Thickness: 5mm to 35mm (0.2" to 1.38")
Fixation: Metal Clamps for Ceiling Fixation
Net Weight: 0.67kg (1.5lb)
Shipping Weight: 0.96kg (2.1lb)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount / Garden Mount (not included)
Net Weight: 1.6kg (3.53lb)
Shipping Weight: 2.4kg (5.29lb)
Accessories: Wall Bracket for P4 (not included) | Garden Accessory for P4 (not included)

- Product Type: Full-Range Pendant Speaker (8Ω/100V)
- Freq. Response (-6dB): 90Hz - 20kHz
- Nominal Coverage: 90º Conical
- RMS Power: 40W
- Program Power: 80W (8Ω)
- Nominal Impedance: 8Ω
- Sensitivity (1W, 1m): 85dB
- Max. SPL (calculated): 104dB
- Transformer Taps 100V: 5W, 10W, 20W, 40W
- Transformer Taps 70V: 2.5W, 5W, 10W, 20W
- Low Freq. Driver: 6,5" Polypropylene Cone Woofer
- High Freq. Driver: 1" Silk Dome Tweeter
- Input Connectors: Phoenix Type Pluggable Terminal Block
- Recommended Amplifier: MX120, MX350
- Grille: Alu Grille, Detachable Logo
- Product Material: High-grade Rugged Polypropylene
- Dimensions: 208 x 280 x 208mm
- Net weight: 3kg
- IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount (not included)
Net Weight: 1.6kg (3.53lb)
Shipping Weight: 2.4kg (5.29lb)
Accessories: Wall Bracket for P4W (not included)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket)
Dimensions (WxHxD): 208 x 280 x 208mm (8.2 x 11 x 8.2 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount (not included)
Net Weight: 3kg (6.61lb)
Shipping Weight: 4kg (8.82lb)
Accessories: Wall Bracket for P6W (not included)

Product Type: Full-Range Wall Speaker
Frequency Response (-6dB): 100Hz - 20kHz
Nominal Coverage (-6dB): 110º H x 110º V
RMS Power: 25W
Program Power: 50W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 106dB
Low Frequency Driver: 5.25" Inverted Magnet Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Spring Loaded Terminal
Recommended Amplifier: A40 | A200
Special Features: Ultra-Slim Design
Fittings: Hanging Hole
Grille: Acoustic Transparent Grille | Detachable Logo
Construction: ABS Plastic
IP Rating: Indoor Use
Dimensions (WxHxD): 183 x 271 x 38mm (7.2" x 10.67" x 1.5")
Fixation: Picture Frame Hanging Type
Net Weight: 0.9kg (1.98lb)
Shipping Weight: 2.2kg (4.85lb)

Product Type: Full-Range Wall Speaker
Frequency Response (-6dB): 100Hz - 20kHz
Nominal Coverage (-6dB): 110º H x 110º V
RMS Power: 25W
Program Power: 50W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 106dB
Low Frequency Driver: 5.25" Inverted Magnet Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Spring Loaded Terminal
Recommended Amplifier: A40 | A200
Special Features: Ultra-Slim Design
Fittings: Hanging Hole
Grille: Acoustic Transparent Grille | Detachable Logo
Construction: ABS Plastic
IP Rating: Indoor Use
Dimensions (WxHxD): 183 x 271 x 38mm (7.2" x 10.67" x 1.5")
Fixation: Picture Frame Hanging Type
Net Weight: 0.9kg (1.98lb)
Shipping Weight: 2.2kg (4.85lb)

Product Type: Mini Satellite Passive Speaker
Frequency Response (-6dB): 150Hz - 20kHz
Nominal Coverage (-6dB): 120º Conical
RMS Power: 15W
Program Power: 30W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 87dB
Maximum SPL (calculated): 102dB
Full-Range Driver: 2.75" Full-Range Loudspeaker
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200
Special Features: Built-in High-Pass Filter
Grille: Acoustic Transparent Plastic Grille
Construction: Rugged ABS Plastic
IP Rating: Indoor Use
Dimensions (WxHxD): 95 x 93 x 108mm (3.7" x 3.7" x 4.3")
Fixation: Ball-Joint Wall Bracket (included)
Net Weight: 0.5kg (1.1lb)
Shipping Weight: 1.2kg (2.6lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 20W
Program Power: 40W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 86dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 140 x 215 x 135mm (5.5" x 8.4" x 5.3") [W4] | 140 x 245 x 158mm (5.5" x 9.6" x 6.2") [W4 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 1.8kg (3.97lb) [W4 + U-Bracket]
Shipping Weight: 4kg (8.82lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 3.75W | 7.5W | 15W | 30W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 205 x 310 x 195mm (8" x 12.2" x 7.6") [W6] | 205 x 345 x 225mm (8" x 13.5" x 8.8") [W6 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 4kg (8.82lb) [W6 + U-Bracket]
Shipping Weight: 8.5kg (18.74lb)

Product Type: 2-Way All-Weather Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 60Hz - 20kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 114.8dB
Transformer Taps 100V: 10W | 20W | 30W | 40W
Low Frequency Driver: 8" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: UV Stabilised High Grade Polypropylene
IP Rating: IP55
Dimensions (WxHxD): 250 x 410 x 260mm (9.8 x 16.1 x 10.2 in) [W8] | 250 x 410 x 290mm (9.8 x 16.1 x 11.4 in) [W8 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 5.8kg (12.79lb) [W8 + U-Bracket]
Shipping Weight: 15kg (33.07lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 20W
Program Power: 40W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 86dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 140 x 215 x 135mm (5.5" x 8.4" x 5.3") [W4] | 140 x 245 x 158mm (5.5" x 9.6" x 6.2") [W4 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 1.8kg (3.97lb) [W4 + U-Bracket]
Shipping Weight: 4kg (8.82lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 3.75W | 7.5W | 15W | 30W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 205 x 310 x 195mm (8" x 12.2" x 7.6") [W6W] | 205 x 345 x 225mm (8" x 13.5" x 8.8") [W6W + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 4kg (8.82lb) [W6W + U-Bracket]
Shipping Weight: 8.5kg (18.74lb)

Product Type: 2-Way All-Weather Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 60Hz - 20kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 114.8dB
Transformer Taps 100V: 10W | 20W | 30W | 40W
Low Frequency Driver: 8" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: UV Stabilised High Grade Polypropylene
IP Rating: IP55
Dimensions (WxHxD) :250 x 410 x 260mm (9.8 x 16.1 x 10.2 in) [W8] | 250 x 410 x 290mm (9.8 x 16.1 x 11.4 in) [W8 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 5.8kg (12.79lb) [W8 + U-Bracket]
Shipping Weight: 15kg (33.07lb)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 1.85kg (4.08lb)
Shipping Weight: 2.7kg (5.95lb)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 208 x 280 x 208mm (8.19" x 11" x 8.19")
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 3.3kg (7.28lb)
Shipping Weight: 4.3kg (9.48lb)
Accessories: Garden Accessory for P6 (not included)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 1.85kg (4.08lb)
Shipping Weight: 2.7kg (5.95lb)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 208 x 280 x 208mm (8.19" x 11" x 8.19")
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 3.3kg (7.28lb)
Shipping Weight: 4.3kg (9.48lb)
Accessories: Garden Accessory for P6 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 120° H x 90º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 107dB
Transformer Taps 100V: 10W | 20W | 40W
Low Frequency Driver: 4" Woofer
High Frequency Driver: 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 140 x 230 x 172mm (5.5 x 9 x 6.8 in)
Fixation: Wall U-Bracket (included)
Net Weight: 2.8kg (6.2lb)
Shipping Weight: 7kg (15.4lb)
Accessories: Ball-Joint Wall Bracket for T4 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 75º V
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 111dB
Transformer Taps 100V: 20W | 40W | 80W
Low Frequency Driver: 6.5" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 182 x 362 x 226mm (7.2 x 14.3 x 8.9 in)
Fixation: Wall U-Bracket (included)
Net Weight: 6.5kg (14.3lb)
Shipping Weight: 15.6kg (34.4lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 90° H x 50º V
RMS Power: 150W
Program Power: 300W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 119dB
Transformer Taps 100V: 37.5W | 75W | 150W
Low Frequency Driver: 8" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 240 x 450 x 287mm (9.4 x 17.7 x 11.3 in)
Fixation: Wall U-Bracket (included)
Net Weight: 10.7kg (23.6lb)
Shipping Weight: 12.2kg (26.9lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 120° H x 90º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 107dB
Transformer Taps 100V: 10W | 20W | 40W
Low Frequency Driver: 4" Woofer
High Frequency Driver: 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 140 x 230 x 172mm (5.5 x 9 x 6.8 in)
Fixation: Wall U-Bracket (included)
Net Weight: 2.8kg (6.2lb)
Shipping Weight: 7kg (15.4lb)
Accessories: Ball-Joint Wall Bracket for T4W (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 75º V
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 111dB
Transformer Taps 100V: 20W | 40W | 80W
Low Frequency Driver: 6.5" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 182 x 362 x 226mm (7.2 x 14.3 x 8.9 in)
Fixation: Wall U-Bracket (included)
Net Weight: 6.5kg (14.3lb)
Shipping Weight: 15.6kg (34.4lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 90° H x 50º V
RMS Power: 150W
Program Power: 300W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 119dB
Transformer Taps 100V: 37.5W | 75W | 150W
Low Frequency Driver: 8" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 240 x 450 x 287mm (9.4 x 17.7 x 11.3 in)
Fixation: Wall U-Bracket (included)
Net Weight: 10.7kg (23.6lb)
Shipping Weight: 12.2kg (26.9lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 1.85kg (4.08lb)
Shipping Weight: 2.7kg (5.95lb)

Product Type: Full-Range Wall Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 208 x 280 x 208mm (8.19" x 11" x 8.19")
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount
Net Weight: 3.3kg (7.28lb)
Shipping Weight: 4.3kg (9.48lb)
Accessories: Garden Accessory for P6 (not included)

Product Type: Multi-Zone Mixer Amplifer
Frequency Response (-6dB): 80Hz - 16kHz
Amplifier Technology: AB Class Amplifier
Amplifier Power: 350W
Speaker Output: 100V | 4Ω - 16Ω
Zones Output: 6 Zones
THD+N: <1%
SNR (Signal to Noise Ratio): Mic: >71dB | Line-in: >85dB
Input Sensitivity: Mic: 3mV (±0.5mV) | Line-in : 300mV(±50mV)
Mixer: 7 Channels
Audio Signal Inputs: Microphone | CD Player | USB | SD Card | FM Radio | BT
Input Connectors: 3 x Stereo RCA | 4 x MIC (TS) | USB | SD Card Slot | FM Antenna (75Ω)
Audio Signal Outputs: Line Audio
Output Connectors: 1 x Stereo RCA
Speakers Output Connectors: Low Impedance: Binding Posts | 100V: Screw Connector
Protections: DC Voltage | Overload | Short-Circuit
Cooling Type: Speed Controlled Fan
Power Input: AC 220V - 240V / 50Hz - 60Hz
Power Consumption: 650W (3A)
Special Features: Chime | Ducking | Priority Microphone | Bass Adjust.: ±10dB (100Hz) | Treble Adjust.: ±10dB (10kHz)
Fittings: 2U 19" Rack
Handles: Two on Front
Construction: Aluminum / Steel
IP Rating: Indoor Use
Dimensions (WxHxD): 483 x 88 x 338mm (19" x 3.5" x 13.3")
Net Weight: 16kg (35.3lb)
Shipping Weight: 17kg (37.5lb)

Product Type: Full-Range Garden Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 190 x 380 x 190mm (7.5 x 15 x7.5 in)
Fixation: Eye Bolt for Suspension | Bracket for Garden Mount
Net Weight: 2.35kg (5.18lb)
Shipping Weight: 3.3kg (7.28lb)

Product Type: Full-Range Garden Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 234 x 537 x 234mm (9.2" x 21.1" x 9.2")
Fixation: Eye Bolt for Suspension | Bracket for Garden Mount
Net Weight: 3.9kg (8.6lb)
Shipping Weight: 5kg (11lb)

Product Type: Full-Range Garden Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 190 x 380 x 190mm (7.5 x 15 x7.5 in)
Fixation: Eye Bolt for Suspension | Bracket for Garden Mount
Net Weight: 2.35kg (5.18lb)
Shipping Weight: 3.3kg (7.28lb)

Product Type: Garden Accessory for P6
Special Features: Adjustable Tilt Angle
Dimensions (WxHxD): 234 x 307 x 234mm (9.21" x 12" x 9.21")
Fixation: Buried in the Ground |Screwed to a Rigid Surface
Net Weight: 0.9kg (1.98lb)
Shipping Weight: 1kg (2.2lb)

Product Type: 2-Way BT Premium Ceiling Speakers
Frequency Response (-6dB): 62Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (C6B Pro Slave)
Amplifier Power: 30W + 30W (C6B PRO Slave Speaker Output)
DSP Presets: Classical | Vocal Enhance | Flat | Bass Enhance | Bass Cut | Treble Enhance | Treble Cut | Pop | Rock | Jazz
Wireless Connection System: BT v5.0 aptX LL
Wireless Range: >10m (32.8ft)
Maximum SPL (calculated): 107.8dB (2 Coupled Speakers)
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Silk Dome Tweeter
Audio Signal Inputs: Stereo BT | Audio Line-in
Input Connectors: 1 x Stereo RCA (Master Speaker) | Gold Plated Binding Posts (Slave Speaker)
Power Input: Power Supply: AC 100V - 240V | DC 24V- 2.5A Output
Power Consumption: 60W
Special Features: Tool Free Install | Remote Control | 50% Level Limiter | Mono-Stereo Switch
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 234mm x 105mm (9.21" x 4.1")
Cutout Diameter: 209mm (8.2")
Mounting Depth: 102mm (4")
Wall / Ceiling Thickness: 7mm to 20mm (0.28" to 0.79")
Fixation: Specially Designed Dog Legs Ceiling Fixation
Net Weight: Master - 1.5kg (3.3lb) | Slave - 1.5kg (3.3lb)
Shipping Weight: 4.5kg (9.9lb)
Accessories: Black Frameless Magnetic Grille (not included)

Product Type: Convertible Soundbar with BT
Frequency Response (-6dB): 100Hz - 18kHz
RMS Power: 15W + 15W
Amplifier Technology: Class D Amplifier with DSP
DSP Presets: Rock, Pop, Jazz, Live, Club, Dance, Hall, Soft, Flat, Classical
Wireless Connection System: BT v5.0
Wireless Range: >10m (32.8ft)
Full-Range Driver: 4 x 2" Full-Range Loudspeaker
Audio Signal Inputs: Stereo BT | AUX | Optical | USB | Micro SD Card
Input Connectors: 3.5mm Stereo Jack | Optical Cable | USB | Micro SD Slot
Audio Signal Outputs: Subwoofer or Other System Output (Unfiltered, Full-Range)
Output Connectors: 1 x RCA
Power Input: Power Supply: AC 100V - 240V / 50Hz-60Hz | DC 15V - 2A
Power Consumption: 30W
Special Features: Soundbar Convertible into Stereo Sound System (2 Vertical Systems)
Fittings: Plastic Feet | Multi-Directional Hanging Holes
IP Rating: Indoor Use
Dimensions (WxHxD): 980 x 55 x 60mm (38.6" x 2.2" x 2.4") [Soundbar] | 55 x 490 x 60mm (2.2" x 19.3" x 2.4") [Vertical System]
Fixation: Picture Frame Hanging Type
Net Weight: 1.6kg (3.5lb)
Shipping Weight: 2.3kg (5lb)

Product Type: Active Down-Firing Subwoofer
Frequency Response (-6dB): 32Hz - 200Hz
RMS Power: 100W
Program Power: 200W
Speaker Output: High Level Output (needs a pre-amplified signal input)
Subwoofer Driver: 10" Polypropylene Subwoofer
Audio Signal Inputs: Stereo Line-in | High Level Input
Input Connectors: 2 x RCA (Stereo) | 2 x Spring Loaded Terminal Blocks
Output Connectors: 2 x Spring Loaded Terminal Blocks
Cooling Type: Convection
Power Input: AC 115V/230V / 50Hz-60Hz (Auto Adjust)
Special Features: Invisible Down-Firing Speaker | Low-Pass Filter Frequency Adjustment
Construction: Non-Resonant MDF
IP Rating: Indoor Use
Dimensions (WxHxD): 300 x 394 x 328mm (11.8" x 15.5" x 12.9")
Net Weight: 9.5kg (21lb)
Shipping Weight: 12kg (26.5lb)

Product Type: Active Down-Firing Subwoofer
Frequency Response (-6dB): 32Hz - 200Hz
RMS Power: 100W
Program Power: 200W
Speaker Output: High Level Output (needs a pre-amplified signal input)
Subwoofer Driver: 10" Polypropylene Subwoofer
Audio Signal Inputs: Stereo Line-in | High Level Input
Input Connectors: 2 x RCA (Stereo) | 2 x Spring Loaded Terminal Blocks
Output Connectors: 2 x Spring Loaded Terminal Blocks
Cooling Type: Convection
Power Input: AC 115V/230V / 50Hz-60Hz (Auto Adjust)
Special Features: Invisible Speaker | Low-Pass Filter Frequency Adjustment
Construction: Non-Resonant MDF
IP Rating: Indoor Use
Dimensions (WxHxD): 300 x 394 x 328mm (11.8" x 15.5" x 12.9")
Net Weight: 9.5kg (21lb)
Shipping Weight: 12kg (26.5lb)